615 research outputs found
Comment on "Fano Resonance for Anderson Impurity Systems"
In a recent Letter, Luo et al. (Phys. Rev. Lett. 92, 256602 (2004)) analyze
the Fano line shapes obtained from scanning tunneling spectroscopy (STS) of
transition metal impurities on a simple metal surface, in particular of the
Ti/Au(111) and Ti/Ag(100) systems. As the key point of their analysis, they
claim that there is not only a Fano interference effect between the impurity
d-orbital and the conduction electron continuum, as derived in Ujsaghy et al.
(Phys. Rev. Lett. 85, 2557 (2000)), but that the Kondo resonance in the
d-electron spectral density has by itself a second Fano line shape, leading to
the experimentally observed spectra. In the present note we point out that this
analysis is conceptually incorrect. Therefore, the quantitative agreement of
the fitted theoretical spectra with the experimental results is meaningless.Comment: 1 page, no figures. Accepted for publication in PRL; revised version
uploaded on November 18th, 200
Status of neutrino oscillations 2018: first hint for normal mass ordering and improved CP sensitivity
We present a new global fit of neutrino oscillation parameters within the
simplest three-neutrino picture, including new data which appeared since our
previous analysis~\cite{Forero:2014bxa}. In this update we include new
long-baseline neutrino data involving the antineutrino channel in T2K, as well
as new data in the neutrino channel, data from NOA, as well as new reactor
data, such as the Daya Bay 1230 days electron antineutrino disappearance
spectrum data and the 1500 live days prompt spectrum from RENO, as well as new
Double Chooz data. We also include atmospheric neutrino data from the IceCube
DeepCore and ANTARES neutrino telescopes and from Super-Kamiokande. Finally, we
also update our solar oscillation analysis by including the 2055-day day/night
spectrum from the fourth phase of the Super-Kamiokande experiment. With the new
data we find a preference for the atmospheric angle in the upper octant for
both neutrino mass orderings, with maximal mixing allowed at for normal (inverted) ordering. We also obtain a strong
preference for values of the CP phase in the range ,
excluding values close to at more than 4. More remarkably, our
global analysis shows for the first time hints in favour of the normal mass
ordering over the inverted one at more than 3. We discuss in detail the
origin of the mass ordering, CP violation and octant sensitivities, analyzing
the interplay among the different neutrino data samples.Comment: Updated neutrino oscillation analysis using the most recent results
from T2K, NOA, RENO and Super-Kamiokande. 17 pages, 8 figures, 1 tabl
Controlling Thin Film Morphology Formation during Gas Quenching of Slot-Die Coated Perovskite Solar Modules
Transferring record power conversion efficiency (PCE) >25 % of spin-coated perovskite solar cells (PSCs) from the laboratory scale to large-area photovoltaic modules requires significant advance in scalable fabrication techniques. In this work, we demonstrate the fundamental interrelation between drying dynamics of slot-die coated precursor solution thin films and the quality of slot-die coated gas quenched polycrystalline perovskite thin films. Well defined drying conditions are established using a temperature-stabilized, movable table and a flow-controlled, oblique impinging slot nozzle purged with nitrogen. The accurately deposited solution thin film on the substrate is recorded by a tilted CCD camera, allowing for in situ monitoring of the perovskite thin film formation. With the tracking of crystallization dynamics during the drying process, we identify critical process parameters needed for the design of optimal drying and gas quenching systems. In addition, defining different drying regimes, we derive practical slot jet adjustments preventing gas backflow and demonstrate large-area, homogeneous and pinhole-free slot-die coated perovskite thin films that result in solar cells with PCEs of up to 18.6 %. Our study reveals key interrelations of process parameters, e.g. the gas flow and drying velocity, and the exact crystallization position with the morphology formation of fabricated thin films, resulting in a homogeneous performance of corresponding solar 50x50 mm2 mini-modules (17.2 %) with only minimal upscaling loss. In addition, we validate a previously developed model on the drying dynamics of perovskite thin films on small-area for slot-die coated areas of ≥100 cm2. The study provides methodical guidelines for the design of future slot-die coating setups and establishes a step forward to a successful transfer of industrial-scale deposition systems beyond brute force optimization
Creating pseudo Kondo-resonances by field-induced diffusion of atomic hydrogen
In low temperature scanning tunneling microscopy (STM) experiments a cerium
adatom on Ag(100) possesses two discrete states with significantly different
apparent heights. These atomic switches also exhibit a Kondo-like feature in
spectroscopy experiments. By extensive theoretical simulations we find that
this behavior is due to diffusion of hydrogen from the surface onto the Ce
adatom in the presence of the STM tip field. The cerium adatom possesses
vibrational modes of very low energy (3-4meV) and very high efficiency (> 20%),
which are due to the large changes of Ce-states in the presence of hydrogen.
The atomic vibrations lead to a Kondo-like feature at very low bias voltages.
We predict that the same low-frequency/high-efficiency modes can also be
observed at lanthanum adatoms.Comment: five pages and four figure
Recommended from our members
The Oklahoma Field Test: Air-conditioning electricity savings from standard energy conservation measures, radiant barriers, and high-efficiency window air conditioners
A field test Involving 104 houses was performed in Tulsa, Oklahoma, to measure the air-conditioning electricity consumption of low-income houses equipped with window air conditioners, the reduction in this electricity consumption attributed to the installation of energy conservation measures (ECMS) as typically installed under the Oklahoma Weatherization Assistance Program (WAP), and the reduction achieved by the replacement of low-efficiency window air conditioners with high-efficiency units and the installation of attic radiant barriers. Air-conditioning electricity consumption and indoor temperature were monitored weekly during the pre-weatherization period (June to September 1988) and post-weatherization period (May to September 1989). House energy consumption models and regression analyses were used to normalize the air-conditioning electricity savings to average outdoor temperature conditions and the pre-weatherization indoor temperature of each house. The following conclusions were drawn from the study: (1) programs directed at reducing air-conditioning electricity consumption should be targeted at clients with high consumption to improve cost effectiveness; (2) replacing low-efficiency air conditioners with high-efficiency units should be considered an option in a weatherization program directed at reducing air-conditioning electricity consumption; (3) ECMs currently being installed under the Oklahoma WAP (chosen based on effectiveness at reducing space-heating energy consumption) should continue to be justified based on their space-heating energy savings potential only; and (4) attic radiant barriers should not be included in the Oklahoma WAP if alternatives with verified savings are available or until further testing demonstrates energy savings or other benefits in this typo of housing
Recommended from our members
Energy efficiency in military housing: Monitoring to support revitalization guidebook
Oak Ridge National Laboratory is working with the US Army, the US Air Force, and the US Department of Energy to develop a guidebook to be used by architectural and engineering firms in the design phases of military family housing revitalization projects. The purpose of the guidebook is to ensure that energy efficiency is properly addressed in revitalization projects. Monitoring space-heating and cooling energy used in houses both before and after they are revitalized is necessary in order to assess the amount of energy saved by the revitalization process. Three different methods of conducting monitoring experiments are discussed, as well as the methods of data analysis to be used. Houses will be monitored individually using standard gas and electric meters to obtain heating and cooling data for the houses. The authors recommend conducting monitoring programs at Altus Air Force Base, Oklahoma, and Fort Monmouth, New Jersey, because of their project schedules and potential for savings. They do not recommend doing any monitoring at Malmstrom Air Force Base, Montana, because of the relatively small savings that they expect revitalization to accomplish there. They do not recommend seeking out alternative sites for monitoring because of the time required to become familiar with the installation and also because revitalization schedules at alternative sites may be no better than those at the sites they inspected
Correlative In Situ Multichannel Imaging for Large-Area Monitoring of Morphology Formation in Solution-Processed Perovskite Layers
To scale up production of perovskite photovoltaics, state-of-the-art laboratory recipes and processes must be transferred to large-area coating and drying systems. The development of in situ monitoring methods that provide real-time feedback for process control is pivotal to overcome this challenge. Herein, correlative in situ multichannel imaging (IMI) obtaining reflectance, photoluminescence intensity, and central photoluminescence emission wavelength images on areas larger than 100 cm2 with subsecond temporal resolution using a simple, cost-effective setup is demonstrated. Installed on top of a drying channel with controllable laminar air flow and substrate temperature, IMI is shown to consistently monitor solution film drying, perovskite nucleation, and perovskite crystallization. If the processing parameters differ, IMI reveals characteristic changes in large-area perovskite formation dynamics already before the final annealing step. Moreover, when IMI is used to study >130 blade-coated devices processed at the same parameters, about 90% of low-performing devices contain coating inhomogeneities detected by IMI. The results demonstrate that IMI should be of value for real-time 2D monitoring and feedback control in industrial-scale, high-throughput fabrication such as roll-to-roll printing
Fate of conjugated natural and synthetic steroid estrogens in crude sewage and activated sludge batch studies
This document is the unedited author's version of a Submitted Work that was subsequently accepted for publication in Environmental Science & Technology, copyright © American Chemical Society after peer review. To access the final edited and published work see http://pubs.acs.org/doi/abs/10.1021/es801952h.Steroids are excreted from the human body in the conjugated form but are present in sewage influent and effluent as the free steroid, the major source of estrogenic activity observed in water courses. The fate of sulfate and glucuronide conjugated steroid estrogens was investigated in batch studies using activated sludge grown on synthetic sewage in a laboratory-scale Husmann simulation and crude sewage from the field. A clear distinction between the fate of sulfate and glucuronide conjugates was observed in both matrices, with sulfated conjugates proving more recalcitrant and glucuronide deconjugation preferential in crude sewage. For each conjugate, the free steroid was observed in the biotic samples. The degree of free steroid formation was dependent on the conjugate moiety, favoring the glucuronide. Subsequent degradation of the free steroid (and sorption to the activated sludge solid phase) was evaluated. Deconjugation followed the first order reaction rate with rate constants for 17α-ethinylestradiol 3-glucuronide, estriol 16α-glucuronide, and estrone 3-glucuronide determined as 0.32, 0.24, and 0.35 h respectively. The activated sludge solid retention time over the range of 3−9 days had 74 to 94% of sulfate conjugates remaining after 8 h. In contrast, a correlation between increasing temperature and decreasing 17α-ethinylestradiol 3-glucuronide concentrations in the activated sludge observed no conjugate present in the AS following 8 h at 22 °C Based on these batch studies and literature excretion profiles, a hypothesis is presented on which steroids and what form (glucuronide, sulfate, or free) will likely enter the sewage treatment plant.EPSR
Influence of operating parameters on the biodegradation of steroid estrogens and nonylphenolic compounds during biological wastewater treatment processes
This document is the unedited author's version of a Submitted Work that was subsequently accepted for
publication in Environmental Science & Technology, copyright © American Chemical Society after peer
review. To access the final edited and published work see http://pubs.acs.org/doi/abs/10.1021/es901612v.This study investigated operational factors influencing the removal of steroid estrogens and nonylphenolic compounds in two sewage treatment works, one a nitrifying/denitrifying activated sludge plant and the other a nitrifying/denitrifying activated sludge plant with phosphorus removal. Removal efficiencies of >90% for steroid estrogens and for longer chain nonylphenol ethoxylates (NP4−12EO) were observed at both works, which had equal sludge ages of 13 days. However, the biological activity in terms of milligrams of estrogen removed per day per tonne of biomass was found to be 50−60% more efficient in the nitrifying/denitrifying activated sludge works compared to the works which additionally incorporated phosphorus removal. A temperature reduction of 6 °C had no impact on the removal of free estrogens, but removal of the conjugated estrone-3-sulfate was reduced by 20%. The apparent biomass sorption (LogKp) values were greater in the nitrifying/denitrifying works than those in the nitrifying/denitrifying works with phosphorus removal for both steroid estrogens and nonylphenolic compounds possibly indicating a different cell surface structure and therefore microbial population. The difference in biological activity (mg tonne−1 d−1) identified in this study, of up to seven times, suggests that there is the potential for enhancing the removal of estrogens and nonylphenols if more detailed knowledge of the factors responsible for these differences can be identified and maximized, thus potentially improving the quality of receiving waters.Public Utilities Board (Singapore), Anglian Water Ltd, Severn Trent Water Ltd, Thames Water Utilities Ltd, United Utilities 393 Plc and Yorkshire Water Services
Upscaling of perovskite solar modules: The synergy of fully evaporated layer fabrication and all‐laser‐scribed interconnections
Given the outstanding progress in research over the past decade, perovskite photovoltaics (PV) is about to step up from laboratory prototypes to commercial products. For this to happen, realizing scalable processes to allow the technology to transition from solar cells to modules is pivotal. This work presents all-evaporated perovskite PV modules with all thin films coated by established vacuum deposition processes. A common 532-nm nanosecond laser source is employed to realize all three interconnection lines of the solar modules. The resulting module interconnections exhibit low series resistance and a small total lateral extension down to 160 μm. In comparison with interconnection fabrication approaches utilizing multiple scribing tools, the process complexity is reduced while the obtained geometrical fill factor of 96% is comparable with established inorganic thin-film PV technologies. The all-evaporated perovskite minimodules demonstrate power conversion efficiencies of 18.0% and 16.6% on aperture areas of 4 and 51 cm, respectively. Most importantly, the all-evaporated minimodules exhibit only minimal upscaling losses as low as 3.1% per decade of upscaled area, at the same time being the most efficient perovskite PV minimodules based on an all-evaporated layer stack sequence
- …