96,966 research outputs found
Recommended from our members
Food writing and food cultures: the case of Elizabeth David and Jane Grigson
Analytical simulation of the Langley Research Center integrated life-support system, volume 1
Analytical simulation of integrated life support system and oxygen recovery syste
Methods of resistance estimation in permanent magnet synchronous motors for real-time thermal management
Real-time thermal management of electrical ma- chines relies on sufficiently accurate indicators of internal tem- perature. One indicator of temperature in a permanent-magnet synchronous motor (PMSM) is the stator winding resistance. Detection of PMSM winding resistance in the literature has been made on machines with relatively high resistances, where the resistive voltage vector is significant under load. This paper describes two techniques which can be applied to detect the winding resistance, through ‘Fixed Angle’ and ‘Fixed Mag- nitude’ current injection. Two further methods are described which discriminate injected current and voltages from motoring currents and voltages: ‘Unipolar’ and ‘Bipolar’ separation. These enable the resistance to be determined, and hence the winding temperature in permanent-magnet machines. These methods can be applied under load, and in a manner that does not disturb motor torque or speed. The method distinguishes between changes in the electro-motive force (EMF) constant and the resistive voltage. This paper introduces the techniques, whilst a companion paper covers the application of one of the methods to a PMSM drive system
First Record of the Mosquitoes \u3ci\u3eAedes Dupreei Psorophora Horrida,\u3c/i\u3e and \u3ci\u3ePsorophora Mathesoni\u3c/i\u3e (Diptera: Culicidae) in St. Joseph County, Indiana
(excerpt)
Adult females of Aedes (Ochlerotatus) dupreei (Coquillett), Psorophora (lanthinosoma) horrida (Dyar and Knab), and Psorophora (Janthinosoma) mathesoni (Belkin and Heinemann) were collected on 18 and 19 June 1981, in an oak woodlot in South Bend, Indiana
Nassau grouper (Epinephelus striatus) spawning aggregations: hydroacoustic surveys and geostatistical analysis
With the near extinction of many spawning aggregations of large grouper and snapper throughout the Caribbean, Gulf of Mexico, and tropical Atlantic, we need to provide baselines
for their conservation. Thus, there is a critical need to develop techniques for rapidly assessing the remaining known
(and unknown) aggregations. To this end we used mobile hydroacoustic surveys to estimate the density, spatial extent, and total abundance of a Nassau grouper spawning aggregation at Little Cayman Island, Cayman Islands, BWI.
Hydroacoustic estimates of abundance, density, and spatial extent were similar on two sampling occasions. The location
and approximate spatial extent of the Nassau grouper spawning aggregation near the shelf-break was corroborated by diver visual observations. Hydroacoustic density estimates were, overall, three-times higher than the average density observed by divers; however, we note that in some instances diver-estimated densities in localized
areas were similar to hydroacoustic density estimates. The resolution of the hydroacoustic transects and geostatistical
interpolation may have resulted in over-estimates in fish abundance, but still provided reasonable estimates of total spatial extent of the aggregation. Limitations in bottom time for scuba and visibility resulted in poor coverage of the entire Nassau grouper aggregation and low estimates
of abundance when compared to hydroacoustic estimates. Although the majority of fish in the aggregation were
well off bottom, fish that were sometimes in close proximity to the seafloor were not detected by the hydroacoustic survey. We conclude that diver observations of
fish spawning aggregations are critical to interpretations of hydroacoustic surveys, and that hydroacoustic surveys provide a more accurate estimate of overall fish abundance and spatial extent than diver observations. Thus, hydroacoustics is an emerging technology that, when coupled
with diver observations, provides a comprehensive survey method for monitoring spawning aggregations of fish
A video method for quantifying size distribution, density, and three-dimensional spatial structure of reef fish spawning aggregations
There is a clear need to develop fisheries independent methods to quantify individual sizes, density, and three dimensional characteristics of reef fish spawning aggregations for use in population assessments and to provide critical baseline data on reproductive life history of exploited populations. We designed, constructed, calibrated, and applied an underwater stereo-video system
to estimate individual sizes and three dimensional (3D) positions of Nassau grouper (Epinephelus striatus) at a spawning aggregation site located on a reef promontory on the western edge of Little Cayman Island, Cayman Islands, BWI, on 23 January 2003. The system consists of two free-running camcorders mounted on a meter-long bar and supported by a SCUBA diver. Paired video “stills” were
captured, and nose and tail of individual fish observed in the field of view of both cameras were digitized using image
analysis software. Conversion of these two dimensional screen coordinates to 3D coordinates was achieved through a matrix inversion algorithm and calibration data. Our estimate of mean total length (58.5 cm, n = 29) was in close agreement with estimated lengths from a hydroacoustic
survey and from direct measures of fish size using visual census techniques. We discovered a possible bias in length
measures using the video method, most likely arising from some fish orientations that were not perpendicular with respect to the optical axis of the camera system. We observed 40 individuals occupying a volume of 33.3 m3, resulting in a concentration of 1.2 individuals m–3 with a mean (SD) nearest neighbor distance of 70.0 (29.7) cm. We promote the use of roving diver stereo-videography as a method to assess the size distribution, density, and 3D spatial structure of fish spawning aggregations
The Rapidly Fading Afterglow from the Gamma-Ray Burst of 1999 May 6
We report on the discovery of the radio afterglow from the gamma-ray burst
(GRB) of 1999 May 6 (GRB 990506) using the Very Large Array (VLA). The radio
afterglow was detected at early times (1.5 days), but began to fade rapidly
sometime between 1 and 5 days after the burst. If we attribute the radio
emission to the forward shock from an expanding fireball, then this rapid onset
of the decay in the radio predicts that the corresponding optical transient
began to decay between 1 and 5 minutes after the burst. This could explain why
no optical transient for GRB 990506 was detected in spite of numerous searches.
The cause of the unusually rapid onset of the decay for the afterglow is
probably the result of an isotropically energetic fireball expanding into a low
density circumburst environment. At the location of the radio afterglow we find
a faint (R ~ 24 mag) host galaxy with a double morphology.Comment: in press at ApJ Letters, 13 page LaTeX document includes 2 postscript
figure
- …