56,149 research outputs found
Design of ternary signals for MIMO identification in the presence of noise and nonlinear distortion
A new approach to designing sets of ternary periodic signals with different periods for multi-input multi-output system identification is described. The signals are pseudo-random signals with uniform nonzero harmonics, generated from Galois field GF(q), where q is a prime or a power of a prime. The signals are designed to be uncorrelated, so that effects of different inputs can be easily decoupled. However, correlated harmonics can be included if necessary, for applications in the identification of ill-conditioned processes. A design table is given for q les 31. An example is presented for the design of five uncorrelated signals with a common period N = 168 . Three of these signals are applied to identify the transfer function matrix as well as the singular values of a simulated distillation column. Results obtained are compared with those achieved using two alternative methods
A heterotic sigma model with novel target geometry
We construct a (1,2) heterotic sigma model whose target space geometry
consists of a transitive Lie algebroid with complex structure on a Kaehler
manifold. We show that, under certain geometrical and topological conditions,
there are two distinguished topological half--twists of the heterotic sigma
model leading to A and B type half--topological models. Each of these models is
characterized by the usual topological BRST operator, stemming from the
heterotic (0,2) supersymmetry, and a second BRST operator anticommuting with
the former, originating from the (1,0) supersymmetry. These BRST operators
combined in a certain way provide each half--topological model with two
inequivalent BRST structures and, correspondingly, two distinct perturbative
chiral algebras and chiral rings. The latter are studied in detail and
characterized geometrically in terms of Lie algebroid cohomology in the
quasiclassical limit.Comment: 83 pages, no figures, 2 references adde
Electron and trap dynamics in As-ion-implanted and annealed GaAs
The ultrafast dynamics of As-ion-implanted and annealed GaAs is investigated using transmission pumpāprobe measurements.Carrier recombination time was found to increase from 4 to 40 ps with increasing annealing temperature. At lower annealing temperatures, the transmitted optical signal is dominated by induced absorption and at higher annealing temperatures this effect is replaced by induced transparency.This work was supported in part by the EC INCOCOPERNICUS
project āāDUOādevices for ultrafast optoelectronicsāā
and the Lithuanian Science and Study Foundation
Implementation of Design Changes Towards a More Reliable, Hands-off Magnetron Ion Source
As the main ion source for the accelerator complex, magnetron ion
sources have been used at Fermilab since the 1970s. At the offline test stand,
new R&D is carried out to develop and upgrade the present magnetron-type
sources of ions of up to 80 mA and 35 keV beam energy in the context of
the Proton Improvement Plan. The aim of this plan is to provide high-power
proton beams for the experiments at FNAL. In order to reduce the amount of
tuning and monitoring of these ion sources, a new electronic system consisting
of a current-regulated arc discharge modulator allow the ion source to run at a
constant arc current for improved beam output and operation. A solenoid-type
gas valve feeds gas into the source precisely and independently of
ambient temperature. This summary will cover several studies and design changes
that have been tested and will eventually be implemented on the operational
magnetron sources at Fermilab. Innovative results for this type of ion source
include cathode geometries, solenoid gas valves, current controlled arc pulser,
cesium boiler redesign, gas mixtures of hydrogen and nitrogen, and duty factor
reduction, with the aim to improve source lifetime, stability, and reducing the
amount of tuning needed. In this summary, I will highlight the advances made in
ion sources at Fermilab and will outline the directions of the continuing R&D
effort.Comment: 4 pp. arXiv admin note: substantial text overlap with
arXiv:1701.0175
The influence of atmosphere on the performance of pure-phase WZ and ZB InAs nanowire transistors
We compare the characteristics of phase-pure MOCVD grown ZB and WZ InAs
nanowire transistors in several atmospheres: air, dry pure N and O, and
N bubbled through liquid HO and alcohols to identify whether
phase-related structural/surface differences affect their response. Both WZ and
ZB give poor gate characteristics in dry state. Adsorption of polar species
reduces off-current by 2-3 orders of magnitude, increases on-off ratio and
significantly reduces sub-threshold slope. The key difference is the greater
sensitivity of WZ to low adsorbate level. We attribute this to facet structure
and its influence on the separation between conduction electrons and surface
adsorption sites. We highlight the important role adsorbed species play in
nanowire device characterisation. WZ is commonly thought superior to ZB in InAs
nanowire transistors. We show this is an artefact of the moderate humidity
found in ambient laboratory conditions: WZ and ZB perform equally poorly in the
dry gas limit yet equally well in the wet gas limit. We also highlight the
vital role density-lowering disorder has in improving gate characteristics, be
it stacking faults in mixed-phase WZ or surface adsorbates in pure-phase
nanowires.Comment: Accepted for publication in Nanotechnolog
A synchronization technique for optical PPM signals
A technique for maintaining synchronization between optical PPM (pulse-position modulation) pulses and a receiver clock by means of a delay-tracking loop is described and analyzed. The tracking loop is driven by a doubly stochastic Poisson process that contains information about the location of the desired slot boundaries. The slot boundaries are subject to slowly varying random delays that are ultimately tracked by the loop. The concept of fractional rms delay error is introduced to quantify the effects of signal and background induced shot noise on the performance of the delay-tracking loop
Improvements on the Stability and Operation of a Magnetron H- Ion Source
The magnetron H- ion sources developed in the 1970s currently in operation at
Fermilab provide beam to the rest of the accelerator complex. A series of
modifications to these sources have been tested in a dedicated offline test
stand with the aim of improving different operational issues. The solenoid type
gas valve was tested as an alternative to the piezoelectric gas valve in order
to avoid its temperature dependence. A new cesium oven was designed and tested
in order to avoid glass pieces that were present with the previous oven,
improve thermal insulation and fine tune its temperature. A current-regulated
arc modulator was developed to run the ion source at a constant arc current,
providing very stable beam outputs during operations. In order to reduce beam
noise, the addition of small amounts of N2 gas was explored, as well as testing
different cathode shapes with increasing plasma volume. This paper summarizes
the studies and modifications done in the source over the last three years with
the aim of improving its stability, reliability and overall performance.Comment: 8 pages, 19 figure
- ā¦