Superconducting phase diagram of NaxCoO2.yH2O

We synthesized Nax(H3O)zCoO2yH2O samples with various Na/H3O ratios but with the constant Co valence of s = +3.40, and measured their magnetic properties to draw phase diagrams of the system. The superconductivity is very sensitive to the Na/H3O ratio. With varying x under fixed s of +3.40, magnetically ordered phase appears in the intermediate range of x sandwiched by two separated superconducting phases, suggesting that the superconductivity is induced by moderately strong magnetic interactions. In the vicinity of the magnetic phase, transition from the superconducting state to the magnetically ordered state was induced by applying high magnetic field. This transition is of the second order, at least, above 1.8 K. The upper-critical field is expected to be much higher than the Pauli limit for a phase located far away from the magnetic phase regarding the Na/H3O ratio.Comment: proceedings of ISS200

Characterization of lignin-derived products from various lignocellulosics as treated by semi-flow hot-compressed water

To elucidate the decomposition behaviors of lignin from different taxonomic groups, five different lignocellulosics were treated with hot-compressed water (230 °C/10 MPa/15 min) to fractionate lignins into water-soluble portions, precipitates, and insoluble residues. The lignin-derived products in each fraction were characterized and compared. The delignification of monocotyledons [nipa palm (Nypa fruticans) frond, rice (Oryza sativa) straw, and corn (Zea mays) cob] was more extensive than that achieved for Japanese cedar (Cryptomeria japonica, gymnosperm) and Japanese beech (Fagus crenata, dicotyledon angiosperm). The water-soluble portions contained lignin monomers like coniferyl alcohol and phenolic acids, while the precipitates contained higher molecular weight lignin with high content of ether-type linkages. Lignin in the insoluble residues was rich in condensed-type structures. In all five lignocellulosics, ether-type linkages were preferentially cleaved, while condensed-type lignin showed resistance to hot-compressed water. In the monocotyledons, lignin–carbohydrate complexes were cleaved and gave lignins that had higher molecular weights than those eluted from the woods. These differences would facilitate the delignification in monocotyledons. Such information provides useful information for efficient utilization of various lignocellulosics

Characterization of three tissue fractions in corn (Zea mays) cob

Corn (Zea mays) cob is composed of three tissue fractions, chaff, woody ring, and pith, with dry weight percentages of 21.1%, 77.5%, and 1.4%, respectively. In this study, the cell wall components in these tissue fractions were characterized to examine their tissue morphology. The chemical compositions in the three fractions were relatively similar, and hemicellulose was the main component. Through sugar composition analysis, hemicellulose was mainly composed of xylan in all fractions, whereas the proportion of arabinose and galactose was different in the woody ring. From the alkaline nitrobenzene oxidation analysis, lignin in all fractions was composed of guaiacyl, syringyl, and p-hydroxyphenyl lignins, whereas their ratios varied in the three fractions. Furthermore, the amounts of cinnamic acids such as ferulic and p-coumaric acids, which are associated with corn lignin, were also different among the three fractions. With respect to the tissue morphology, the component cells in the three fractions were totally different each other. Furthermore, from the ultraviolet microspectrophotometry of each morphological region in the three tissue fractions, lignin concentration and distribution of cinnamic acids were different from one morphological region to another. The differences in chemical composition and lignin structures influence the decomposition behaviors in various treatments; thus, this information provides a clue to promote efficient utilization of corn cob into value-added chemicals

Influence of Proteins on the Lignin Decomposition Behavior of Japanese Cedar (Cryptomeria japonica) Wood by Supercritical Methanol Treatment

The effect of adding protein on the decomposition behavior of lignin in Japanese cedar under supercritical methanol conditions (270 °C/27 MPa) was studied. The Klason method was used to detect the lignin content in the insoluble residue following to a 30 min treatment. Adding either an animal (bovine serum albumin) or plant (soy) protein enhanced delignification from 50 to 65% of the lignin-based wt %. This result was attributed to enhanced lignin depolymerization owing to inhibited lignin recondensation and/or the suppressed formation of polysaccharide-derived char via reactions between the protein and polysaccharides. Although the solubilization of lignin was promoted and the yield of lignin-derived low-molecular-weight compounds increased, the selectivity of major monomers such as coniferyl alcohol (CA) and γ-methylated CA decreased. The addition of proteins has a substantial impact on the decomposition behavior of cell wall components under supercritical methanol conditions. This information provides insights into the use of protein-rich lignocelluloses

Valence and Na content dependences of superconductivity in NaxCoO2.yH2O

Various samples of sodium cobalt oxyhydrate with relatively large amounts of Na$^{+}$ ions were synthesized by a modified soft-chemical process in which a NaOH aqueous solution was added in the final step of the procedure. From these samples, a superconducting phase diagram was determined for a section of a cobalt valence of $\sim$+3.48, which was compared with a previously obtained one of $\sim$+3.40. The superconductivity was significantly affected by the isovalent exchanger of Na$^{+}$ and H$_{3}$O$^{+}$, rather than by variation of Co valence, suggesting the presence of multiple kinds of Fermi surface. Furthermore, the high-field magnetic susceptibility measurements for one sample up to 30 T indicated an upper critical field much higher than the Pauli limit supporting the validity of the spin-triplet pairing mechanism.Comment: 4 figures and 1 tabl

THE FRICTIONAL COEFFICIENTS IN TI-NB ALLOY

Objectives: To determine the frictional force (FF) of the novel, elastic, bendable titanium-niobium (Ti-Nb) alloy orthodontic wire in stainless steel (SS) brackets and to compare it with those of titanium-nickel (Ti-Ni) and titanium-molybdenum (Ti-Mo) alloy wires. Materials and Methods: Three sizes of Ti-Nb, Ti-Ni, and Ti-Mo alloy wires were ligated with elastic modules to 0.018-inch and 0.022-inch SS brackets. The dynamic FFs between the orthodontic wires and SS brackets were measured at three bracket-wire angles (0゜, 5゜, and 10゜) with an Instron 5567 loading apparatus (Canton, Mass). Results: FFs increased gradually with the angle and wire size. In the 0.018-inch-slot bracket, the dynamic FFs of Ti-Nb and Ti-Ni alloy wires were almost the same, and those of the Ti-Mo alloy wire were significantly greater (P<0.05). FF values were 1.5–2 times greater in the 0.022-inch-slot bracket than in the 0.018-inch-slot bracket, regardless of alloy wire type, and the Ti-Mo alloy wire showed the greatest FF. Scanning electric microscopic images showed that the surface of the Ti-Mo alloy wire was much rougher than that of the Ti-Ni and Ti-Nb alloy wires. Conclusion: These findings demonstrate that the Ti-Nb alloy wire has almost the same frictional resistance as the Ti-Ni alloy wire, although it has a higher elastic modulus

Korean-Japanese Planet Search Program: Substellar Companions around Intermediate-Mass Giants

A Korean-Japanese planet search program has been carried out using the 1.8m telescope at Bohyunsan Optical Astronomy Observatory (BOAO) in Korea, and the 1.88m telescope at Okayama Astrophysical Observatory (OAO) in Japan to search for planets around intermediate-mass giant stars. The program aims to show the properties of planetary systems around such stars by precise Doppler survey of about 190 G or K type giants together with collaborative surveys of the East-Asian Planet Search Network. So far, we detected two substellar companions around massive intermediate-mass giants in the Korean-Japanese planet search program. One is a brown dwarf-mass companion with 37.6 $M_{\mathrm{J}}$ orbiting a giant HD 119445 with 3.9 $M_{\odot}$, which is the most massive brown dwarf companion among those found around intermediate-mass giants. The other is a planetary companion with 1.8 $M_{\mathrm{J}}$ orbiting a giant star with 2.4 $M_{\odot}$, which is the lowest-mass planetary companion among those detected around giant stars with $>$ 1.9 $M_{\odot}$. Plotting these systems on companion mass vs. stellar mass diagram, there seem to exist two unpopulated regions of substellar companions around giants with 1.5--3 $M_{\odot}$ and planetary companions orbiting giants with 2.4--4 $M_{\odot}$. The existence of these possible unpopulated regions supports a current characteristic view that more massive substellar companions tend to exist around more massive stars.Comment: 8 pages, 3 figures, Part of PlanetsbeyondMS/2010 proceedings http://arxiv.org/html/1011.660

A Planetary Companion to the Intermediate-Mass Giant HD 100655

A precise radial velocity survey conducted by a Korean-Japanese planet search program revealed a planetary companion around the intermediate-mass clump giant HD 100655. The radial velocity of the star exhibits a periodic Keplerian variation with a period, semi-amplitude and eccentricity of 157.57 d, 35.2 m s^-1 and 0.085, respectively. Adopting an estimated stellar mass of 2.4 M_Sun, we confirmed the presence of a planetary companion with a semi-major axis of 0.76 AU and a minimum mass of 1.7 M_Jup. The planet is the lowest-mass planet yet discovered around clump giants with masses greater than 1.9 M_Sun.Comment: 17 pages, 8 figures, accepted for publication in PAS