ANALISIS FAKTOR PENYEBAB KESULITAN BELAJAR SISWA KELAS VIII MATA PELAJARAN IPA TERPADU MTS JAUHARUL IMAN SENAUNG MUARO JAMB

Berdasarkan penelitian yang telah dilakukan pada tanggal 24 juni 2019 ditemukan masih banyak kendala yang di hadapi oleh para siswa, yaitu masalah kesulitan belajar. Penelitian ini bertempat di Mts Jauharul Iman. Populasi yang digunakan dalam penelitian ini sebanyak 2 kelas. Subjek penelitian adalah siswa kelas VIII A dan B Penelitian ini bertujuan untuk mengetahui faktor internal yang menyebabkan kesulitan belajar siswa dalam mata pelajaran IPA Mts Jauharul Iman meliputi Motivasi, Minat, Sikap. Sedangkan faktor eksternal yang menyebabkan kesulitan belajar siswa dalam mata pelajaran IPA meliputi Lingkungan sekolah, lingkungan keluarga. Teknik analisis data menggunakan angket dengan skala likert

PENGARUH PENGGUNAAN METODE PEMBELAJARAN INKUIRI TERBIMBING TERHADAP MOTIVASI BELAJAR BIOLOGI SISWA SMA N 4 TEBO

Skripsi ini membahas tentang pengaruh penggunaan metode pembelajaran Inkuiri Terbimbing terhadap motivasi belajar Biologi siswa SMA N 4 tebo. Penelitian ini merupakan penelitian kuantitatif dengan menggunakan desain quasi experimental design-posttest only control design. Instrument yang digunakan adalah angket dan lembar pengamatanyang telah di validasi. Berdasarkan hasil pengumpulan data uji “t” dengan hasil yang diperoleh 4,52 lebih besar dari ttebel dari taraf signifikan 5% = 2,01 dan taraf signifikan 1% = 2,68, maka H0ditolak dan Hadi terima, dan menggunakan rumus effect size. Dari hasil perhitungan diperoleh besarnya effect sizeperlakuan yang diberikan adalah 0.89 atau 79%. Artinya terdapat pengaruh yang signifikan metode pembelajaran Inkuiri Terbimbingterhadap motivasi belajar Biologi siswa SMA N 4 tebo. Berdasarkan hasil observasi diketahui pada kelas eksperimen terdapat 79,16% motivasi belajar siswa baik, sedangkan pada kelas control diketahui 21,74% motivasi belajar siswa kurang. Hasil penelitian ini dapat di simpulkan bahwa terdapat pengaruh penggunaan metode pembelajaran Inkuiri Terbimbingterdapat motivasi belajar Biologi siswa SMA N 4 tebo

Influence of powder-bed temperature on the microstructure and mechanical properties of Ti-6Al-4V produced by selective laser melting

Advanced characterisation techniques were used on LPBF Ti-6Al-4V samples produced on a heated base plate. When the substrate temperature is 100{\deg}C the elongation is 6\%, which increases and peaks at 10\% at 570{\deg}C, then sharply decreases to zero ductility at 770{\deg}C. At 100{\deg}C, a heavily strained and twinned microstructure, primarily composed of {\alpha}+{\alpha}', was observed and it was comparable to asbuilt microstructures obtained by conventional LPBF methods. At higher temperatures, twins are no longer present and instead nano-scale {\beta} precipitates are observed within {\alpha}' and {\alpha}, as well as dislocation networks (570{\deg}C) and tangles (770{\deg}C). Solute segregation at crystal defects was observed in all pre-heating conditions. Al and V segregation at microtwins was observed in the 100{\deg}C sample, reporting for the first time `selective' and mutually exclusive Al- and V-rich regions forming in adjacent twins. V segregation at dislocations was observed in the 570{\deg}C and 770{\deg}C samples, consistent with the higher preheating temperatures. High O contents were measured in all samples but with apparent opposing effects. At 100{\deg}C and 570{\deg}C was estimated to be below the critical threshold for O embrittlement and locally aids in maintaining a strength high by solid solution strengthening, whereas at 770{\deg}C it was above the threshold, therefore failing in a brittle fashion. Based on these observations, the initial increase in ductility from 100{\deg}C to 570{\deg}C is attributed to a reduction in microtwins and the dislocation networks acting as `soft barriers' for slip within a coarser microstructure. The lack of ductility at 770{\deg}C was attributed to local solute redistribution causing dislocation pinning and an increase of O content in this sample

Pediatric blood transfusion practices at a regional referral hospital in Kenya

Report of an audit of tranfusion blood use in a large Kenyan hospita

Effect of Substrate Bed Temperature on Solute Segregation and Mechanical Properties in Ti–6Al–4V Produced by Laser Powder Bed Fusion

Titanium alloys are particularly sensitive to temperature during additive manufacturing processes, due to their dual phase microstructure and sensitivity to oxygen uptake. In this paper, laser powder bed fusion (LPBF) was used in conjunction with a heated substrate bed at 100 °C, 570 °C and 770 °C to produce specimens of Ti–6Al–4V, to investigate the change in mechanical properties and segregation of alloying elements. An initial increase in ductility was observed when increasing the temperature from 100 °C to 570 °C, followed by a significant loss in ductility when samples were produced at 770 °C. A suite of multi-scale characterisation techniques revealed that the as-printed microstructure was drastically different across the range of temperatures. At 100 °C, α + α′ phases were identified. Deformation twinning was extensively observed in the a phase, with Al and V segregating at the twin interfaces. At 570 °C (the most ductile sample), α′, α and nano-particles of β were observed, with networks of entangled dislocations showing V segregation. At 770 °C, no martensitic α′ was identified. The microstructure was an α + β microstructure and an increased volume fraction of tangled dislocations with localised V segregation. Thermodynamic modelling based on the Gibbs-free energy of formation showed that the increased V concentration at dislocations was insufficient to locally nucleate β phase. However, b-phase nucleation at grain boundaries (not dislocations) caused pinning of grain boundaries, impeding slip and leading to a reduction in ductility. It is likely that the increased O-content within specimens printed at increased temperatures also played a key role in high-temperature embrittlement. Building operations are therefore best performed below sub-transus temperatures, to encourage the growth of strengthening phases via solute segregation, and the build atmosphere must be tightly controlled to reduce oxygen uptake within the samples

Single photon emission from plasma treated 2D hexagonal boron nitride

© 2018 The Royal Society of Chemistry. Artificial atomic systems in solids are becoming increasingly important building blocks in quantum information processing and scalable quantum nanophotonic networks. Amongst numerous candidates, 2D hexagonal boron nitride has recently emerged as a promising platform hosting single photon emitters. Here, we report a number of robust plasma and thermal annealing methods for fabrication of emitters in tape-exfoliated hexagonal boron nitride (hBN) crystals. A two-step process comprising Ar plasma etching and subsequent annealing in Ar is highly robust, and yields an eight-fold increase in the concentration of emitters in hBN. The initial plasma-etching step generates emitters that suffer from blinking and bleaching, whereas the two-step process yields emitters that are photostable at room temperature with emission wavelengths greater than ∼700 nm. Density functional theory modeling suggests that the emitters might be associated with defect complexes that contain oxygen. This is further confirmed by generating the emitters via annealing hBN in air. Our findings advance the present understanding of the structure of quantum emitters in hBN and enhance the nanofabrication toolkit needed to realize integrated quantum nanophotonic circuits

Acute toxicity, brine shrimp cytotoxicity and relaxant activity of fruits of callistemon citrinus curtis

<p>Abstract</p> <p>Background</p> <p><it>Callistemon citrinus </it>Curtis belongs to family Myrtaceae that has a great medicinal importance. In our previous work, fruits of <it>Callistemon citrinus </it>were reported to have relaxant (antispasmodic) activity. The current work describes the screening of fractions of the crude methanol extract for tracing spasmolytic constituents so that it shall help us for isolation of bioactive compounds. Acute toxicity and brine shrimp cytotoxicity of crude methanol extract are also performed to standardize it.</p> <p>Methods</p> <p>The crude methanol extract was obtained by maceration with distilled water (500 ml) three times and fractionated successively with <it>n-</it>hexane, chloroform, ethyl acetate and <it>n-</it>butanol (300 ml of each solvent). Phytochemical analysis for crude methanol extract was performed. Acute toxicity studies were performed in mice. Brine shrimp cytotoxicity studies were performed to determine its cytotoxicity and standardize it. In other series of experiments, rabbits' jejunum preparations were used in screening for possible relaxant activities of various fractions. They were applied in concentrations of 0.01, 0.03, 0.1, 0.3, 1.0, 3.0, 5.0 and 10.0 mg/ml on spontaneous rabbits' jejunum preparations. In similar fashion, fractions were also tested on KCl (80 mM) -induced contractions. Calcium chloride curves were constructed in K-rich Tyrode's solution. The effects of various fractions were tested on calcium chloride curves at concentrations 1.0, 3.0, 5.0 and 10.0 mg/ml. Curves of verapamil used as reference drug at concentration 0.1 μM and 0.3 μM were also constructed. The curves were compared with their respective controls for possible right shift.</p> <p>Results</p> <p>Methanol extract tested strongly positive for saponins and tannins. However, it tested mild positive for presence of proteins, amino acids, carbohydrates and phenolic compounds. LD₅₀value for crude methanol extract is 476.25 ± 10.3 (470-481, n = 4) mg/ml. Similarly, EC₅₀value for brine shrimp cytotoxicity is 65.5 ± 7.28 (60.8- 69.4, n = 4) mg/ml. All the fractions relaxed the spontaneous and KCl-induced contractions. EC₅₀values (mg/ml) for effects of ethyl acetate fraction on spontaneous and KCl induced contractions are 2.62 ± 0.78 (2.15-3.0, n = 4) and 3.72 ± 0.86 (3.38-4.28, n = 4) respectively. Respective EC₅₀values (mg/ml) for <it>n-</it>butanol fraction are 3.59 ± 0.2(3.07-3.9, n = 4) for spontaneous, and 5.57 ± 0.2 (5.07-6.11, n = 4) for KCl- induced contractions. EC₅₀value for control calcium chloride curve (without extract) is -2.73 ± 0.19 (-2.6 - -2.81, n = 4) while EC₅₀for curves treated with 5.0 mg/ml of chloroform is -2.22 ± 0.02 (-2.16 - -2.3, n = 4). EC₅₀value for ethyl acetate treated (1.0 mg/ml) tissues is -1.95 ± 0.10 (-1.88 - -2.0, n = 4) <it>vs</it>. control EC₅₀= -2.71 ± 0.08 (-2.66 - -2.76, n = 4). All the fractions, except <it>n-</it>hexane, showed a right shift like that of verapamil (EC₅₀= -1.72 ± 0.15 (-1.62 - -1.8, n = 4) vs. Control EC₅₀= -2.41 ± 0.06 (-2.38 - - 2.44, n = 4), a standard drug that blocks voltage operated calcium channels.</p> <p>Conclusion</p> <p>Relaxant constituents were more concentrated in ethylacetate fraction followed by chloroform, <it>n -</it>butanol and aqueous fractions that warrant for its isolation. The crude methanol extract is safe at concentration 250 mg/ml or below and results of brine shrimp cytotoxicity assay imply the plant specie may be a source of cytotoxic agents.</p

The dynamics of measles in sub-Saharan Africa.

Although vaccination has almost eliminated measles in parts of the world, the disease remains a major killer in some high birth rate countries of the Sahel. On the basis of measles dynamics for industrialized countries, high birth rate regions should experience regular annual epidemics. Here, however, we show that measles epidemics in Niger are highly episodic, particularly in the capital Niamey. Models demonstrate that this variability arises from powerful seasonality in transmission-generating high amplitude epidemics-within the chaotic domain of deterministic dynamics. In practice, this leads to frequent stochastic fadeouts, interspersed with irregular, large epidemics. A metapopulation model illustrates how increased vaccine coverage, but still below the local elimination threshold, could lead to increasingly variable major outbreaks in highly seasonally forced contexts. Such erratic dynamics emphasize the importance both of control strategies that address build-up of susceptible individuals and efforts to mitigate the impact of large outbreaks when they occur