249 research outputs found

    A Survey of Laboratory and Statistical Issues Related to Farmworker Exposure Studies

    Get PDF
    Developing internally valid, and perhaps generalizable, farmworker exposure studies is a complex process that involves many statistical and laboratory considerations. Statistics are an integral component of each study beginning with the design stage and continuing to the final data analysis and interpretation. Similarly, data quality plays a significant role in the overall value of the study. Data quality can be derived from several experimental parameters including statistical design of the study and quality of environmental and biological analytical measurements. We discuss statistical and analytic issues that should be addressed in every farmworker study. These issues include study design and sample size determination, analytical methods and quality control and assurance, treatment of missing data or data below the method’s limits of detection, and post-hoc analyses of data from multiple studies

    Ecological Modeling of Aedes aegypti (L.) Pupal Production in Rural Kamphaeng Phet, Thailand

    Get PDF
    Background - Aedes aegypti (L.) is the primary vector of dengue, the most important arboviral infection globally. Until an effective vaccine is licensed and rigorously administered, Ae. aegypti control remains the principal tool in preventing and curtailing dengue transmission. Accurate predictions of vector populations are required to assess control methods and develop effective population reduction strategies. Ae. aegypti develops primarily in artificial water holding containers. Release recapture studies indicate that most adult Ae. aegypti do not disperse over long distances. We expect, therefore, that containers in an area of high development site density are more likely to be oviposition sites and to be more frequently used as oviposition sites than containers that are relatively isolated from other development sites. After accounting for individual container characteristics, containers more frequently used as oviposition sites are likely to produce adult mosquitoes consistently and at a higher rate. To this point, most studies of Ae. aegypti populations ignore the spatial density of larval development sites. Methodology - Pupal surveys were carried out from 2004 to 2007 in rural Kamphaeng Phet, Thailand. In total, 84,840 samples of water holding containers were used to estimate model parameters. Regression modeling was used to assess the effect of larval development site density, access to piped water, and seasonal variation on container productivity. A varying-coefficients model was employed to account for the large differences in productivity between container types. A two-part modeling structure, called a hurdle model, accounts for the large number of zeroes and overdispersion present in pupal population counts. Findings - The number of suitable larval development sites and their density in the environment were the primary determinants of the distribution and abundance of Ae. aegypti pupae. The productivity of most container types increased significantly as habitat density increased. An ecological approach, accounting for development site density, is appropriate for predicting Ae. aegypti population levels and developing efficient vector control program

    ‘Trendy’ cities: exploring the adoption of different types of social media by Portuguese municipalities

    Get PDF
    What are the determinants of social media adoption by local government? This ongoing research provides a tentative answer to this question by analysing the 308 municipalities in Portugal. Extending previous analyses of Facebook and/or Twitter usage levels, we examine why local governments adopt a particular social media platform. More concretely, we explore, with statistical analyses, the determinants of the adoption of different types of social media. We investigate the adoption of three extremely popular social media (i.e. Facebook, Twitter and YouTube) as well as possible alternatives to those, more popular, applications. Since these platforms have distinct natures and can serve diverse purposes, we examine to what extent aspects such as local government’s commitment to transparency and participation, administrative capacity, media landscape, and socio-demographic and economic factors can explain the adoption of certain social media platforms. The results show that, indeed, demographic characteristics and administrative capacity are important factors for the adoption of less popular social media. Surprisingly, we also observe a geographical difference in municipalities’ social media adoption, with the south, in this regard, being ‘trendier’, or more innovative, than the north.This paper is a result of the project “SmartEGOV: Harnessing EGOV for Smart Governance (Foundations, methods, Tools)/NORTE-01-0145-FEDER-000037”, supported by Norte Portugal Regional Operational Programme (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (EFDR). António Tavares acknowledges the financial support of the Portuguese Foundation for Science and Technology and the Portuguese Ministry of Education and Science through national funds [Grant No. UID/CPO/0758/2019]

    Sins of Omission

    Full text link
    Little is known about the relative incidence of serious errors of omission versus errors of commission. Objective : To identify the most common substantive medical errors identified by medical record review. Design : Retrospective cohort study. Setting : Twelve Veterans Affairs health care systems in 2 regions. Participants : Stratified random sample of 621 patients receiving care over a 2-year period. Main Outcome Measure : Classification of reported quality problems. Methods : Trained physicians reviewed the full inpatient and outpatient record and described quality problems, which were then classified as errors of omission versus commission. Results : Eighty-two percent of patients had at least 1 error reported over a 13-month period. The average number of errors reported per case was 4.7 (95% confidence intervals [CI]: 4.4, 5.0). Overall, 95.7% (95% CI: 94.9%, 96.4%) of errors were identified as being problems with underuse. Inadequate care for people with chronic illnesses was particularly common. Among errors of omission, obtaining insufficient information from histories and physicals (25.3%), inadequacies in diagnostic testing (33.9%), and patients not receiving needed medications (20.7%) were all common. Out of the 2,917 errors identified, only 27 were rated as being highly serious, and 26 (96%) of these were errors of omission. Conclusions : While preventing iatrogenic injury resulting from medical errors is a critically important part of quality improvement, we found that the overwhelming majority of substantive medical errors identifiable from the medical record were related to people getting too little medical care, especially for those with chronic medical conditions.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/74567/1/j.1525-1497.2005.0152.x.pd

    Localizing triplet periodicity in DNA and cDNA sequences

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>The protein-coding regions (coding exons) of a DNA sequence exhibit a triplet periodicity (TP) due to fact that coding exons contain a series of three nucleotide codons that encode specific amino acid residues. Such periodicity is usually not observed in introns and intergenic regions. If a DNA sequence is divided into small segments and a Fourier Transform is applied on each segment, a strong peak at frequency 1/3 is typically observed in the Fourier spectrum of coding segments, but not in non-coding regions. This property has been used in identifying the locations of protein-coding genes in unannotated sequence. The method is fast and requires no training. However, the need to compute the Fourier Transform across a segment (window) of arbitrary size affects the accuracy with which one can localize TP boundaries. Here, we report a technique that provides higher-resolution identification of these boundaries, and use the technique to explore the biological correlates of TP regions in the genome of the model organism <it>C. elegans</it>.</p> <p>Results</p> <p>Using both simulated TP signals and the real <it>C. elegans </it>sequence F56F11 as an example, we demonstrate that, (1) Modified Wavelet Transform (MWT) can better define the boundary of TP region than the conventional Short Time Fourier Transform (STFT); (2) The scale parameter (a) of MWT determines the precision of TP boundary localization: bigger values of a give sharper TP boundaries but result in a lower signal to noise ratio; (3) RNA splicing sites have weaker TP signals than coding region; (4) TP signals in coding region can be destroyed or recovered by frame-shift mutations; (5) 6 bp periodicities in introns and intergenic region can generate false positive signals and it can be removed with 6 bp MWT.</p> <p>Conclusions</p> <p>MWT can provide more precise TP boundaries than STFT and the boundaries can be further refined by bigger scale MWT. Subtraction of 6 bp periodicity signals reduces the number of false positives. Experimentally-introduced frame-shift mutations help recover TP signal that have been lost by possible ancient frame-shifts. More importantly, TP signal has the potential to be used to detect the splice junctions in fully spliced mRNA sequence.</p

    Interpretation of multiple probe sets mapping to the same gene in Affymetrix GeneChips

    Get PDF
    BACKGROUND: Affymetrix GeneChip technology enables the parallel observations of tens of thousands of genes. It is important that the probe set annotations are reliable so that biological inferences can be made about genes which undergo differential expression. Probe sets representing the same gene might be expected to show similar fold changes/z-scores, however this is in fact not the case. RESULTS: We have made a case study of the mouse Surf4, chosen because it is a gene that was reported to be represented by the same eight probe sets on the MOE430A array by both Affymetrix and Bioconductor in early 2004. Only five of the probe sets actually detect Surf4 transcripts. Two of the probe sets detect splice variants of Surf2. We have also studied the expression changes of the eight probe sets in a public-domain microarray experiment. The transcripts for Surf4 are correlated in time, and similarly the transcripts for Surf2 are also correlated in time. However, the transcripts for Surf4 and Surf2 are not correlated. This proof of principle shows that observations of expression can be used to confirm, or otherwise, annotation discrepancies. We have also investigated groups of probe sets on the RAE230A array that are assigned to the same LocusID, but which show large variances in differential expression in any one of three different experiments on rat. The probe set groups with high variances are found to represent cases of alternative splicing, use of alternative poly(A) signals, or incorrect annotations. CONCLUSION: Our results indicate that some probe sets should not be considered as unique measures of transcription, because the individual probes map to more than one transcript dependent upon the biological condition. Our results highlight the need for care when assessing whether groups of probe sets all measure the same transcript

    Linkage mapping bovine EST-based SNP

    Get PDF
    BACKGROUND: Existing linkage maps of the bovine genome primarily contain anonymous microsatellite markers. These maps have proved valuable for mapping quantitative trait loci (QTL) to broad regions of the genome, but more closely spaced markers are needed to fine-map QTL, and markers associated with genes and annotated sequence are needed to identify genes and sequence variation that may explain QTL. RESULTS: Bovine expressed sequence tag (EST) and bacterial artificial chromosome (BAC)sequence data were used to develop 918 single nucleotide polymorphism (SNP) markers to map genes on the bovine linkage map. DNA of sires from the MARC reference population was used to detect SNPs, and progeny and mates of heterozygous sires were genotyped. Chromosome assignments for 861 SNPs were determined by twopoint analysis, and positions for 735 SNPs were established by multipoint analyses. Linkage maps of bovine autosomes with these SNPs represent 4585 markers in 2475 positions spanning 3058 cM . Markers include 3612 microsatellites, 913 SNPs and 60 other markers. Mean separation between marker positions is 1.2 cM. New SNP markers appear in 511 positions, with mean separation of 4.7 cM. Multi-allelic markers, mostly microsatellites, had a mean (maximum) of 216 (366) informative meioses, and a mean 3-lod confidence interval of 3.6 cM Bi-allelic markers, including SNP and other marker types, had a mean (maximum) of 55 (191) informative meioses, and were placed within a mean 8.5 cM 3-lod confidence interval. Homologous human sequences were identified for 1159 markers, including 582 newly developed and mapped SNP. CONCLUSION: Addition of these EST- and BAC-based SNPs to the bovine linkage map not only increases marker density, but provides connections to gene-rich physical maps, including annotated human sequence. The map provides a resource for fine-mapping quantitative trait loci and identification of positional candidate genes, and can be integrated with other data to guide and refine assembly of bovine genome sequence. Even after the bovine genome is completely sequenced, the map will continue to be a useful tool to link observable phenotypes and animal genotypes to underlying genes and molecular mechanisms influencing economically important beef and dairy traits

    Stable Isotope Analysis Can Potentially Identify Completely-Digested Bloodmeals in Mosquitoes

    Get PDF
    Background: Vertebrate bloodfeeding is a critical component of a mosquito’s ability to transmit pathogens that cause diseases such as malaria, dengue fever and viral encephalitis. Due to degradation by the digestive process, current methods to identify mosquito bloodmeal sources are only useful for approximately 36 hours post-feeding. A critical need exists for technologies to extend this window and gain a more complete picture of mosquito feeding behavior for epidemiological studies. Stable isotopes are useful for investigating organism feeding behavior because the isotopic ratio of an organism’s tissues reflects that of the material it ingests. Methodology/Principal Findings: Proof-of-principle data indicates that after bloodfeeding, Aedes albopictus mosquitoes acquire diagnostic Carbon and Nitrogen stable isotope profiles from their vertebrate hosts that can be accurately identified one week post-feeding, approximately 4 days after the entire bloodmeal has been digested. Total C/N ratio served as a biomarker marker for bloodfeeding (P,0.02), while dN was the most informative variable which could distinguish between unfed, chicken-fed and human-fed mosquitoes (P,0.01). By plotting C/N vs. dN, all feeding treatments could be identified in a double-blind analysis. Conclusions/Significance: These proof-of-principle experiments indicate that analysis of stable isotopes can be used to distinguish bloodfed from unfed mosquitoes, and also distinguish between different vertebrate bloodmeal sources eve

    Genomic and gene expression profiling of minute alterations of chromosome arm 1p in small-cell lung carcinoma cells

    Get PDF
    Genetic alterations occurring on human chromosome arm 1p are common in many types of cancer including lung, breast, neuroblastoma, pheochromocytoma, and colorectal. The identification of tumour suppressors and oncogenes on this arm has been limited by the low resolution of current technologies for fine mapping. In order to identify genetic alterations on 1p in small-cell lung carcinoma, we developed a new resource for fine mapping segmental DNA copy number alterations. We have constructed an array of 642 ordered and fingerprint-verified bacterial artificial chromosome clones spanning the 120 megabase (Mb) 1p arm from 1p11.2 to p36.33. The 1p arm of 15 small-cell lung cancer cell lines was analysed at sub-Mb resolution using this arm-specific array. Among the genetic alterations identified, two regions of recurrent amplification emerged. They were detected in at least 45% of the samples: a 580 kb region at 1p34.2–p34.3 and a 270 kb region at 1p11.2. We further defined the potential importance of these genomic amplifications by analysing the RNA expression of the genes in these regions with Affymetrix oligonucleotide arrays and semiquantitative reverse transcriptase–polymerase chain reaction. Our data revealed overexpression of the genes HEYL, HPCAL4, BMP8, IPT, and RLF, coinciding with genomic amplification

    Economic Impacts of Non-Native Forest Insects in the Continental United States

    Get PDF
    Reliable estimates of the impacts and costs of biological invasions are critical to developing credible management, trade and regulatory policies. Worldwide, forests and urban trees provide important ecosystem services as well as economic and social benefits, but are threatened by non-native insects. More than 450 non-native forest insects are established in the United States but estimates of broad-scale economic impacts associated with these species are largely unavailable. We developed a novel modeling approach that maximizes the use of available data, accounts for multiple sources of uncertainty, and provides cost estimates for three major feeding guilds of non-native forest insects. For each guild, we calculated the economic damages for five cost categories and we estimated the probability of future introductions of damaging pests. We found that costs are largely borne by homeowners and municipal governments. Wood- and phloem-boring insects are anticipated to cause the largest economic impacts by annually inducing nearly 1.7billioninlocalgovernmentexpendituresandapproximately1.7 billion in local government expenditures and approximately 830 million in lost residential property values. Given observations of new species, there is a 32% chance that another highly destructive borer species will invade the U.S. in the next 10 years. Our damage estimates provide a crucial but previously missing component of cost-benefit analyses to evaluate policies and management options intended to reduce species introductions. The modeling approach we developed is highly flexible and could be similarly employed to estimate damages in other countries or natural resource sectors
    corecore