9 research outputs found
Effects of sublethal single, simultaneous and sequential abiotic stresses on phenotypic traits of Arabidopsis thaliana
Plant responses to abiotic stresses are complex and dynamic, and involve changes in different traits, either as the direct consequence of the stress, or as an active acclimatory response. Abiotic stresses frequently occur simultaneously or in succession, rather than in isolation. Despite this, most studies have focused on a single stress and single or few plant traits. To address this gap, our study comprehensively and categorically quantified the individual and combined effects of three major abiotic stresses associated with climate change (flooding, progressive drought and high temperature) on 12 phenotypic traits related to morphology, development, growth and fitness, at different developmental stages in four Arabidopsis thaliana accessions. Combined sublethal stresses were applied either simultaneously (high temperature and drought) or sequentially (flooding followed by drought). In total, we analysed the phenotypic responses of 1782 individuals across these stresses and different developmental stages. Overall, abiotic stresses and their combinations resulted in distinct patterns of effects across the traits analysed, with both quantitative and qualitative differences across accessions. Stress combinations had additive effects on some traits, whereas clear positive and negative interactions were observed for other traits: 9 out of 12 traits for high temperature and drought, 6 out of 12 traits for post-submergence and drought showed significant interactions. In many cases where the stresses interacted, the strength of interactions varied across accessions. Hence, our results indicated a general pattern of response in most phenotypic traits to the different stresses and stress combinations, but it also indicated a natural genetic variation in the strength of these responses. This includes novel results regarding the lack of a response to drought after submergence and a decoupling between leaf number and flowering time after submergence. Overall, our study provides a rich characterization of trait responses of Arabidopsis plants to sublethal abiotic stresses at the phenotypic level and can serve as starting point for further in-depth physiological research and plant modelling efforts
Forced apart : a microtubule-based mechanism for equidistant positioning of multiple nuclei in single cells
Cells can position multiple copies of components like carboxysomes, nucleoids, and nuclei at regular intervals. By controlling positions, cells, for example, ensure equal partitioning of organelles over daughter cells and, in the case of nuclei, control cell sizes during cellularization. Mechanisms that generate regular patterns are as yet poorly understood. We used fission yeast cell cycle mutants to investigate the dispersion of multiple nuclei by microtubule-generated forces in single cells. After removing internuclear attractive forces by microtubule-based molecular motors, we observed the establishment of regular patterns of nuclei. Based on live-cell imaging, we hypothesized that microtubule growth within internuclear spaces pushes neighbouring nuclei apart. In the proposed mechanism, which was validated by stochastic simulations, the repulsive force weakens with increasing separation because stochastic shortening events limit the extent over which microtubules generate forces. Our results, therefore, demonstrate how cells can exploit the dynamics of microtubule growth for the equidistant positioning of organelles
DNA movement in sub-20 nm nanoslits
The movement of XbaI digested O-DNA in 20 nanometer and O-DNA in 12 nanometer high slits was investigated. We found that DNA moved intermittently and following preferential pathways, indicating an important influence of surface roughness. From these intermittent movements two different mobilities were calculated, the total averaged mobilities and averaged mobilities between the intermittent sticking events. The friction coefficient per unit length was calculated from the latter mobilities. A three order of magnitude increase was found for the 12 nm slits compared to the theoretical value. The mobility furthermore differs less than one order of magnitude between 20 nm and 12 nm slits, and the influence of varying the ionic strength of the buffer was not significant. This work is the first time DNA movement in such shallow constrictions is investigated
C. elegans Runx/CBFβ suppresses POP-1 TCF to convert asymmetric to proliferative division of stem cell-like seam cells
A correct balance between proliferative and asymmetric cell divisions underlies normal development, stem cell maintenance and tissue homeostasis. What determines whether cells undergo symmetric or asymmetric cell division is poorly understood. To gain insight into the mechanisms involved, we studied the stem cell-like seam cells in the Caenorhabditis elegans epidermis. Seam cells go through a reproducible pattern of asymmetric divisions, instructed by divergent canonical Wnt/β-catenin signaling, and symmetric divisions that increase the seam cell number. Using time-lapse fluorescence microscopy we observed that symmetric cell divisions maintain asymmetric localization of Wnt/β-catenin pathway components. Our observations, based on lineage-specific knockout and GFP-tagging of endogenous pop-1, support the model that POP-1TCF induces differentiation at a high nuclear level, whereas low nuclear POP-1 promotes seam cell self-renewal. Before symmetric division, the transcriptional regulator RNT-1Runx and cofactor BRO-1CBFβ temporarily bypass Wnt/β-catenin asymmetry by downregulating pop-1 expression. Thereby, RNT-1/BRO-1 appears to render POP-1 below the level required for its repressor function, which converts differentiation into self-renewal. Thus, we found that conserved Runx/ CBFβ-type stem cell regulators switch asymmetric to proliferative cell division by opposing TCF-related transcriptional repression
DNA movement in sub-20 nm nanoslits
The movement of XbaI digested -DNA in 20 nanomometer and .. -DNA in 12 nanometer high slits was investigated. We found that DNA moved intermittently and following preferential pathways, indicating an important influence of surface roughness. From these mobilities and averaged mobilities between the intermittent sticking events. The friction coefficient per unit length was calculated from the latter mobilities. A three order of magnitude increase was found for the 12 nm slits compared to the theoretical value. The mobility furthermore differs less than one order of magnitude between 20 nm and 12 nm slits, and the influence of varying the ionic strength of the buffer was not significant. This work is the first time DNA movement in such shallow constrictions is investigated
Field-Dependent DNA Mobility in 20nm High Nanoslits
The transport behavior of λ-DNA (48 kbp) in fused silica nanoslits is investigated upon application of electrical fields of different strengths. The slit dimensions are 20 nm in height, 3 µm in width, and 500 µm in length. With fields of 30 kV/m or below, the molecules move fluently through the slits, while at higher electrical fields, the DNA molecules move intermittently, resulting in a strongly reduced mobility. We propose that the behavior can be explained by mechanical and/or field-induced dielectrophoretic DNA trapping due to the surface roughness in the nanoslits. The observation of preferential pathways and trapping sites of the λ-DNA molecules through the nanoslits supports this hypothesis and indicates that the classical viscous friction models to explain the DNA movement in nanoslits needs to be modified to include these effects. Preliminary experiments with the smaller XbaI-digested litmus-DNA (2.8 kbp) show that the behavior is size-dependent, suggesting that the high field electrophoresis in nanoslits can be used for DNA separation
Schrödinger's capsule : a (micro) capsulate that is open and closed, almost, at the same time
We exploit different routes for encapsulation of food additives, such as minerals or vitamins, in a polymeric capsule. The added active ingredients should remain inside the capsule for at least a year in an aqueous environment (e.g. a dairy product), since sensory properties or functionality of the ingredients may otherwise be affected. However, after intake the active compound should readily (within 1 h) be released due to the acidic environment in the stomach. First, we propose a phenomenological model in order to study how a polymeric matrix may limit the diffusion of incorporated active molecules. The relation between the release rate of the active compound and its molecular weight is elucidated. Second, the desired capsules may be obtained by specific binding between subunits within the capsule and the active ingredient. We show two examples that rely on this mechanism: amylose-lipid complexes and mixed metal hydroxides. Amylose is able to form inclusion complexes with various types of ligands, including iodine, monoglycerides, fatty acids and alcohols, where the hydrophobic parts of the ligands are entrapped in the hydrophobic helical cavity of amylose. Mixed metal hydroxides are a versatile class of inorganic solids that consist of sheets of metal cations that are octahedrally surrounded by hydroxide molecules. In between these layers anionic species compensate for charge neutrality. In this way, various metal cations (minerals) may be incorporated with a high loading, and negatively charged actives may be placed between the layers. Upon digestion the particles dissolve and the ingredients are digested. Finally, we show that nature has already developed many intriguing capsules
Effects of sublethal single, simultaneous and sequential abiotic stresses on phenotypic traits of Arabidopsis thaliana
Plant responses to abiotic stresses are complex and dynamic, and involve changes in different traits, either as the direct consequence of the stress, or as an active acclimatory response. Abiotic stresses frequently occur simultaneously or in succession, rather than in isolation. Despite this, most studies have focused on a single stress and single or few plant traits. To address this gap, our study comprehensively and categorically quantified the individual and combined effects of three major abiotic stresses associated with climate change (flooding, progressive drought and high temperature) on 12 phenotypic traits related to morphology, development, growth and fitness, at different developmental stages in four Arabidopsis thaliana accessions. Combined sublethal stresses were applied either simultaneously (high temperature and drought) or sequentially (flooding followed by drought). In total, we analysed the phenotypic responses of 1782 individuals across these stresses and different developmental stages. Overall, abiotic stresses and their combinations resulted in distinct patterns of effects across the traits analysed, with both quantitative and qualitative differences across accessions. Stress combinations had additive effects on some traits, whereas clear positive and negative interactions were observed for other traits: 9 out of 12 traits for high temperature and drought, 6 out of 12 traits for post-submergence and drought showed significant interactions. In many cases where the stresses interacted, the strength of interactions varied across accessions. Hence, our results indicated a general pattern of response in most phenotypic traits to the different stresses and stress combinations, but it also indicated a natural genetic variation in the strength of these responses. This includes novel results regarding the lack of a response to drought after submergence and a decoupling between leaf number and flowering time after submergence. Overall, our study provides a rich characterization of trait responses of Arabidopsis plants to sublethal abiotic stresses at the phenotypic level and can serve as starting point for further in-depth physiological research and plant modelling efforts
Effects of sublethal single, simultaneous and sequential abiotic stresses on phenotypic traits of Arabidopsis thaliana
Plant responses to abiotic stresses are complex and dynamic, and involve changes in different traits, either as the direct consequence of the stress, or as an active acclimatory response. Abiotic stresses frequently occur simultaneously or in succession, rather than in isolation. Despite this, most studies have focused on a single stress and single or few plant traits. To address this gap, our study comprehensively and categorically quantified the individual and combined effects of three major abiotic stresses associated with climate change (flooding, progressive drought and high temperature) on 12 phenotypic traits related to morphology, development, growth and fitness, at different developmental stages in four Arabidopsis thaliana accessions. Combined sublethal stresses were applied either simultaneously (high temperature and drought) or sequentially (flooding followed by drought). In total, we analysed the phenotypic responses of 1782 individuals across these stresses and different developmental stages. Overall, abiotic stresses and their combinations resulted in distinct patterns of effects across the traits analysed, with both quantitative and qualitative differences across accessions. Stress combinations had additive effects on some traits, whereas clear positive and negative interactions were observed for other traits: 9 out of 12 traits for high temperature and drought, 6 out of 12 traits for post-submergence and drought showed significant interactions. In many cases where the stresses interacted, the strength of interactions varied across accessions. Hence, our results indicated a general pattern of response in most phenotypic traits to the different stresses and stress combinations, but it also indicated a natural genetic variation in the strength of these responses. This includes novel results regarding the lack of a response to drought after submergence and a decoupling between leaf number and flowering time after submergence. Overall, our study provides a rich characterization of trait responses of Arabidopsis plants to sublethal abiotic stresses at the phenotypic level and can serve as starting point for further in-depth physiological research and plant modelling efforts