NM-300 Silver Characterisation, Stability, Homogeneity

This report describes the characteriation of NM-300, a nano-silver reference material used in the context of risk and exposure assessment studies. The material was produced in the context of the JRC IHCP activity on nano-materials. A representative set test items was handed over to the JRC IES analytical laboratory for further characterisation. First, inorganic chemical characterisation of the total silver content and the homogeneity of the Ag-distribution was done using ICP-AES. To this end, a dedicated method was developed and validated according to the requirements laid down in ISO 17025. This works were completed by different types of microscopy analyses (Scanning Electron Microscope, Transmission Electron Microscope and Nanoparticle Tracking Analysis) performed in close collaboration with the German Institute of Energy and Environmental Technology e.V. (IUTA), the Swiss Federal Laboratories for Materials Science and Technology (EMPA) and Belgium Veterinary and Agrochemical Research Centre (VAR). This report summarises all technical details and discusses the assessments made.JRC.DG.I.5-Nanobioscience

Reference materials for measuring the size of nanoparticles

This article discusses the requirements for reference materials (RMs) for measuring the size of nanoparticles (NPs). Such RMs can be used for instrument calibration, statistical quality control or interlaboratory comparisons. They can come in the form of suspensions, powders or matrix-embedded materials [i.e. NPs integrated in a natural matrix (e.g., food, soil, or sludge)]. At present, uncertainty about the most suitable form of material, the most relevant measurands and the most useful metrological-traceability statement inhibits the production of NP RMs. In addition, the lack of validated methods and qualified laboratories to produce NP RMs present formidable challenges. Metal, inorganic and organic NPs are available, but most of them are intended to be laboratory chemicals. With the exception of latex materials, certified RMs are not available, although some metrology institutes have started to develop such materials for colloidal gold and silica particles.The financial support by the European Commission through the 7th Framework Program, Contract No. 245162, Nanoparticles in Food: Analytical methods for detection and characterization (NanoLyse) is gratefully acknowledged.Peer reviewe

Production of reference materials for the detection and size determination of silica nanoparticles in tomato soup

A set of four reference materials for the detection and quantification of silica nanoparticles (NPs) in food was produced as a proof of principle exercise. Neat silica suspensions were ampouled, tested for homogeneity and stability, and characterized for total silica content as well as particle diameter by dynamic light scattering (DLS), electron microscopy (EM), gas-phase electrophoretic molecular mobility analysis (GEMMA), and field-flow fractionation coupled with an inductively coupled mass spectrometer (FFF-ICPMS). Tomato soup was prepared from ingredients free of engineered nanoparticles and was spiked at two concentration levels with the silica NP suspension. Homogeneity of these materials was found sufficient to act as reference materials and the materials are sufficiently stable to allow long-term storage and distribution at ambient temperature, providing proof of principle of the feasibility of producing liquid food reference materials for the detection of nanoparticles. The spiked soups were characterized for particle diameter by EM and FFF-ICPMS (one material only), as well as for the total silica content. Although questions regarding the trueness of the results from EM and FFF-ICPMS procedures remain, the data obtained indicate that even assigning values should eventually be feasible. The materials can therefore be regarded as the first step towards certified reference materials for silica nanoparticles in a food matrix