18,151 research outputs found
Mass modeling for bars
Methods of modeling mass for bars are surveyed. A method for extending John Archer's concept of consistent mass beyond just translational inertia effects is included. Recommendations are given for various types of modeling situations
Modeling a ball screw/ball nut in substructuring
In the particular NASTRAN application discussed here, a nut was attached to a stationary structure. The object of the analysis was to determine the vibration characteristics of the whole structure for various configurations; i.e., the evaluation of the mode shapes and frequencies when parts were moved to different mating positions. Details of the analysis are given
Eigenvalue computations with the QUAD4 consistent-mass matrix
The NASTRAN user has the option of using either a lumped-mass matrix or a consistent- (coupled-) mass matrix with the QUAD4 shell finite element. At the Sixteenth NASTRAN Users' Colloquium (1988), Melvyn Marcus and associates of the David Taylor Research Center summarized a study comparing the results of the QUAD4 element with results of other NASTRAN shell elements for a cylindrical-shell modal analysis. Results of this study, in which both the lumped-and consistent-mass matrix formulations were used, implied that the consistent-mass matrix yielded poor results. In an effort to further evaluate the consistent-mass matrix, a study was performed using both a cylindrical-shell geometry and a flat-plate geometry. Modal parameters were extracted for several modes for both geometries leading to some significant conclusions. First, there do not appear to be any fundamental errors associated with the consistent-mass matrix. However, its accuracy is quite different for the two different geometries studied. The consistent-mass matrix yields better results for the flat-plate geometry and the lumped-mass matrix seems to be the better choice for cylindrical-shell geometries
Modeling an electric motor in 1-D
Quite often the dynamicist will be faced with having an electric drive motor as a link in the elastic path of a structure such that the motor's characteristics must be taken into account to properly represent the dynamics of the primary structure. He does not want to model it so accurately that he could get detailed stress and displacements in the motor proper, but just sufficiently to represent its inertia loading and elastic behavior from its mounting bolts to its drive coupling. Described here is how the rotor and stator of such a motor can be adequately modeled as a colinear pair of beams
Modeling of connections between substructures
It is demonstrated here that complete checkout of a basic substructure can be done under the special circumstance of a sliding connection with offsets. Stiff bar connectors make this possible so long as the bar coordinates are aligned with the displacement coordinates at the sliding surface
Obtaining an equivalent beam
In modeling a complex structure the researcher was faced with a component that would have logical appeal if it were modeled as a beam. The structure was a mast of a robot controlled gantry crane. The structure up to this point already had a large number of degrees of freedom, so the idea of conserving grid points by modeling the mast as a beam was attractive. The researcher decided to make a separate problem of of the mast and model it in three dimensions with plates, then extract the equivalent beam properties by setting up the loading to simulate beam-like deformation and constraints. The results could then be used to represent the mast as a beam in the full model. A comparison was made of properties derived from models of different constraints versus manual calculations. The researcher shows that the three-dimensional model is ineffective in trying to conform to the requirements of an equivalent beam representation. If a full 3-D plate model were used in the complete representation of the crane structure, good results would be obtained. Since the attempt is to economize on the size of the model, a better way to achieve the same results is to use substructuring and condense the mast to equivalent end boundary and intermediate mass points
Toward an Organizational Theory of Membership Structural Design
Various events have led to the development of highly complex cooperative operations and to concepts for understanding operations. However. development of membership structures and concepts for understanding these structures has lagged. This paper imports organizational design and contingency theory into the member control literature. Membership structure is understood as organization-like, producing a service (Le., member control). Member control structure is understood as having three aspects (representation, policy making, and oversight) and two environments (the members themselves, and management and operations). Building from cooperative principles and following the development of cooperatives from simple to complex organizations, this paper develops a series of axiomatic propositions for understanding and designing membership structure. Only some of the propositions are testable, and still others are meant only to give continuity and relevance to the propositions as a group (as a theory). Such work should help develop a language for understanding and furthering discussion and research of membership structure and member control in agricultural cooperatives.Agribusiness,
Charting from within a Grounded Concept of Member Control
Organizational charts of membership structures can be useful tools for monitoring member control when they accurately depict a concept of control grounded in context and theory. This paper develops the concept "member control" by placing it within cooperative principles and democratic theory. From this perspective, members control their organization when, through a democratic process of decision making, they are able to keep the cooperative a cooperative, a condition we call "containment." With this conceptual development, a containment method of member control charting is developed and illustrative examples given.Agribusiness,
Monitoring of Ritz modal generation
A scheme is proposed to monitor the adequacy of a set of Ritz modes to represent a solution by comparing the quantity generated with certain properties involving the forcing function. In so doing an attempt was made to keep this algorithm lean and efficient, so that it will be economical to apply. Using this monitoring scheme during Ritz Mode generation will automatically ensure that the k Ritz modes theta k that are generated are adequate to represent both the spatial and temporal behavior of the structure when forced under the given transient condition defined by F(s,t)
Experiences running NASTRAN on the Microvax 2 computer
The MicroVAX operates NASTRAN so well that the only detectable difference in its operation compared to an 11/780 VAX is in the execution time. On the modest installation described here, the engineer has all of the tools he needs to do an excellent job of analysis. System configuration decisions, system sizing, preparation of the system disk, definition of user quotas, installation, monitoring of system errors, and operation policies are discussed
- …