10,633 research outputs found
Annoyance resulting from intrusion of aircraft sounds upon various activities
An experiment was conducted in which subjects were engaged in TV viewing, telephone listening, or reverie (no activity) for a 1/2-hour session. During the session, they were exposed to a series of recorded aircraft sounds at the rate of one flight every 2 minutes. Within each session, four levels of flyover noise, separated by dB increments, were presented several times in a Latin Square balanced sequence. The peak level of the noisiest flyover in any session was fixed at 95, 90, 85, 75, or 70 dBA. At the end of the test session, subjects recorded their responses to the aircraft sounds, using a bipolar scale which covered the range from very pleasant to extremely annoying. Responses to aircraft noises were found to be significantly affected by the particular activity in which the subjects were engaged. Not all subjects found the aircraft sounds to be annoying
Effects of three activities on annoyance responses to recorded flyovers
Human subjects participated in an experiment in which they were engaged in TV viewing, telephone listening, or reverie (no activity) for a 1/2-hour session. During the session, they were exposed to a series of recorded aircraft sounds at the rate of one flight every 2 minutes. At each session, four levels of flyover noise, separated by 5 db increments were presented several times in a Latin Square balanced sequence. The peak levels of the noisiest flyover in any session was fixed at 95, 90, 85, 75, or 70 db. At the end of the test session, subjects recorded their responses to the aircraft sounds, using a bipolar scale which covered the range from very pleasant to extremely annoying. Responses to aircraft noises are found to be significantly affected by the particular activity in which the subjects are engaged
A new efficient method for determining weighted power spectra: detection of low-frequency solar p-modes by analysis of BiSON data
We present a new and highly efficient algorithm for computing a power
spectrum made from evenly spaced data which combines the noise-reducing
advantages of the weighted fit with the computational advantages of the Fast
Fourier Transform (FFT). We apply this method to a 10-year data set of the
solar p-mode oscillations obtained by the Birmingham Solar Oscillations Network
(BiSON) and thereby uncover three new low-frequency modes. These are the l=2,
n=5 and n=7 modes and the l=3, n=7 mode. In the case of the l=2, n=5 modes,
this is believed to be the first such identification of this mode in the
literature. The statistical weights needed for the method are derived from a
combination of the real data and a sophisticated simulation of the instrument
performance. Variations in the weights are due mainly to the differences in the
noise characteristics of the various BiSON instruments, the change in those
characteristics over time and the changing line-of-sight velocity between the
stations and the Sun. It should be noted that a weighted data set will have a
more time-dependent signal than an unweighted set and that, consequently, its
frequency spectrum will be more susceptible to aliasing.Comment: 11 pages, 7 Figures, accepted for publication in MNRAS, Figure 6 had
to be reduced in size to upload and so may be difficult to view on screen in
.ps versio
Applications of flight control system methods to an advanced combat rotorcraft
Advanced flight control system design, analysis, and testing methodologies developed at the Ames Research Center are applied in an analytical and flight test evaluation of the Advanced Digital Optical Control System (ADOCS) demonstrator. The primary objectives are to describe the knowledge gained about the implications of digital flight control system design for rotorcraft, and to illustrate the analysis of the resulting handling-qualities in the context of the proposed new handling-qualities specification for rotorcraft. Topics covered in-depth are digital flight control design and analysis methods, flight testing techniques, ADOCS handling-qualities evaluation results, and correlation of flight test results with analytical models and the proposed handling-qualities specification. The evaluation of the ADOCS demonstrator indicates desirable response characteristics based on equivalent damping and frequency, but undersirably large effective time-delays (exceeding 240 m sec in all axes). Piloted handling-qualities are found to be desirable or adequate for all low, medium, and high pilot gain tasks; but handling-qualities are inadequate for ultra-high gain tasks such as slope and running landings
Fast iterative solution of reaction-diffusion control problems arising from chemical processes
PDE-constrained optimization problems, and the development of preconditioned iterative methods for the efficient solution of the arising matrix system, is a field of numerical analysis that has recently been attracting much attention. In this paper, we analyze and develop preconditioners for matrix systems that arise from the optimal control of reaction-diffusion equations, which themselves result from chemical processes. Important aspects in our solvers are saddle point theory, mass matrix representation and effective Schur complement approximation, as well as the outer (Newton) iteration to take account of the nonlinearity of the underlying PDEs
Are short-term variations in solar oscillation frequencies the signature of a second solar dynamo?
In addition to the well-known 11-year solar cycle, the Sun's magnetic
activity also shows significant variation on shorter time scales, e.g. between
one and two years. We observe a quasi-biennial (2-year) signal in the solar
p-mode oscillation frequencies, which are sensitive probes of the solar
interior. The signal is visible in Sun-as-a-star data observed by different
instruments and here we describe the results obtained using BiSON, GOLF, and
VIRGO data. Our results imply that the 2-year signal is susceptible to the
influence of the main 11-year solar cycle. However, the source of the signal
appears to be separate from that of the 11-year cycle. We speculate as to
whether it might be the signature of a second dynamo, located in the region of
near-surface rotational shear.Comment: 6 pages, 2 figures, proceedings for SOHO-24/GONG 2010 conference, to
be published in JPC
Application of laser Doppler velocimeter to chemical vapor laser system
A laser Doppler velocimeter (LDV) system was used to measure iodide vapor flow fields inside two different-sized tubes. Typical velocity profiles across the laser tubes were obtained with an estimated +/-1 percent bias and +/-0.3 to 0.5 percent random uncertainty in the mean values and +/-2.5 percent random uncertainty in the turbulence-intensity values. Centerline velocities and turbulence intensities for various longitudinal locations ranged from 13 to 17.5 m/sec and 6 to 20 percent, respectively. In view of these findings, the effects of turbulence should be considered for flow field modeling. The LDV system provided calibration data for pressure and mass flow systems used routinely to monitor the research laser gas flow velocity
Geometric approach to Fletcher's ideal penalty function
Original article can be found at: www.springerlink.com Copyright Springer. [Originally produced as UH Technical Report 280, 1993]In this note, we derive a geometric formulation of an ideal penalty function for equality constrained problems. This differentiable penalty function requires no parameter estimation or adjustment, has numerical conditioning similar to that of the target function from which it is constructed, and also has the desirable property that the strict second-order constrained minima of the target function are precisely those strict second-order unconstrained minima of the penalty function which satisfy the constraints. Such a penalty function can be used to establish termination properties for algorithms which avoid ill-conditioned steps. Numerical values for the penalty function and its derivatives can be calculated efficiently using automatic differentiation techniques.Peer reviewe
Lead in Kentucky Soils
This study reviewed the literature on the occurrence of lead in soils and its relationship to waste oil tank leaks. Many studies have been conducted on the natural occurrence of lead in rocks, soils and water. Very low levels (0.001 mg/l to 0.01 mg/l) are found in surface and groundwater, variable levels are found in soils (from less that 10 ppm to as high as 700 ppm but more normally a high of 70 ppm), and the lead levels found in rocks range from 7 to 80 mg/kg.
Risk assessment calculations have been made by several individuals, also with variable results. One value was computed at 20 mg/kg lead in soil and another was calculated as high as 200 mg/kg. A standard of 25 mg/kg is proposed for Kentucky based on the natural background level found in soils studied in the state. For sample values taken in tank pits that do not meet this standard a background value must be determined by taking 5 soil samples at one-meter depth upgradient from the tank pit and averaging them.
Even though recommended cleanup level is not based on risk analysis methods, when referring to various risk documents, the value selected here is slightly lower than mean value (36 mg/kg) derived from an analysis of background samples at various remediation sites across the state. Standards in place in other states range from less than 0.1 mg/kg to as high as 2000 mg/kg. Texas uses 20 times the MCL, and Pennsylvania uses 200 ppm for the non-indiustrial sites and 600 ppm for industrial sites
A New Approach to Monitoring Coastal Marshes for Persistent Flooding
Many areas in coastal Louisiana are below sea level and protected from flooding by a system of natural and man-made levees. Flooding is common when the levees are overtopped by storm surge or rising rivers. Many levees in this region are further stressed by erosion and subsidence. The floodwaters can become constricted by levees and trapped, causing prolonged inundation. Vegetative communities in coastal regions, from fresh swamp forest to saline marsh, can be negatively affected by inundation and changes in salinity. As saltwater persists, it can have a toxic effect upon marsh vegetation causing die off and conversion to open water types, destroying valuable species habitats. The length of time the water persists and the average annual salinity are important variables in modeling habitat switching (cover type change). Marsh type habitat switching affects fish, shellfish, and wildlife inhabitants, and can affect the regional ecosystem and economy. There are numerous restoration and revitalization projects underway in the coastal region, and their effects on the entire ecosystem need to be understood. For these reasons, monitoring persistent saltwater intrusion and inundation is important. For this study, persistent flooding in Louisiana coastal marshes was mapped using MODIS (Moderate Resolution Imaging Spectroradiometer) time series of a Normalized Difference Water Index (NDWI). The time series data were derived for 2000 through 2009, including flooding due to Hurricane Rita in 2005 and Hurricane Ike in 2008. Using the NDWI, duration and extent of flooding can be inferred. The Time Series Product Tool (TSPT), developed at NASA SSC, is a suite of software developed in MATLAB(R) that enables improved-quality time series images to be computed using advanced temporal processing techniques. This software has been used to compute time series for monitoring temporal changes in environmental phenomena, (e.g. NDVI times series from MODIS), and was modified and used to compute the NDWI indices and also the Normalized Difference Soil Index (NDSI). Coastwide Reference Monitoring System (CRMS) water levels from various hydrologic monitoring stations and aerial photography were used to optimize thresholds for MODIS-derived time series of NDWI and to validate resulting flood maps. In most of the profiles produced for post-hurricane assessment, the increase in the NDWI index (from storm surge) is accompanied by a decrease in the vegetation index (NDVI) and then a period of declining water. The NDSI index represents non-green or dead vegetation and increases after the hurricane s destruction of the marsh vegetation. Behavior of these indices over time is indicative of which areas remain flooded, which areas recover to their former levels of vegetative vigor, and which areas are stressed or in transition. Tracking these indices over time shows the recovery rate of vegetation and the relative behavior to inundation persistence. The results from this study demonstrated that identification of persistent marsh flooding, utilizing the tools developed in this study, provided an approximate 70-80 percent accuracy rate when compared to the actual days flooded at the CRMS stations
- …