640 research outputs found
Evaluation of temporal moments and Fourier transformed data in time-domain diffuse optical tomography
Time-domain diffuse optical tomography (TD-DOT) uses near-infrared pulsed lasers as light sources to measure time-varying exitance on the boundary of the target. These are used to estimate optical properties of the imaged target. Several integral-transform-based moments of the time-resolved data have been utilized in TD-DOT, the most common being the mean time of flight and variance. Recently, it has been shown that Fourier transforming the time-domain data to frequency domain enables utilization of these data at one or several frequencies, producing equally as good estimates as the whole time-domain data. In this work, we present a systematic comparison of the usage of the temporal moments and Fourier transformed data in TD-DOT. Both absolute and difference imaging are evaluated using numerical simulations. The simulations show that utilizing temporal moments and Fourier transformed data in TD-DOT provides good quality reconstructions with a good estimation accuracy. These estimates are improved if more than one data type is used. Furthermore, the simulations show that the frequency-domain computations enable computationally cheaper and straightforward implementation of the inverse solver when compared to the temporal moments
Time-domain diffuse optical tomography utilizing truncated Fourier series approximation
Diffuse optical tomography (DOT) uses near infrared light for in vivo imaging of spatially varying optical parameters in biological tissues. It is known that time-resolved measurements provide the richest information on soft tissues, among other measurement types in DOT such as steady-state and intensity-modulated measurements. Therefore, several integral-transform-based moments of the time-resolved DOT measurements have been considered to estimate spatially distributed optical parameters. However, the use of such moments can result in low-contrast images and cross-talks between the reconstructed optical parameters, limiting their accuracy. In this work, we propose to utilize a truncated Fourier series approximation in time-resolved DOT. Using this approximation, we obtained optical parameter estimates with accuracy comparable to using whole time-resolved data that uses low computational time and resources. The truncated Fourier series approximation based estimates also displayed good contrast and minimal parameter cross-talk, and the estimates further improved in accuracy when multiple Fourier frequencies were used
Calibration of the TVO spent BWR reference fuel assembly : Final report on the joint Task JNT61 of the Finnish and Swedish Support Programmes to IAEA Safeguards
A model-based iterative learning approach for diffuse optical tomography
Diffuse optical tomography (DOT) utilises near-infrared light for imaging spatially distributed optical parameters, typically the absorption and scattering coefficients. The image reconstruction problem of DOT is an ill-posed inverse problem, due to the non-linear light propagation in tissues and limited boundary measurements. The ill-posedness means that the image reconstruction is sensitive to measurement and modelling errors. The Bayesian approach for the inverse problem of DOT offers the possibility of incorporating prior information about the unknowns, rendering the problem less ill-posed. It also allows marginalisation of modelling errors utilising the so-called Bayesian approximation error method. A more recent trend in image reconstruction techniques is the use of deep learning, which has shown promising results in various applications from image processing to tomographic reconstructions. In this work, we study the non-linear DOT inverse problem of estimating the (absolute) absorption and scattering coefficients utilising a ‘model-based’ learning approach, essentially intertwining learned components with the model equations of DOT. The proposed approach was validated with 2D simulations and 3D experimental data. We demonstrated improved absorption and scattering estimates for targets with a mix of smooth and sharp image features, implying that the proposed approach could learn image features that are difficult to model using standard Gaussian priors. Furthermore, it was shown that the approach can be utilised in compensating for modelling errors due to coarse discretisation enabling computationally efficient solutions. Overall, the approach provided improved computation times compared to a standard Gauss-Newton iteration
Perturbation Monte Carlo Method for Quantitative Photoacoustic Tomography
Quantitative photoacoustic tomography aims at estimating optical parameters from photoacoustic images that are formed utilizing the photoacoustic effect caused by the absorption of an externally introduced light pulse. This optical parameter estimation is an ill-posed inverse problem, and thus it is sensitive to measurement and modeling errors. In this work, we propose a novel way to solve the inverse problem of quantitative photoacoustic tomography based on the perturbation Monte Carlo method. Monte Carlo method for light propagation is a stochastic approach for simulating photon trajectories in a medium with scattering particles. It is widely accepted as an accurate method to simulate light propagation in tissues. Furthermore, it is numerically robust and easy to implement. Perturbation Monte Carlo maintains this robustness and enables forming gradients for the solution of the inverse problem. We validate the method and apply it in the framework of Bayesian inverse problems. The simulations show that the perturbation Monte Carlo method can be used to estimate spatial distributions of both absorption and scattering parameters simultaneously. These estimates are qualitatively good and quantitatively accurate also in parameter scales that are realistic for biological tissues
Feature Extraction Methods for Studying Surface Electromyography and Kinematic Measurements in Parkinson’s Disease
Nonlinear approach to difference imaging in diffuse optical tomography
Difference imaging aims at recovery of the change in the optical properties of a body based on measurements before and after the change. Conventionally, the image reconstruction is based on using difference of the measurements and a linear approximation of the observation model. One of the main benefits of the linearized difference reconstruction is that the approach has a good tolerance to modeling errors, which cancel out partially in the subtraction of the measurements. However, a drawback of the approach is that the difference images are usually only qualitative in nature and their spatial resolution can be weak because they rely on the global linearization of the nonlinear observation model. To overcome the limitations of the linear approach, we investigate a nonlinear approach for difference imaging where the images of the optical parameters before and after the change are reconstructed simultaneously based on the two datasets. We tested the feasibility of the method with simulations and experimental data from a phantom and studied how the approach tolerates modeling errors like domain truncation, optode coupling errors, and domain shape errors
Effects of microwave vs. convection oven heating on the formation of oxidation products in canola (Brassica rapa subsp. oleifera) oil
Research on the effects of microwave vs. "conventional" heating of dietary oils on lipid oxidation has been very limited. In this study, canola oil (Brassica rapa subsp. oleifera) was heated in either convection or microwave oven to compare the effects of heating methods on triacylglycerol (TAG) oxidation. Peroxide and p-anisidine values (PV and p-AV, respectively) were determined and liquid chromatography-mass spectrometric (LC-MS) analysis of non-oxidized and oxidized TAG molecular species was performed. Neither of the heat treatments caused any considerable changes in PV of the oil samples. However, increase in p-AV was observed. The change was higher in the oil heated in microwave oven, demonstrating a higher increase in the amount of secondary oxidation products. The changes were accompanied by a decrease in the polyunsaturated TAG molecular species ACN:DB (acyl carbon number: number of double bonds) 54: 7 and 54: 6, this change also being higher in the oil heated in microwave oven
- …