1,500 research outputs found
Event tracking for real-time unaware sensitivity analysis (EventTracker)
This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2013 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.This paper introduces a platform for online Sensitivity Analysis (SA) that is applicable in large scale real-time data acquisition (DAQ) systems. Here we use the term real-time in the context of a system that has to respond to externally generated input stimuli within a finite and specified period. Complex industrial systems such as manufacturing, healthcare, transport, and finance require high quality information on which to base timely responses to events occurring in their volatile environments. The motivation for the proposed EventTracker platform is the assumption that modern industrial systems are able to capture data in real-time and have the necessary technological flexibility to adjust to changing system requirements. The flexibility to adapt can only be assured if data is succinctly interpreted and translated into corrective actions in a timely manner. An important factor that facilitates data interpretation and information modelling is an appreciation of the affect system inputs have on each output at the time of occurrence. Many existing sensitivity analysis methods appear to hamper efficient and timely analysis due to a reliance on historical data, or sluggishness in providing a timely solution that would be of use in real-time applications. This inefficiency is further compounded by computational limitations and the complexity of some existing models. In dealing with real-time event driven systems, the underpinning logic of the proposed method is based on the assumption that in the vast majority of cases changes in input variables will trigger events. Every single or combination of events could subsequently result in a change to the system state. The proposed event tracking sensitivity analysis method describes variables and the system state as a collection of events. The higher the numeric occurrence of an input variable at the trigger level during an event monitoring interval, the greater is its impact on the final analysis of the system state. Experiments were designed to compare the proposed event tracking sensitivity analysis method with a comparable method (that of Entropy). An improvement of 10% in computational efficiency without loss in accuracy was observed. The comparison also showed that the time taken to perform the sensitivity analysis was 0.5% of that required when using the comparable Entropy based method.EPSR
Flexible data input layer architecture (FDILA) for quick-response decision making tools in volatile manufacturing systems
This paper proposes the foundation for a flexible data input management system as a vital part of a generic solution for quick-response decision making. Lack of a comprehensive data input layer between data acquisition and processing systems has been realized and thought of. The proposed FDILA is applicable to a wide variety of volatile manufacturing environments. It provides a generic platform that enables systems designers to define any number of data entry points and types regardless of their make and specifications in a standard fashion. This is achieved by providing a variable definition layer immediately on top of the data acquisition layer and before data pre-processing layer. For proof of concept, National Instruments’ Labview data acquisition software is used to simulate a typical shop floor data acquisition system. The extracted data can then be fed into a data mining module that builds cost modeling functions involving the plant’s Key Performance Factors
Advanced Primary Lymphoma of Oral Cavity: Report of a Case
Abstract
Usually the oral manifestations of NHL are secondary to a more widespread involvement throughout
the body, however, it can rarely present as a primary lesion in the oral cavity, having 0.1% -
0.2% prevalence. In this paper we report a case of highly proliferative oral non-Hodgkin lymphoma
which presented with very mild symptoms, but had a sudden and significant progression in
less than two weeks with involvement of all four quadrants of the oral cavity.
Keywords
Lymphoma; Intra Oral Swelling; Four Quadran
The effect of dual tasking on foot biomechanics in people with functional ankle instability
Background: Some cases of repeated inversion ankle sprains are thought to have a neurological basis and are termed functional ankle instability (FAI). In addition to factors local to the ankle, such as loss of proprioception, cognitive demands have the ability to influence motor control and may increase the risk of repetitive lateral sprains.
Objective: The purpose of this study was to investigate the effect of cognitive demand on foot kinematics in physically active people with functional ankle instability.
Methods: 21 physically active participants with FAI and 19 matched healthy controls completed trials of normal walking (single task) and normal walking while performing a cognitive task (dual task). Foot motion relative to the shank was recorded. Cognitive performance, ankle kinematics and movement variability in single and dual task conditions was characterized.
Results: During normal walking, the ankle joint was significantly more inverted in FAI compared to the control group pre and post initial contact. Under dual task conditions, there was a statistically significant increase in frontal plane foot movement variability during the period 200ms pre and post initial contact in people with FAI compared to the control group (p<0.05). Dual task also significantly increased plantar flexion and inversion during the period 200ms pre and post initial contact in the FAI group (p<0.05).
Conclusion: participants with FAI demonstrated different ankle movement patterns and increased movement variability during a dual task condition. Cognitive load may increase risk of ankle instability in these people
Disaster risk management approaches in construction and built environment: A research collaboration networks perspective
© 2019, Emerald Publishing Limited. Purpose: Currently there is no analysis of the development of disaster risk management literature in the construction and built environment context, the changes in its research paradigms over time and the role of different key players in the advance of its current body of knowledge. This study aims to address that gap by investigating the longitudinal data of disaster risk management literature published over the past three decades. Design/methodology/approach: A social network analysis approach is used in this study to show the overall development of the field and specifically the impact of research collaborations between different organisations and countries on research productivity. Findings: The results indicate that the focus of disaster risk management research in the built environment context is heavily biased towards reactive strategies (response and recovery) over proactive strategies (mitigation and preparedness). The findings also demonstrate that collaboration between disaster risk management researchers has a significant influence on their research productivity. Originality/value: The findings from this study should be of value to researchers, policymakers and academic strategists. This study for the first time shows the ability of the social networks paradigm to reveal frailties in research connections in the field of disaster risk management in construction and built environment and highlights where networking strategies are needed
Cost-Effective Double-Layer Hydrogel Composites for Wound Dressing Applications.
Although poly vinyl alcohol-poly acrylic acid (PVA-PAA) composites have been widely used for biomedical applications, their incorporation into double-layer assembled thin films has been limited because the interfacial binding materials negatively influence the water uptake capacity of PVA. To minimize the effect of interfacial binding, a simple method for the fabrication of a double-layered PVA-PAA hydrogel was introduced, and its biomedical properties were evaluated in this study. Our results revealed that the addition of PAA layers on the surface of PVA significantly increased the swelling properties. Compared to PVA, the equilibrium swelling ratio of the PVA-PAA hydrogel increased (p = 0.035) and its water vapour permeability significantly decreased (p = 0.04). Statistical analysis revealed that an increase in pH value from 7 to 10 as well as the addition of PAA at pH = 7 significantly increased the adhesion force (p < 0.04). The mechanical properties-including ultimate tensile strength, modulus, and elongation at break-remained approximately untouched compared to PVA. A significant increase in biocompatibility was found after day 7 (p = 0.016). A higher release rate for tetracycline was found at pH = 8 compared to neutral pH
Resource-Efficient High-Dimensional Entanglement Detection via Symmetric Projections
We introduce two families of criteria for detecting and quantifying the entanglement of a bipartite quantum state of arbitrary local dimension. The first is based on measurements in mutually unbiased bases and the second is based on equiangular measurements. Both criteria give a qualitative result in terms of the state's entanglement dimension and a quantitative result in terms of its fidelity with the maximally entangled state. The criteria are universally applicable since no assumptions on the state are required. Moreover, the experimenter can control the trade-off between resource-efficiency and noise-tolerance by selecting the number of measurements performed. For paradigmatic noise models, we show that only a small number of measurements are necessary to achieve nearly-optimal detection in any dimension. The number of global product projections scales only linearly in the local dimension, thus paving the way for detection and quantification of very high-dimensional entanglement
Using Porous Media to Enhancement of Heat Transfer in Heat Exchangers
According to increasing human needs for energy and to avoid energy waste, researchers are struggling to increase the efficiency of energy production and energy conversion. One of these methods is increasing heat transfer and reducing heat dissipation in heat exchangers. Using porous materials in the fluid flow is one of the passive methods to increase heat transfer in heat exchangers. The existence of porous media in the flow path, improve the matrix of thermal conductivity and effective flow thermal capacity and also matrix of porous-solid increase radiation heat transfer, especially in two phase flow (gas-water) systems. In this paper, recent studies on the effect of using porous media on enhancement the amount of heat transfer in heat exchangers has been investigated via using porous media with difference porosity percentage, material and geometric structure in the flow path in numerical simulations and laboratory studies
Effect of Operating Conditions of the Extraction Process on the Physical Properties of Lubricating Oil
Lubricating base oil is commonly extracted from lube-oil cut, a petroleum cut, with the use of an aromatic solvent. Aromatic content of the final product is an important criterion specifying the product quality. The aromatic removal process to produce the lubricating oil should be carried out in a Liquid-Liquid extraction column. In a typical solvent extraction process, solvent to feed ratio, solvent and feed temperatures, agitation rate, and settling time could directly affect the yield of extraction. In the current study, the effect of agitation rate and settling time on the yield of extraction was studied. It was found that a settling time of 2hrs and an agitation rate of 430 RPM to be the optimum parameters of the extraction process
A collection of wet beam models for wave–ice interaction
Theoretical models for the prediction of decay rate and dispersion process of gravity waves traveling into an integrated ice cover expanded over a long way are introduced. The term “wet beam” is chosen to refer to these models as they are developed by incorporating water-based damping and added mass forces. Presented wet beam models differ from each other according to the rheological behavior considered for the ice cover. Two-parameter viscoelastic solid models accommodating Kelvin–Voigt (KV) and Maxwell mechanisms along with a one-parameter elastic solid model are used to describe the rheological behavior of the ice layer. Quantitative comparison between the landfast ice field data and model predictions suggests that wet beam models, adopted with both KV and Maxwell mechanisms, predict the decay rate more accurately compared to a dry beam model. Furthermore, the wet beam models, adopted with both KV and Maxwell mechanisms, are found to construct decay rates of disintegrated ice fields, though they are built for a continuous ice field. Finally, it is found that wet beam models can accurately construct decay rate curves of freshwater ice, though they cannot predict the dispersion process of waves accurately. To overcome this limitation, three-parameter solid models, termed standard linear solid (SLS) mechanisms, are suggested to be used to re-formulate the dispersion relationship of wet beam models, which were seen to construct decay rates and dispersion curves of freshwater ice with an acceptable level of accuracy. Overall, the two-parameter wet beam dispersion relationships presented in this research are observed to predict decay rates and dispersion process of waves traveling into actual ice covers, though three-parameter wet beam models were seen to reconstruct the those of freshwater ice formed in a wave flume. The wet beam models presented in this research can be implemented in spectral models on a large geophysical scale.</p
- …