26 research outputs found
Elastik sabitlerden kaynama sıcaklığının belirlenmesi
33 cubic and 11 hexagonal materials were selected to determine the boiling temperature of the
materials by regression analysis. The boiling temperatures of these selected materials were estimated
by regression analysis using the elastic constant and boiling temperature information in the literature.
Variance and regression analyze were performed with MINITAB 17 software in 95% confidence
interval. Regression coefficients were calculated with 98.9% determination coefficient. As a result of
regression analysis, an empirical relationship between the elastic constants and the boiling
temperature was obtained which predicts boiling temperatures for some cubic and hexagonal
materials. The boiling temperatures calculated with the help of these relationships were compared
with the literature data.Regresyon analizi ile malzemelerin kaynama sıcaklığını belirlemek için 33 kübik ve 11 hekzagonal
malzeme seçilmiştir. Bu seçilen malzemelerin kaynama sıcaklıkları, literatürdeki elastik sabit ve kaynama
sıcaklığı bilgileri kullanılarak regresyon analizi ile tahmin edilmiştir. MINITAB 17 yazılımı ile %95 güven
aralığında varyans ve regresyon analizi yapılmıştır. Regresyon katsayıları %98,9 tespit katsayısı ile
hesaplanmıştır. Regresyon analizi sonucunda, elastik sabitler ile kaynama sıcaklığı arasında ampirik ilişki
elde edilmiş ve bazı kübik ve hekzagonal malzemeler için kaynama sıcaklıkları öngörülmüştür. Bu
ilişkilerin yardımıyla hesaplanan kaynama sıcaklıkları literatür verileri ile karşılaştırıld
DOZIMETERS IN BUSINESS SAFETY
All living creatures living on the earth have been exposed to
radiation and intertwined with radiation throughout their entire lives. As long as there are radiation sources, it will not be possible to avoid it. The purpose of this article is to provide interaction in the sense that health and industry employees are a ware of the use of personal dosimeters by ionizing radiation emitting devices or
radioactive substances and that they are able to maintain healthy working and working conditions effectively. For radiation workers, the effective dose is limited to 20 mSv for five years.
However, it has been accepted that employees should not exceed 50 mSv of effective dose in a single year. The annual equivalent dose limit for hand-foot or skin was set at 500 mSv, while for the eyelid the dose was limited to 150 mSv. It is possible to read radiation doses directly from the receiving device, electronic dosimeters and pocket (pen) dosimeters. In this study, detailed information was given about the dosimeters. It is important to know the level of radiation emitted from such
devices in order to be able to be protected from radiation emitted by a radioactive source or X-ray. The only way to find out is to identify the dosimetry systems of the users and to know the characteristics that will affect the measurement results, it is very important to determine the correctness of the doses
İmin grupları taşıyan fenoksi sübstitüe siklotrifosfazen türevleri ile ağır metal iyonları giderimi
Hexa [4-(4-hydroxy-phenyliminomethyl) phenoxy] cyclotriphosphazene (A1) and Hexa [4-(2- hydroxyphenyliminomethyl) phenoxy] cyclotriphosphazene (A2) were derived from the reactions of hexa(4-
formyl-phenoxy)cyclotriphosphazene and hexa(2-formyl-phenoxy)cyclotriphosphazene with 4-
aminophenol and 2-aminophenol. Adsorption process in an aqueous solution of Cu, Fe, Mn and Zn ions
of the organophosphazenes bearing imine groups were performed depending on the initial
concentration of metal ions and time. All of the compounds adsorbed the selected metal ions in the
first 10 minutes. When the initial concentration of metal ions increases, the amount of metal ions
adsorbed of organophosphazene with imine groups increased. Although the chemical structures of the
compounds are different, the amount of adsorbed metal was about the same.Hekza[4-{(4-hidroksi-fenilimino)metil}fenoksi]siklotrifosfazenin(A1) ve hekza[4-{(2-hidroksifenilimino)metil}fenoksi]siklotrifosfazenin(A2), 4-aminofenol ve 2-aminofenol ile heksa (4-formilfenoksi) siklotriposfazen ve heksa (2-formil-fenoksi) siklotriposfazen reaksiyonlarından türetildi. İmin
gruplarını taşıyan organofosfazelerin sulu Cu, Fe, Mn ve Zn iyonları çözeltisinde adsorpsiyon işlemi,
metal iyonlarının başlangıç konsantrasyonuna ve süresine bağlı olarak gerçekleştirildi. Bileşiklerin tümü
seçilen metal iyonlarını ilk 10 dakika içerisinde adsorbe etti. Metal iyonlarının başlangıç konsantrasyonu
arttığında, imin gruplarıyla organofosfazene adsorbe edilen metal iyonlarının miktarı arttı. Bileşiklerin
kimyasal yapıları farklı olmasına rağmen, adsorbe edilen metal miktarı yaklaşık olarak aynıydı
Investigation of mechanical, elastic and thermodynamic properties of Ni2VAl compound
Bu çalışmada teknolojik öneme haiz Heusler ailesinden Ni2VAl bileşiğinin yapısal, mekanik ve termo
dinamik özellikleri ilk prensipler yöntemi ile teorik olarak incelenmiştir. Öncelikle bileşiğin temel
durumunu ve en düşük enerji seviyesini belirlemek için yapısal optimizasyon yapılmış, yapısal
optimizasyon neticesinde elde edilen optimize parametreler kullanılarak elastik sabitler hesaplanmıştır.
Hesaplanan örgü parametresi önceki çalışmalar ile uyum içeresindedir. Ayrıca belirlenen elastik sabitler
mekanik kararlılık kriterlerini karşıladığından elastik modül, Vicker sertliği, erime sıcaklığı, Debye
sıcaklığı, ses hızları, minimum termal iletkenlik ve anizotropi incelenmiştir. Çalışılan malzemenin Vicker
sertliği ve sünek/kırılgan doğası analiz edilmiştir. Ayrıca iç enerji, titreşim enerjisi, entropi ve özgül ısı
kapasitesi 0-800 K sıcaklık aralığında değerlendirilmiştir. Hesaplamalarda açık kaynak Quantum
Espresso yazılımı ve bu yazılım ile dağıtımı yapılan thermo_pw paketi tercih edilmiştir. Yapılan çalışma
ile Ni2VAl bileşiğinin mekanik kararlı, sünek, anizotrop ve yumuşak olduğu görüldü.In this study, the structural, mechanical, and thermodynamic properties of Ni2VAl compound from
Heusler family, which has technological importance, were investigated theoretically by first principles
method. Firstly, structural optimization was performed to determine the ground state and lowest
energy level of the compound, and elastic constants were calculated using the optimized parameters
obtained as a result of structural optimization. The calculated lattice parameter agrees with previous
studies. In addition, elastic modulus, Vicker hardness, melting temperature, Debye temperature, sound
velocities, minimum thermal conductivity and anisotropy were investigated since the determined
elastic constants meet the mechanical stability criteria. The Vicker hardness and ductile/brittle nature
of the studied material were analyzed. In addition, internal energy, vibrational energy, entropy, and
specific heat capacity were evaluated in the temperature range of 0-800 K. In calculations, open-source
Quantum Espresso software and thermo_pw package distributed with this software were preferred.
With the study, it was seen that the Ni2VAl compound was mechanically stable, ductile, anisotropic,
and soft
Investigation of Mechanical Properties of SnO2 Crystals in CaCl2 Type Structure
Mekanik özellikler malzeme bilimi ve teknolojisinde kilit rol oynamaktadır. Mekanik özellikler, değişik
basınç altında yoğunluk fonksiyonel teorisine dayanan ab-initio yöntemi ile genelleştirilmiş gradyent
yaklaşımı (GGA) kullanılarak hesaplanmıştır. CaCl2
fazındaki SnO2
’nin yapısal parametreleri belirlendi.
Bağımsız elastik kat sayıları ve bulk modülü, Debye sıcaklığı gibi ilgili polikristal nicelikler Voight -ReussHill
yaklaşımları kullanılarak hesaplandı. Ortam basıncında Debye sıcaklığı ve x, y ve z yönlerinde
ortalama lineer sıkıştırılabilirlik sırasıyla 487,1K ve 1,89 TPa-1 olarak bulundu. Ayrıca, farklı basınçlarda
örgü parametreleri ve elastik sabitler üzerinde regresyon analizi yapıldı ve basınca bağlı olarak
regresyon eşitlikleri önerildi. Elde edilen sonuçlar önceki hesaplamalar ve mevcut deneysel verilerle
karşılaştırılmıştır.Mechanical properties play a key role in materials science and technology. The mechanical properties
have been computed using the generalized gradient approximation (GGA) with ab-initio method based
on density functional theory (DFT) under various pressures. Structural parameters of SnO2
in CaCl2
-
type phase were determined. Independent elastic coefficients and related polycrystalline quantities
such as bulk modulus, Debye temperature were calculated using the Voight -Reuss – Hill approximation.
The Debye temperature and average linear compressibility in the x, y and z direction at ambient
pressure were found to be 487.1 K and 1.89 TPa-1
, respectively. In addition, regression analysis was
performed on the lattice parameters and elastic constants at different pressures and the regression
equations were suggested depending on the pressure. The obtained results are compared with the
previous calculations and available experimental data
Investigation of structural, dynamic and thermodynamic properties of SbXI (X = S, Se, Te) compounds with ab initio method.
TEZ10791Tez (Doktora) -- Çukurova Üniversitesi, Adana, 2016.Kaynakça (s. 127-136) var.xii, 148 s. : res. (bzs. rnk.), tablo ; 29 cm.Bu çalışmada, ortoromb k SbX(= S, Se, Te)I b leş kler n n yapısal, elektron k, elast k, Born etk n yükler , d elektr k, termod nam k, t treş m özell kler LDA ve GGA yaklaşımı kullanılarak ab n t o yöntem ne dayalı yoğunluk fonks yonel teor s le hesaplandı. Enerj bant yapısı, SbXI b leş kler n dolaylı b r bant aralığına sah p olduğunu göstermekted r. SbXI b leş kler n n elektron k yük dağılımı Sb-X ve Sb-I bağlarının kovalent- yon k türü olduğunu göstermekted r. Born etk n yükler , d elektr k geç rgenl k tensörü ve elast k özell kler yoğunluk fonks yonel pertürbasyon teor s çerçeves nde hesaplandı. Hesaplanan bağımsız elast k sab tler SbXI b leş ğ n n mekan k olarak kararlı olduğunu göstermekted r. Bu b leş kler n bulk modülü, kayma modülü, Young modülü, ses hızı, Po sson oranı, kr stal an zotrop ve Debye sıcaklıkları g b bazı temel f z ksel büyüklükler hesaplanan ver lerden elde ed lm şt r. SbXI’nın fonon durum yoğunluğu ve fonon d spers yon eğr ler hesaplanan Hellmann-Feynman güçler ne dayalı d rekt yöntem kullanılarak elde ed ld . ? noktasında kızılötes ve Raman’da akt f fonon k p frekansları bulundu. Ayrıca, SbXI kr staller n Helmholtz serbest enerj s , ç enerj , ısı kapas tes ve entrop g b termod nam k özell kler harmon k yaklaşımı kullanılarak ncelenm şt r. Elde ed len bulgular mevcut deneysel ve teor k değerlerle karşılaştırıldı.In this work, the structural, electronic, elastic, Born effective charges, dielectrics, thermodynamic, vibrational properties of orthorhombic SbX(= S, Se, Te)I compounds were calculated using the LDA and GGA approximation with density functional theory based on ab initio method. Energy band structures show that SbXI compounds have an indirect band gap. Electronic charge distributions of SbXI compounds suggest that the Sb–X and Sb–I bonds are covalent–ionic type. Born effective charges, dielectric permittivity tensors and elastic properties have been calculated within the framework of density functional perturbation theory. The calculated independent elastic constants indicate that SbXI compounds are mechanically stable. Some fundamental physical quantities such as bulk modulus, shear modulus, sound velocity, Young's modulus, Poisson's ratio, crystal anisotropy and Debye temperatures of these compounds were derived from computed data. The density of phonon states and phonon dispersion curves of SbXI were obtained using the direct method based on computed Hellmann–Feynman forces. The infrared and Raman active phonon mode frequencies at the ? point are found. The thermodynamic properties of SbXI crystals such as the Helmholtz free energy, internal energy, heat capacity and entropy are also investigated using the harmonic approximation. The obtained results were compared with the existing experimental and other theoretical data.Bu çalışma Ç.Ü. Bilimsel Araştırma Projeleri Birimi tarafından desteklenmiştir. Proje No:
Study of First Principles on Anisotropy and Elastic Constants of YAl3 Compound
Using the Density Functional Theory (DFT) calculations, the structural optimization of the YAl3 compound was performed on the Generalized Gradient Approximation (GGA) approximation with Quantum ESPRESSO (QE) software. Elastic constants were calculated after the optimization process. Polycrystalline quantities such as bulk and shear modulus, Young’s modulus, and Poisson’s ratio were determined using calculated elastic constants. The anisotropy of the compound has been studied in detail. As a result of the calculations made, it was observed that the YAl3 compound exhibited mechanically stable structure and anisotropic behavior. In the ht2-YAl3 phase, the effect of pressure on physical properties was investigated in detail. The obtained results were compared with the existing experimental and other theoretical data.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author
Investigation of the Optical Properties of SbSI Crystalline in the Paraelectric and the Ferroelectric Phase
SbSI kristalinin optik özellikleri yoğunluk fonksiyoneli teorisi altında SIESTA yazılımı ile araştırıldı.
Genelleştirilmiş gradiyent yaklaşıklığı(GGA)’nda psödo‐potansiyel yöntem kullanıldı. Her iki fazda bazı
optik katsayılar hesaplandı. Dielektrik fonksiyonun reel ve sanal kısımlarından; kırılma indisi, yansıma ve
soğurma katsayıları gibi optik katsayılar hesaplanabilir. Hesaplanan değerler ulaşılabilen literatür
değerleri ile kıyaslandı.Under density functional theory with SIESTA software of the SbSI crystal optical properties ware
investigated. SbSI crystalline in paraelectric and ferroelectric phases, the generalized gradient
approximation (GGA) using the pseudo‐potential method. Some optical coefficients in the both phases
ware calculated. The optical constants such as refractive index, reflection, and absorption coefficient
are derived from the computed real and imaginary parts of the dielectric function. The calculated values
were compared with available experimental and theoretical results
Osmaniye’de Yetişen Yer Fıstığının Radyasyon Aktivitesinin İncelenmesi
Son zamanlarda birçok ülkede çevresel örneklerdeki (toprak, su, gıda vs.) radyonüklit miktarı hakkında araştırmalar yapılmıştır. Bu çalışmanın amacı, HPGe detektörlü yüksek çözünürlüklü gama spektrometresi kullanılarak Osmaniye ili ve çevresindeki farklı yerlerden toplanan yer fıstığı örneklerinde Karasal;(Ra-226, Th-232 ve K-40) ve antropojenik (Cs-137) radyonüklitlerin aktivite konsantrasyonu ölçmektir. Fıstık örneklerindeki Ra-226, Th-232 ve K-40 aktivite konsantrasyonları(Bq/Kg) sırasıyla, 3.1±1.0’den, 7.6±1.0’e, 3.2±1.0’den 6.6±1.8’e, 256±2.9’den 304.5±7.2’ye arasında değişmektedir. Cs-137 aktivite konsantrasyonu MDA değerinin altında kalmıştır