Inducing an optical Feshbach resonance via stimulated Raman coupling

We demonstrate a novel method of inducing an optical Feshbach resonance based on a coherent free-bound stimulated Raman transition. In our experiment atoms in a Rb87 Bose-Einstein condensate are exposed to two phase-locked Raman laser beams which couple pairs of colliding atoms to a molecular ground state. By controlling the power and relative detuning of the two laser beams, we can change the atomic scattering length considerably. The dependence of scattering length on these parameters is studied experimentally and modelled theoretically.Comment: 8 pages, 8 figures, submitted to PR

Long Distance Transport of Ultracold Atoms using a 1D optical lattice

We study the horizontal transport of ultracold atoms over macroscopic distances of up to 20 cm with a moving 1D optical lattice. By using an optical Bessel beam to form the optical lattice, we can achieve nearly homogeneous trapping conditions over the full transport length, which is crucial in order to hold the atoms against gravity for such a wide range. Fast transport velocities of up to 6 m/s (corresponding to about 1100 photon recoils) and accelerations of up to 2600 m/s2 are reached. Even at high velocities the momentum of the atoms is precisely defined with an uncertainty of less than one photon recoil. This allows for construction of an atom catapult with high kinetic energy resolution, which might have applications in novel collision experiments.Comment: 15 pages, 8 figure

Position clamping in a holographic counterpropagating optical trap

Optical traps consisting of two counterpropagating, divergent beams of light allow relatively high forces to be exerted along the optical axis by turning off one beam, however the axial stiffness of the trap is generally low due to the lower numerical apertures typically used. Using a high speed spatial light modulator and CMOS camera, we demonstrate 3D servocontrol of a trapped particle, increasing the stiffness from 0.004 to 1.5μNm<sup>−1</sup>. This is achieved in the “macro-tweezers” geometry [Thalhammer, J. Opt. 13, 044024 (2011); Pitzek, Opt. Express 17, 19414 (2009)], which has a much larger field of view and working distance than single-beam tweezers due to its lower numerical aperture requirements. Using a 10×, 0.2NA objective, active feedback produces a trap with similar effective stiffness to a conventional single-beam gradient trap, of order 1μNm<sup>−1</sup> in 3D. Our control loop has a round-trip latency of 10ms, leading to a resonance at 20Hz. This is sufficient bandwidth to reduce the position fluctuations of a 10μm bead due to Brownian motion by two orders of magnitude. This approach can be trivially extended to multiple particles, and we show three simultaneously position-clamped beads

Acoustic force mapping in a hybrid acousticoptical micromanipulation device supporting high resolution optical imaging

Many applications in the life-sciences demand non-contact manipulation tools for forceful but nevertheless delicate handling of various types of sample. Moreover, the system should support high-resolution optical imaging. Here we present a hybrid acoustic/optical manipulation system which utilizes a transparent transducer, making it compatible with high-NA imaging in a microfluidic environment. The powerful acoustic trapping within a layered resonator, which is suitable for highly parallel particle handling, is complemented by the flexibility and selectivity of holographic optical tweezers, with the specimens being under high quality optical monitoring at all times. The dual acoustic/optical nature of the system lends itself to optically measure the exact acoustic force map, by means of direct force measurements on an optically trapped particle. For applications with (ultra-)high demand on the precision of the force measurements, the position of the objective used for the high-NA imaging may have significant influence on the acoustic force map in the probe chamber. We have characterized this influence experimentally and the findings were confirmed by model simulations. We show that it is possible to design the chamber and to choose the operating point in such a way as to avoid perturbations due to the objective lens. Moreover, we found that measuring the electrical impedance of the transducer provides an easy indicator for the acoustic resonances

Generally applicable holographic torque measurement for optically trapped particles

We present a method to measure the optical torque applied to particles of arbitrary shape such as micrometer-sized micro-organisms or cells held in an optical trap, inferred from the change of angular momentum of light induced by the particle. All torque components can be determined from a single interference pattern recorded by a camera in the back focal plane of a high-NA condenser lens provided that most of the scattered light is collected. We derive explicit expressions mapping the measured complex field in this plane to the torque components. The required phase is retrieved by an iterative algorithm, using the known position of the optical traps as constraints. The torque pertaining to individual particles is accessible, as well as separate spin or orbital parts of the total torque

Roadmap for Optical Tweezers 2023

Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force and torque measurement at the femtonewton level, microrheology of complex fluids, single micro- and nanoparticle spectroscopy, single-cell analysis, and statistical-physics experiments. This roadmap provides insights into current investigations involving optical forces and optical tweezers from their theoretical foundations to designs and setups. It also offers perspectives for applications to a wide range of research fields, from biophysics to space exploration

PyVISA: The Python instrumentation package

Data-driven science requires reliable data generation, and in modern instrumentation software plays a central role to achieve this goal. Computer-controlled experiments allow for complex synchronization of sensors and actuators. Moreover, as it was already recognized decades ago, they enable on-line analysis routines to steer the experiment in real time (Enke, 1982). When combined with programming best practices, instrumentation software fosters reproducible, traceable, and open science. An important step in the development of instrumentation software has been the definition of Virtual Instrument Software Architecture (VISA) (Cheij, 2002), which quickly became the most common API for test and measurement and is widely used both in industry and academia. It includes specifications for communication with resources over a variety of interfaces such as GPIB, PXI, VXI, SERIAL, TCP/IP, and USB. VISA abstracts away the (often complex) idiosyncrasies of those low-level protocols, so that the scientist can focus on the instrument-specific command set. The Python package PyVISA provides an easy-to-use interface to software libraries that implement the VISA standard, enabling communication between a host computer and instruments or other devices.Fil: Grecco, Hernan Edgardo. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Física; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; ArgentinaFil: Dartiailh, Matthieu C.. Ecole Normale Supérieure; Francia. University of New York; Estados Unidos. Institut Néel; FranciaFil: Thalhammer Thurner, Gregor. Universidad de Innsbruck; AustriaFil: Bronger, Torsten. Helmholtz Gemeinschaft. Forschungszentrum Jülich; AlemaniaFil: Bauer, Florian. No especifíca

Speeding up liquid crystal SLMs using overdrive with phase change reduction

Nematic liquid crystal spatial light modulators (SLMs) with fast switching times and high diffraction efficiency are important to various applications ranging from optical beam steering and adaptive optics to optical tweezers. Here we demonstrate the great benefits that can be derived in terms of speed enhancement without loss of diffraction efficiency from two mutually compatible approaches. The first technique involves the idea of overdrive, that is the calculation of intermediate patterns to speed up the transition to the target phase pattern. The second concerns optimization of the target pattern to reduce the required phase change applied to each pixel, which in addition leads to a substantial reduction of variations in the intensity of the diffracted light during the transition. When these methods are applied together, we observe transition times for the diffracted light fields of about 1 ms, which represents up to a tenfold improvement over current approaches. We experimentally demonstrate the improvements of the approach for applications such as holographic image projection, beam steering and switching, and real-time control loops