The role of information technology in STEM education

The ubiquity of IT (Information technology) for teaching at large is a reality that can be observed, including STEM education, which is the field of study of this research. In view of this situation, this work is intended to determine the role of IT in STEM (Science, Technology, Engineering, Mathematics) education. It was decided to conduct a systematic review based on PRISMA model and adding information obtained from the analysis of fugitive literature. The literature review was carried out on a total of 16 articles. The main inclusion criteria were a temporal selection from 2015 to March 2023, the inclusion of the terms IT and STEM in the title, abstract or keywords of the articles. The main results show an increasing tendency of this topic, especially in English research. Most relevant conclusions of the systematic review evidence a positive relationship between IT and STEM education, although some negative aspects are also highlighted as there is still a lack of resources and teacher training, leading to ineffective application of IT in STEM classes. The research results have important practical implications, it motivates teachers to research, propose and implement measures to enhance the role of IT in STEM education, while minimizing the limitations that have been identified

Mechanics and mechanism of puncture of protective materials

Puncture resistance is among the major mechanical properties often required for protective clothing, especially in the medical sector. However the intrinsic material parameters controlling puncture resistance of protective materials are still unknown. Therefore, the purpose of this work is to study the mechanism and mechanical behaviors of puncture resistance of protective clothing materials to various probe types. A better understanding of puncture mechanics will be helpful to develop suitable methods to evaluate the puncture resistance and to predict the failure of protective clothing materials. The thesis includes 4 articles which expose two major phases in this study. Article I and II studied the mechanics and mechanisms of puncture by conical and cylindrical probes used in the standard test methods (ASTM F1342 and ISO 13996). The results show that the punctures of rubber membranes by conical and cylindrical probes are controlled by a maximum local deformation (or puncture failure strain) that is independent of the probe geometry. The puncture strengths of elastomer membranes are much lower than their tensile and biaxial strengths. In addition, a simpler cylindrical probe can be used in the place of the costly conical probe required by the ASTM standard and still provides a quantitative characterization of puncture. Actually, since 2005, an alternative method B had been added to F1342 ASTM with 0.5 mm-diameter rounded-tip cylindrical probe. Furthermore, the puncture probes used in the ASTM F1342 are very different to the actual pointed objects (medical needle, pointed tip of knife... ) and cannot accurately characterize the puncture resistance to real objects. Therefore, in the second step, the mechanics and mechanisms of puncture by medical needles were studied. Article III shows that the puncture by sharp-pointed objects like medical needles is very different from the puncture by conical probes used in the ASTM standard test. For medical needles, the puncture resistance involves cutting and fracture energy of material. Using the fracture mechanics, based on the change in strain energy with the change in fracture surface, the fracture energy in puncture was estimated. This calculation assumes that there is no friction between the needle tip and fracture surface. However, even with the application of a lubricant on the needle surface, the effect of friction on the puncture process cannot be totally eliminated, preventing the determination of the material fracture energy. Therefore, Article IV has described a method, similar to that of Lake and Yeoh for cutting to access the precise value of fracture energy in puncture of rubbers by sharp-pointed objects. The method allows substantially eliminating the effects of friction on the evaluation of the fracture energy involved in the puncture process

OPERATING SYSTEM FOR WIRELESS SENSOR NETWORKS AND AN EXPERIMENT OF PORTING CONTIKIOS TO MSP430 MICROCONTROLLER

Wireless Sensor Networks (WSNs) consist of a large number of sensor nodes, and are used for various applications such as building monitoring, environment control, wild-life habitat monitoring, forest fire detection, industry automation, military, security, and health-care. Each sensor node needs an operating system (OS) that can control the hardware, provide hardware abstraction to application software, and fill in the gap between applications and the underlying hardware. In this paper, researchers present OS for WSNs and an experiment of porting contikiOS to MSP430 microcontroller which is very popular in many hardware platforms for WSNs. Researchers begin by presenting the major issues for the design of OS for WSNs. Then, researchers examine some popular operating systems for WSNs including TinyOS, ContikiOS, and LiteOS. Finally, researchers present an experiment of porting ContikiOS to MSP430 microcontroller. Wireless Sensor Networks (WSNs) terdiri dari sejumlah besar sensor nodes, dan digunakan untuk berbagai aplikasi seperti pemantauan gedung, pengendalian lingkungan, pemantauan kehidupan habitat liar, deteksi kebakaran hutan, otomatisasi industri, militer, keamanan, dan kesehatan. Setiap sensor nodememerlukan sistem operasi (SO) yang dapat mengontrol hardware, menyediakan abstraksi hardware untuk aplikasi perangkat lunak, dan mengisi kesenjangan antara aplikasi dan hardware. Dalam penelitian ini, peneliti menyajikan SO untuk WSNs dan percobaan dari port contikiOS untuk MSP430 mikrokontroler yang sangat populer di platformhardware untuk WSNs. Peneliti memulai dengan menghadirkan isu utama yaitu desain SO untuk WSNs. Lalu, penelitimemeriksa beberapa sistem operasi populer untuk WSNs, termasuk TinyOS, ContikiOS, dan LiteOS. Akhirnya penelitimenyajikan sebuah percobaan dari port ContikiOS untuk MSP430 mikrokontroler

Reclamation of Marine Chitinous Materials for Chitosanase Production via Microbial Conversion by Paenibacillus macerans

[[abstract]]: Chitinous materials from marine byproducts elicit great interest among biotechnologists for their potential biomedical or agricultural applications. In this study, four kinds of marine chitinous materials (squid pens, shrimp heads, demineralized shrimp shells, and demineralized crab shells) were used to screen the best source for producing chitosanase by Paenibacillus macerans TKU029. Among them, the chitosanase activity was found to be highest in the culture using the medium containing squid pens as the sole carbon/nitrogen (C/N) source. A chitosanase which showed molecular weights at 63 kDa was isolated from P. macerans cultured on a squid pens medium. The purified TKU029 chitosanase exhibited optimum activity at 60 ◦C and pH 7, and was stable at temperatures under 50 ◦C and pH 3-8. An analysis by MALDI-TOF MS revealed that the chitosan oligosaccharides (COS) obtained from the hydrolysis of water-soluble chitosan by TKU029 crude enzyme showed various degrees of polymerization (DP), varying from 3–6. The obtained COS enhanced the growth of four lactic acid bacteria strains but exhibited no effect on the growth of E. coli. By specialized growth enhancing effects, the COS produced from hydrolyzing water soluble chitosan with TKU029 chitinolytic enzymes could have potential for use in medicine or nutraceuticals.[[sponsorship]]MOST[[notice]]補正完

Fatigue performance of tubular X-joints: Numerical investigation

The cyclic actions due to waves, currents and winds on offshore platforms frequently cause fatigue cracks at hot-spot locations. The remaining fatigue life of such connections depends significantly on the fatigue driving force often measured by the stress-intensity factors. This study examines the fatigue performance of tubular joints fabricated using a new type of enhanced partial joint penetration weld details under constant-amplitude brace in-plane bending actions. The numerical study ascertains the crack propagation angle, the crack-front profile and the interaction between adjacent cracks on the stress-intensity factors

The effect of polyamine 70000 (BT70) on the zinc plating process in the non-cyanide alkaline plating bath

The effect of polyamine having molecular weight 70,000u (BT70) in the non-cyanide alkaline plating bath on the morphological zinc electrodeposited coating was investigated. The obtained results from the reflectance of electrodeposited zinc coating by a suitable range of electro-current density and SEM images showed that BT70 had effect on the zinc plating in comparison with the zinc deposits from plating bath without BT70. The electrodeposited coating surface was rough and poor adhesion. However, adding BT70 into the plating bath led to the surface roughness of electrodeposited coating and grand size being reduced. Zinc electrodeposited coating from a plating bath containing BT70 at 0.5 g/L, respectively, experienced the highest reflectance, equal 46 % of the electrodeposited coating from the bath containing commercial additives. Hull method showed that the zinc deposited coating surface became smoother with the presence of polyamine in non-cyanide alkaline zinc plating solution. The zinc deposited coating had a semi-gloss scope at 10 A/dm2. If the BT70 content increased, the semi-gloss scop and the gloss of samples’ surfaces also grew up. Keywords. Polyamine, additive, non-cyanide alkaline zinc plating, zinc coating

Enhancing insecticide activity of anacardic acid by intercalating it into MgAl layered double hydroxides nanoparticles: Research article

MgAl layered double hydroxides nanoparticles (LDHs) are known as the useful materials in agrochemsitry. LDHs can be used as a bio-insecticide carrier to enhance insecticide’s activity efficiency. In our study, to improve the insecticide activity of anacardic acid, an extract from cashew nut shell liquid, we intercalated it MgAl layered double hydroxides nanoparticles. Different hybridization between anacardic acid and LDHs (37, 74, 148, and 296μg/mL) (L-As) were made and tested on the survivals of cutworms (Spodoptera litura). L-As or free anacardic acid was sprayed directly on the leaves mustard to feed cutworms or directly on the skin of cutworms. Our results showed that in all L-As treatments, the worm killing efficiency was higher than the free anacardic acid treatment.Hạt nano lớp đôi hydroxides MgAl (LDHs) được biết đến như là những vật liệu hữu ích trong nông ngành hóa học nông nghiệp. LDHs có thể được dùng như là một loại chất mang cho thuốc trừ sâu sinh học để tăng cường hiệu lực diệt sâu. Trong nghiên cứu này, để tăng cường hiệu lực diệt sâu của anacardic acid, một loại hoạt chất được chiết từ dầu vỏ hạt điều, chúng tôi đã gắn chèn nó lên hạt nano lớp đôi hydroxides MgAl. Các nồng độ khác nhau của dạng lai của anacardic và LDHs (37, 74, 148 và 296μg/mL) (L-As) đã được kiểm tra tỷ lệ sống của ấu trùng sâu khoang (Spodoptera litura). Các nghiệm thức L-As và dạng anacardic acid tự do đã được phun lên lá rau cải ngọt cho ấu trùng sâu ăn hoặc phun trực tiếp lên da ấu trùng sâu. Kết quả cho thấy, tất cả các công thức có xử lý bằng L-As, hiệu lực diệt ấu trùng sâu đều cao hơn so với dạng anacardic acid ở trạng thái tự do

The results of deep magnetotelluric sounding for studying the Nha Trang - Tanh Linh fault

The profile of deep magnetotelluric sounding (MT) from Duc Trong - Tuy Phong has been carried out in Lam Dong and Binh Thuan  provinces. The length of the Duc Trong - Tuy Phong profile is about 80 km with 15 stations and the distance between the stations measures about 5 km. Two-dimensional MT inversion was used to find a resistivity model that fits the data. The 2D resistivity model allows determining position and development formation of the Nha Trang - Tanh Linh  fault. This is the deep fault, which is showed by the boundaries of remarkable change of resistivity. In the near surface of the Earth (from ground to the depth of 6 km), the angle of inclination of this fault is about 60o; in the next part, the direction of the Nha Trang - Tanh Linh  faut is vertical. Geoelectrical section of the Nha Trang - Tanh Linh  profile shows that the resistivity of mid-crust is higher than that of lower-crust and of upper-crust

Crystal structure of <i>N</i>-(4-oxo-2-sulfanyl-idene-1,3-thia-zolidin-3-yl)-2-(thio-phen-3-yl)acetamide.

The title compound, C9H8N2O2S3, crystallizes with two mol-ecules (A and B) in the asymmetric unit. Both have similar conformations (overlay r.m.s. deviation = 0.209 Å) and are linked by an N-H⋯O hydrogen bond. In both mol-ecules, the thio-phene rings show orientational disorder, with occupancy factors of 0.6727 (17) and 0.3273 (17) for mol-ecule A, and 0.7916 (19) and 0.2084 (19) for mol-ecule B. The five-membered rings make an angle of 79.7 (2)° in mol-ecule A and an angle of 66.8 (2)° in mol-ecule B. In the crystal, chains of mol-ecules running along the a-axis direction are linked by N-H⋯O hydrogen bonds. The inter-action of adjacent chains through N-H⋯O hydrogen bonds leads to two types of ring structures containing four mol-ecules and described by the graph-set motifs R44(18) and R42(14)

Bioactivity-guided purification of novel herbal antioxidant and anti-NO compounds from Euonymus laxiflorus Champ

[[abstract]]Euonymus laxiflorus Champ., a medicinal herb collected in Vietnam, has been reported to show several potent bioactivities, including anti-NO, enzyme inhibition, hypoglycemic and antidiabetic effects. Recently, the antioxidant activity of Euonymus laxiflorus Champ. trunk bark (ELCTB) has also been reported. However, the active antioxidant and anti-NO constituents existing in ELCTB have not been reported in the literature. The objective of this study was to purify the active antioxidants from ELCTB and investigate the anti-NO effect of the major constituents. Twenty-two phenolics isolated from ELCTB, including 12 compounds newly isolated in this study (1–12) and 10 constituents obtained from our previous work, were evaluated for their antioxidant activity. Of these, 12 compounds (4–6, 9, 13–15, 18–22) showed a potent antioxidant capacity (FRS50 = 7.8–58.11 µg/mL), in comparison to α-tocopherol (FRS50 = 23 µg/mL). In the anti-NO activity tests, Walterolactone A (1a) and B (1b) β-D-glucopyranoside (13) demonstrated the most effective and comparable activity to that of quercetin with max inhibition and IC50 values of 100%, 1.3 µg/mL, and 100%, 1.21 µg/mL, respectively. The crude extract and its major compounds showed no cytotoxicity on normal cells. Notably, three constituents (9, 11, and 12) were identified as new compounds, another three constituents, including 1, 7, and 8, were found to be new natural products, constituents 9 and 13 were determined to be new antioxidants, and compound 13 was reported to have novel potent anti-NO activity for the first time. The results of this study contribute to the enrichment of new natural products and compounds, as well as the novel biological activity of constituents isolated from Euonymus laxiflorus Champ. The current study also indicates ELCTB as a rich natural source of active phenolics. It is suggested that ELCTB could be developed as a health food with promising antioxidant and anti-NO effects, as well as other beneficial biological activities.[[sponsorship]]科技部[[notice]]補正完