2,168 research outputs found
Synchroscan streak camera imaging at a 15-MeV photoinjector with emittance exchange
At the Fermilab A0 photoinjector facility, bunch-length measurements of the
laser micropulse and the e-beam micropulse have been done in the past with a
fast single-sweep module of the Hamamatsu C5680 streak camera with an intrinsic
shot-to-shot trigger jitter of 10-20ps. We have upgraded the camera system with
the synchroscan module tuned to 81.25MHz to provide synchronous summing
capability with less than 1.5ps FWHM trigger jitter and a phase-locked delay
box to provide phase stability of ~1ps over 10s of minutes. These steps allowed
us to measure both the UV laser pulse train at 263nm and the e-beam via optical
transition radiation (OTR). Due to the low electron beam energies and OTR
signals, we typically summed over 50 micropulses with 0.25-1nC per micropulse.
The phase-locked delay box allowed us to assess chromatic temporal effects and
instigated another upgrade to an all-mirror input optics barrel. In addition,
we added a slow sweep horizontal deflection plug-in unit to provide dual-sweep
capability for the streak camera. We report on a series of measurements made
during the commissioning of these upgrades including bunch-length and phase
effects using the emittance exchange beamline and simultaneous imaging of a UV
drive laser component, OTR, and the 800nm diagnostics laser.Comment: 26 p
Conversion of a transverse density modulation into a longitudinal phase space modulation using an emittance exchange technique
We report on an experiment to produce a train of sub-picosecond microbunches
using a transverse-to-longitudinal emittance exchange technique. The generation
of a modulation on the longitudinal phase space is done by converting an
initial horizontal modulation produced using a multislits mask. The preliminary
experimental data clearly demonstrate the conversion process. To date only the
final energy modulation has been measured. However numerical simulations, in
qualitative agreement with the measurements, indicate that the conversion
process should also introduce a temporal modulation.Comment: 4 pages, 6 figures. Submitted to the proceedings of the Physics and
Applications of High-Brightness Electron Beams (HBEB09), Nov. 16-19, 2009,
Maui H
THE END OF SUPPLY CONTROLS: THE ECONOMIC EFFECTS OF RECENT CHANGE IN FEDERAL PEANUT POLICY
The paper analyzes recent changes in U.S. peanut policy as enacted in the 2002 Farm Security Act. A model representing the impact of the 2002 farm bill on the domestic and foreign prices of edible peanuts is constructed and the gains and losses to peanut producing states are measured.Agricultural and Food Policy,
Gas Turbine Characteristics for a Large Civil Tilt-Rotor (LCTR)
In support of the Fundamental Aeronautics Program, Subsonic Rotary Wing Project; an engine system study has been undertaken to help define and understand some of the major gas turbine engine parameters required to meet performance and weight requirements as defined by earlier vehicle system studies. These previous vehicle studies will be reviewed to help define gas turbine performance goals. Assumptions and analysis methods used will be described. Performance and weight estimates for a few conceptual gas turbine engines meeting these requirements will be given and discussed. Estimated performance for these conceptual engines over a wide speed variation (down to 50 percent power turbine rpm at high torque) will be presented. Finally, areas needing further effort will be suggested and discussed
Effects of Gas Turbine Component Performance on Engine and Rotary Wing Vehicle Size and Performance
In support of the Fundamental Aeronautics Program, Subsonic Rotary Wing Project, further gas turbine engine studies have been performed to quantify the effects of advanced gas turbine technologies on engine weight and fuel efficiency and the subsequent effects on a civilian rotary wing vehicle size and mission fuel. The Large Civil Tiltrotor (LCTR) vehicle and mission and a previous gas turbine engine study will be discussed as a starting point for this effort. Methodology used to assess effects of different compressor and turbine component performance on engine size, weight and fuel efficiency will be presented. A process to relate engine performance to overall LCTR vehicle size and fuel use will also be given. Technology assumptions and levels of performance used in this analysis for the compressor and turbine components performances will be discussed. Optimum cycles (in terms of power specific fuel consumption) will be determined with subsequent engine weight analysis. The combination of engine weight and specific fuel consumption will be used to estimate their effect on the overall LCTR vehicle size and mission fuel usage. All results will be summarized to help suggest which component performance areas have the most effect on the overall mission
Designing displaced lunar orbits using low-thrust propulsion
The design of spacecraft trajectories is a crucial task in space mission design. Solar sail technology appears as a promising form of advanced spacecraft propulsion which can enable exciting new space science mission concepts such as solar system exploration and deep space observation. Although solar sailing has been considered as a practical means of spacecraft propulsion only relatively recently, the fundamental ideas are by no means new (see McInnes1 for a detailed description). A solar sail is propelled by re ecting solar photons and therefore can transform the momentum of the photons into a propulsive force. This article focuses on designing displaced lunar orbits using low-thrust propulsion
Measurements and computational analysis of heat transfer and flow in a simulated turbine blade internal cooling passage
Visual and quantitative information was obtained on heat transfer and flow in a branched-duct test section that had several significant features of an internal cooling passage of a turbine blade. The objective of this study was to generate a set of experimental data that could be used to validate computer codes for internal cooling systems. Surface heat transfer coefficients and entrance flow conditions were measured at entrance Reynolds numbers of 45,000, 335,000, and 726,000. The heat transfer data were obtained using an Inconel heater sheet attached to the surface and coated with liquid crystals. Visual and quantitative flow field results using particle image velocimetry were also obtained for a plane at mid channel height for a Reynolds number of 45,000. The flow was seeded with polystyrene particles and illuminated by a laser light sheet. Computational results were determined for the same configurations and at matching Reynolds numbers; these surface heat transfer coefficients and flow velocities were computed with a commercially available code. The experimental and computational results were compared. Although some general trends did agree, there were inconsistencies in the temperature patterns as well as in the numerical results. These inconsistencies strongly suggest the need for further computational studies on complicated geometries such as the one studied
Analysis of selected herbicide metabolites in surface and ground water of the United States
One of the primary goals of the US Geological Survey (USGS) Laboratory in Lawrence, Kansas, is to develop analytical methods for the analysis of herbicide metabolites in surface and ground water that are vital to the study of herbicide fate and degradation pathways in the environment. Methods to measure metabolite concentrations from three major classes of herbicides ─ triazine, chloroacetanilide and phenyl-urea ─ have been developed. Methods for triazine metabolite detection cover nine compounds: six compounds are detected by gas chromatography/mass spectrometry; one is detected by high-performance liquid chromatography with diode-array detection; and eight are detected by liquid chromatography/mass spectrometry. Two metabolites of the chloroacetanilide herbicides ─ ethane sulfonic acid and oxanilic acid ─ are detected by high-performance liquid chromatography with diode-array detection and liquid chromatography/mass spectrometry. Alachlor ethane sulfonic acid also has been detected by solid-phase extraction and enzyme-linked immunosorbent assay. Six phenylurea metabolites are all detected by liquid chromatography/mass spectrometry; four of the six metabolites also are detected by gas chromatography/mass spectrometry. Additionally, surveys of herbicides and their metabolites in surface water, ground water, lakes, reservoirs, and rainfall have been conducted through the USGS laboratory in Lawrence. These surveys have been useful in determining herbicide and metabolite occurrence and temporal distribution and have shown that metabolites may be useful in evaluation of non-point-source contamination
- …