Public Justification and the Reactive Attitudes

A distinctive position in contemporary political philosophy is occupied by those who defend the principle of public justification. This principle states that the moral or political rules that govern our common life must be in some sense justifiable to all reasonable citizens. In this article, I evaluate Gerald Gaus’s defence of this principle, which holds that it is presupposed by our moral reactive attitudes of resentment and indignation. He argues, echoing P.F. Strawson in ‘Freedom and Resentment’, that these attitudes are so deep a part of us that we are unable to rationally reject them. I examine and reject this defence of the principle. Considering the nature of our commitment to the moral reactive attitudes, I argue that those attitudes need not be grounded in a commitment to public justification. The availability of alternative grounds for these attitudes shows, contra Gaus, that we can rationally reject the principle of public justification while maintaining a wholehearted commitment to the reactive attitudes

Synchronisation Properties of Trees in the Kuramoto Model

We consider the Kuramoto model of coupled oscillators, specifically the case of tree networks, for which we prove a simple closed-form expression for the critical coupling. For several classes of tree, and for both uniform and Gaussian vertex frequency distributions, we provide tight closed form bounds and empirical expressions for the expected value of the critical coupling. We also provide several bounds on the expected value of the critical coupling for all trees. Finally, we show that for a given set of vertex frequencies, there is a rearrangement of oscillator frequencies for which the critical coupling is bounded by the spread of frequencies.Comment: 21 pages, 19 Figure

Non-Contact Temperature Requirements (NCTM) for drop and bubble physics

Many of the materials research experiments to be conducted in the Space Processing program require a non-contaminating method of manipulating and controlling weightless molten materials. In these experiments, the melt is positioned and formed within a container without physically contacting the container's wall. An acoustic method, which was developed by Professor Taylor G. Wang before coming to Vanderbilt University from the Jet Propulsion Laboratory, has demonstrated the capability of positioning and manipulating room temperature samples. This was accomplished in an earth-based laboratory with a zero-gravity environment of short duration. However, many important facets of high temperature containerless processing technology have not been established yet, nor can they be established from the room temperature studies, because the details of the interaction between an acoustic field an a molten sample are largely unknown. Drop dynamics, bubble dynamics, coalescence behavior of drops and bubbles, electromagnetic and acoustic levitation methods applied to molten metals, and thermal streaming are among the topics discussed

The association of cobalt with iron and manganese (oxyhydr)oxides in marine sediment.

Formation and dissolution of authigenic Fe and Mn (oxyhydr)oxides influence cycling of trace metals in oxic/suboxic surface sediments.We used the diffusive gradients in thin films technique (DGT) to estimate the association of cobalt with iron and manganese oxides. We compared Co, Fe and Mn maxima measured by DGT in the pore waters of fresh and aged marine sediment cores and estimated the Co/Fe and Co/Mn ratios in the metal oxides. A Mn maximum was not visible in DGT concentration profiles of freshly collected sediment cores, but after ageing the sediment we observed a distinct Mn peak, presumably due to broadening of the depth range over which the various electron acceptors occur. Estimated Co/Mn ratios from both experiments are within the range of literature values for marine sediments, but the value from the aged experiment is at the lower end of the range. This is attributed to stimulation of sulphate reduction and precipitation of cobalt sulfides. The good correlation between Co and Fe maxima in the fresh sediments is attributed to the similarity of their reactions with sulphide rather than Co being released during authigenic Fe oxide reduction

Use of an audio-paced incremental swimming test in young national-level swimmers

Purpose:To evaluate the reliability and sensitivity to training of an audio-paced incremental swimming test.Methods:Eight young national-level male swimmers (age 15 ± 1 year) performed a 7 × 200-m incremental swimming test (velocities 1.19, 1.24, 1.28, 1.33, 1.39, and 1.45 m/s and maximal sprint pace) using an audio-pacing device. The same test was performed 4 times by each participant, 1 wk apart to assess reliability (WK1, WK2) and after 9 and 20 wk of training (WK9, WK20). Blood lactate concentration ([La−]) and heart rate (HR) were recorded after each stage. Outcome measures were the velocity (v) and HR at lactate markers of 2 mM, 4 mM, and Δ1 mM.Results:Velocities at the lactate markers proved to be more reliable than HR, with typical errors ranging from 0.66% to 2.30% and 1.28% to 4.50%, respectively (shifts in mean ranged –0.91% to 0.73% and –0.84% to 1.79%, respectively). Across WK1, WK9, and WK20 there were significant improvements in peak velocity (P &lt; .001) and each of the velocities associated with the lactate markers (P &lt; .05), whereas only HR at Δ1 mM improved (P &lt; .05).Conclusions:This article demonstrates that an audio-paced incremental swimming test is reliable for use with junior swimmers and is sensitive to changes observed after training. The postswimming measurement of HR in the pool was comparatively less reliable.</jats:sec

A study of the enzymatic hydrolysis of fish frames using model systems

A model system was employed to study the operating conditions and primary parameters of enzymic hydrolysis of cod proteins. Pancreatin, papain, and bromelain were used to hydrolyse minced cod fillets under controlled conditions and with the rate of hydrolysis being continually monitored via both the pH-stat and TNBS method. The two methods were compared and evaluated. The rate of protein solubilisation was plotted against the degree of hydrolysis (DH). Dry fish protein hydrolysate (FPH) powders having short, medium and high degrees of hydrolysis (DH of approximately 8%, 11% and 16% respectively) were produced and analysed for their molecular weight distribution, using size exclusion chromatography. Almost complete protein solubilisation (75 g soluble protein per kg hydrolysis solution) could be achieved within an hour, at 40°C, at 1% enzyme/substrate ratio (w/w) with papain and bromelain. The pH-stat was found capable of continuously following the rate of hydrolysis but only at low DH. The TNBS could be accurately used even at high DH to estimate the percentage of the peptide bonds cleaved, but required chemical analysis of withdrawn samples

Enzymatic hydrolysis of fish frames using pilot plant scale systems

Papain was used to hydrolyse fish frames under controlled conditions at a batch-pilot plant scale-process, for the pro-duction of fish protein hydrolysates (FPH). Mass balance calculations were carried out so that the rate of hydrolysis, rate of protein solubilisation and yields could be estimated. Almost complete hydrolysis could be achieved in 1 hour, at 40°C, with no pH adjustment, at 0.5% (5 g·kg−1) enzyme to substrate ratio (E/S, were S is Kjeldahl protein) using whole fish frames (including heads and flaps). This was achieved both with the addition of water (1/1 to 2/1 frames/water) but more importantly from commercial considerations without the initial addition of water (after mincing of the fish mate-rial). The degree of protein solubilisation ranged between 71% - 86% w/w. Four different processes are described, namely: 1) a soluble spray-dried FPH powder; 2) a liquid FPH; 3) a partly soluble, spray dried FPH powder and; 4) a crude, drum-dried protein for animal consumption. The amino acid profile of the FPH was identical to that of the par-ent substrate (fish frames)

THE BLE CLOAKER: SECURING IMPLANTABLE MEDICAL DEVICE COMMUNICATION OVER BLUETOOTH LOW ENERGY LINKS

Historically Implantable Medical Devices (IMDs) such as pacemakers have only been able to communicate to external devices through close proximity means of communication, primarily through inductive telemetry. Because of the unlikelihood of an adversary being able to gain access to an IMD through this type of communication, these devices were never designed with security in mind. However the recent advent of IMDs that are equipped with long-range wireless capabilities has made it necessary to consider how to secure these devices from malicious attacks. This work presents an implementation of prior work that developed a theoretical security model whose specific intent was to secure IMDs with long-range wireless capabilities against both passive and active adversaries, while also ensuring the safety of the patient. This implementation is known as the Bluetooth Low Energy (BLE) Cloaker model and provides a prototype system that uses BLE as the long-range communication medium between an emulated IMD, an external programmer, and the BLE Cloaker device itself. The BLE Cloaker acts as a secure data proxy between the IMD and the external programmer. This prototype shows the benefits and drawbacks of this theoretical model when used in a real world system as well as the security strengths and weaknesses of using BLE as the wireless link in a medical application