648 research outputs found
The measurement of lubricant-film thickness using ultrasound
Ultrasound is reflected from a liquid layer between two solid bodies. This reflection depends on the ultrasonic frequency, the acoustic properties of the liquid and solid, and the layer thickness. If the wavelength is much greater than the liquid-layer thickness, then the response is governed by the stiffness of the layer. If the wavelength and layer thickness are similar, then the interaction of ultrasound with the layer is controlled by its resonant behaviour. This stiffness governed response and resonant response can be used to determine the thickness of the liquid layer, if the other parameters are known.
In this paper, ultrasound has been developed as a method to determine the thickness of lubricating films in bearing systems. An ultrasonic transducer is positioned on the outside of a bearing shell such that the wave is focused on the lubricant-film layer. The transducer is used to both emit and receive wide-band ultrasonic pulses. For a particular lubricant film, the reflected pulse is processed to give a reflection-coefficient spectrum. The lubricant-film thickness is then obtained from either the layer stiffness or the resonant frequency.
The method has been validated using fluid wedges at ambient pressure between flat and curved surfaces. Experiments on the elastohydrodynamic film formed between a sliding ball and a flat surface were performed. Film-thickness values in the range 50-500 nm were recorded, which agreed well with theoretical film-formation predictions. Similar measurements have been made on the oil film between the balls and outer raceway of a deep-groove ball bearing
Auto-calibration of ultrasonic lubricant-film thickness measurements
The measurement of oil film thickness in a lubricated component is essential information for performance monitoring and design. It is well established that such measurements can be made ultrasonically if the lubricant film is modelled as a collection of small springs. The ultrasonic method requires that component faces are separated and a reference reflection recorded in order to obtain a reflection coefficient value from which film thickness is calculated. The novel and practically useful approach put forward in this paper and validated experimentally allows reflection coefficient measurement without the requirement for a reference. This involves simultaneously measuring the amplitude and phase of an ultrasonic pulse reflected from a layer. Provided that the acoustic properties of the substrate are known, the theoretical relationship between the two can be fitted to the data in order to yield reflection coefficient amplitude and phase for an infinitely thick layer. This is equivalent to measuring a reference signal directly, but importantly does not require the materials to be separated. The further valuable aspect of this approach, which is demonstrated experimentally, is its ability to be used as a self-calibrating routine, inherently compensating for temperature effects. This is due to the relationship between the amplitude and phase being unaffected by changes in temperature which cause unwanted changes to the incident pulse. Finally, error analysis is performed showing how the accuracy of the results can be optimized. A finding of particular significance is the strong dependence of the accuracy of the technique on the amplitude of reflection coefficient input data used. This places some limitations on the applicability of the technique. © 2008 IOP Publishing Ltd
Achieving equal standards in medical student education: is a national exit examination the answer?
The document attached has been archived with permission from the editor of the Medical Journal of Australia. An external link to the publisher’s copy is included.Although it is commonly assumed that the quality of medical school education in Australia is uniformly high, there is no national process for assessing its outcomes. There is substantial variability in the content of medical school curricula, and the process of curriculum change is becoming more challenging because of intense competition for time and space in the course. A national exit examination could provide a uniform standard of assessment for all medical school graduates in Australia, as well as foreign graduates applying to work in Australia. Such an examination could assess medical school outcomes, monitor the effects of curriculum change, and provide a benchmark for new medical schools that would help medical curricula evolve to better meet society’s needs.Bogda Koczwara, Martin H N Tattersall, Michael B Barton, Brendon J Coventry, Joanna M Dewar, Jeremy L Millar, Ian N Olver, Max A Schwarz, Darren L Starmer, David R Turner and Martin R Stockler, for the Cancer Council of Australia Oncology Education Committe
Identification and quantitation of tumour cells in cell suspensions: a comparison of cytology and flow cytometry.
Cisplatin-induced emesis: systematic review and meta-analysis of the ferret model and the effects of 5-HT3 receptor antagonists
PURPOSE: The ferret cisplatin emesis model has been used for ~30 years and enabled identification of clinically used anti-emetics. We provide an objective assessment of this model including efficacy of 5-HT(3) receptor antagonists to assess its translational validity. METHODS: A systematic review identified available evidence and was used to perform meta-analyses. RESULTS: Of 182 potentially relevant publications, 115 reported cisplatin-induced emesis in ferrets and 68 were included in the analysis. The majority (n = 53) used a 10 mg kg(−1) dose to induce acute emesis, which peaked after 2 h. More recent studies (n = 11) also used 5 mg kg(−1), which induced a biphasic response peaking at 12 h and 48 h. Overall, 5-HT(3) receptor antagonists reduced cisplatin (5 mg kg(−1)) emesis by 68% (45–91%) during the acute phase (day 1) and by 67% (48–86%) and 53% (38–68%, all P < 0.001), during the delayed phase (days 2, 3). In an analysis focused on the acute phase, the efficacy of ondansetron was dependent on the dosage and observation period but not on the dose of cisplatin. CONCLUSION: Our analysis enabled novel findings to be extracted from the literature including factors which may impact on the applicability of preclinical results to humans. It reveals that the efficacy of ondansetron is similar against low and high doses of cisplatin. Additionally, we showed that 5-HT(3) receptor antagonists have a similar efficacy during acute and delayed emesis, which provides a novel insight into the pharmacology of delayed emesis in the ferret
Discriminative stimulus effects of tiagabine and related GABAergic drugs in rats
Abstract Rationale Tiagabine is an anticonvulsant drug which may also have sleep-enhancing properties. It acts by inhibiting reuptake at the gamma-aminobutyric acid (GABA) transporter (GAT-1). Objectives The aim of the study was to determine whether tiagabine acted as a discriminative stimulus and, if so, whether other GABAergic compounds would generalise to it. Materials and methods Rats were trained to discriminate tiagabine (30 mg/kg p.o.) from vehicle, and generalisation to drugs that modulate GABA was assessed. Results Gaboxadol (5-20 mg/kg p.o.), a selective extrasynaptic GABA A agonist, generalised to tiagabine, although the extent of the generalisation was inconclusive. Indiplon (1 mg/kg p.o.), a benzodiazepine-like hypnotic, also partially generalised to tiagabine, although zolpidem and S-zopiclone did not. Baclofen, a GABA B receptor agonist, and gabapentin, which increases synaptic GABA, did not generalise to tiagabine. (+)-Bicuculline (3 mg/kg i.p.), a GABA A receptor antagonist, blocked the tiagabine cue, but the less brainpenetrant salt form, bicuculline methochloride, had no effect. Conclusions These data suggest that tiagabine generates a discriminative stimulus in rats, and provides a central GABA-mediated cue, but is distinct from the other GABAergic compounds tested
Recommended from our members
The PNL high-transmission three-stage mass spectrometer
We have constructed a three-stage isotope-ratio mass spectrometer of unique ion-optical design that achieves high ion transmission efficiency and high abundance sensitivity. The spectrometer has tandem 90[degrees] -deflection magnets with boundaries 18[degrees] off normal. The magnet drift lengths are 1.48 times the 27-cm radius of deflection. This extended geometry gives mass dispersion equivalent to a 40-cm-radius magnet with normal boundaries. The first magnet renders the ion beam parallel in the vertical plane and provides a focus in the horizontal plane of mass dispersion. The second magnet brings the beam to a stigmatic focus. This novel ion-optical design gives 100% transmission without the need for intermediate focusing lenses. It also provides a 16% increase in mass resolution over the traditional tandem geometry with normal magnet boundaries. Complete transmission of ions is maintained through a third-stage cylindrical electric sector of 38-cm radius, which provides increased isotope-abundance sensitivity. The isotope-abundance sensitivity of the new mass spectrometer is an order of magnitude better than similar instruments with normal magnet boundaries. This is because the vertical focusing of the ion beam prevents ion scattering from the top and bottom of the flight tube. The measured values of the isotope-abundance sensitivity one-half mass unit away from the rhenium ion peaks at masses 185 and 187 are M [minus] 1/2 = (6.5 [plus minus] 0.5)[times] 0[sup [minus]10] M + 1/2 = (3.1 [plus minus] 0.8) [times] 10[sup [minus]10]. By extrapolation, the uranium isotope-abundance sensitivity is m [minus] 1 = 1 [times] 10[sup [minus]10]. Construction of the instrument was facilitated by using standard commercial mass spectrometer components
Les Houches 2015: Physics at TeV colliders - new physics working group report
We present the activities of the 'New Physics' working group for the 'Physics
at TeV Colliders' workshop (Les Houches, France, 1-19 June, 2015). Our report
includes new physics studies connected with the Higgs boson and its properties,
direct search strategies, reinterpretation of the LHC results in the building
of viable models and new computational tool developments. Important signatures
for searches for natural new physics at the LHC and new assessments of the
interplay between direct dark matter searches and the LHC are also considered.Comment: Proceedings of the New Physics Working Group of the 2015 Les Houches
Workshop, Physics at TeV Colliders, Les Houches 1-19 June 2015. 197 page
Teacher unionism in changing times: is this the real “new unionism”?
This article provides a case study of union change in an environment in which radical school restructuring is taking place, and active strategies to weaken and marginalize organized teachers are being pursued by the state. The case study union is the National Union of Teachers in England. The article explores a number of different strategies open to teacher unions, utilizing a framework provided by Turner (2004). Drawing on data collected at a national level, and in three local authority areas, I argue that the National Union of Teachers’ response to the erosion of collective bargaining is best presented as an amalgam of strategies focused on workplace organizing, political campaigning, and coalition building. The data demonstrate considerable congruence between national and local strategies, although local data reveal considerable challenges in implementation and consequently considerable unevenness in local experiences
Comparing chromosomal and mitochondrial phylogenies of the Indriidae (Primates, Lemuriformes)
The Malagasy primate family Indriidae comprises three genera with up to 19 species. Cytogenetic and molecular phylogenies of the Indriidae have been performed with special attention to the genus Propithecus. Comparative R-banding and FISH with human paints were applied to karyotypes of representatives of all three genera and confirmed most of the earlier R-banding results. However, additional chromosomal rearrangements were detected. A reticulated and a cladistic phylogeny, the latter including hemiplasies, have been performed. Cladistic analysis of cytogenetic data resulted in a phylogenetic tree revealing (1) monophyly of the family Indriidae, (2) monophyly of the genus Avahi, (3) sister–group relationships between Propithecus diadema and Propithecus edwardsi, and (4) the grouping of the latter with Indri indri, Propithecus verreauxi, and Propithecus tattersalli, and thus suggesting paraphyly of the genus Propithecus. A molecular phylogeny based on complete mitochondrial cytochrome b sequences of 16 species indicated some identical relationships, such as the monophyly of Avahi and the sister–group relationships of the eastern (P. diadema and P. edwardsi) to the western Propithecus species (P. verreauxi, Propithecus coquereli, and P. tattersalli). However, the main difference between the molecular and cytogenetic phylogenies consists in an early divergence of Indri in the molecular phylogeny while in the chromosomal phylogeny it is nested within Propithecus. The similarities and differences between molecular and cytogenetic phylogenies in relation to data on the species’ geographic distributions and mating systems allow us to propose a scenario of the evolution of Indriidae. Chromosomal and molecular processes alone or in combination created a reproductive barrier that was then followed by further speciation processes
- …