Evaluation of Superplastic Forming and Weld-brazing for Fabrication of Titanium Compression Panels

The two titanium processing procedures, superplastic forming and weld brazing, are successfully combined to fabricate titanium skin stiffened structural panels. Stiffeners with complex shapes are superplastically formed using simple tooling. These stiffeners are formed to the desired configuration and required no additional sizing or shaping following removal from the mold. The weld brazing process by which the stiffeners are attached to the skins utilize spot welds to maintain alignment and no additional tooling is required for brazing. The superplastic formed/weld brazed panels having complex shaped stiffeners develop up to 60 percent higher buckling strengths than panels with conventional shaped stiffeners. The superplastic forming/weld brazing process is successfully scaled up to fabricate full size panels having multiple stiffeners. The superplastic forming/weld brazing process is also successfully refined to show its potential for fabricating multiple stiffener compression panels employing unique stiffener configurations for improved structural efficiency

Halogenation of microcapsule walls

Procedure for halogenation of confining walls of both gelatin and gelatin-phenolic resin capsules is similar to that used for microencapsulation. Ten percent halogen content renders capsule wall nonburning; any higher content enhances flame-retardant properties of selected internal phase material. Halogenation decreases permeability of wall material to encapsulated materials

Curved cap corrugated sheet

The report describes a structure for a strong, lightweight corrugated sheet. The sheet is planar or curved and includes a plurality of corrugation segments, each segment being comprised of a generally U-shaped corrugation with a part-cylindrical crown and cap strip, and straight side walls and with secondary corrugations oriented at right angles to said side walls. The cap strip is bonded to the crown and the longitudinal edge of said cap strip extends beyond edge at the intersection between said crown and said side walls. The high strength relative to weight of the structure makes it desirable for use in aircraft or spacecraft

Structural efficiency studies of corrugated compression panels with curved caps and beaded webs

Curved cross-sectional elements are employed in structural concepts for minimum-mass compression panels. Corrugated panel concepts with curved caps and beaded webs are optimized by using a nonlinear mathematical programming procedure and a rigorous buckling analysis. These panel geometries are shown to have superior structural efficiencies compared with known concepts published in the literature. Fabrication of these efficient corrugation concepts became possible by advances made in the art of superplastically forming of metals. Results of the mass optimization studies of the concepts are presented as structural efficiency charts for axial compression

Chiral Vortons and Cosmological Constraints on Particle Physics

We investigate the cosmological consequences of particle physics theories that admit stable loops of current-carrying string - vortons. In particular, we consider chiral theories where a single fermion zero mode is excited in the string core, such as those arising in supersymmetric theories with a D-term. The resulting vortons formed in such theories are expected to be more stable than their non-chiral cousins. General symmetry breaking schemes are considered in which strings formed at one symmetry breaking scale become current-carrying at a subsequent phase transition. The vorton abundance is estimated and constraints placed on the underlying particle physics theories from cosmological observations. Our constraints on the chiral theory are considerably more stringent than the previous estimates for more general theories.Comment: minor corrections made. This version will appear in PR

Fabrication and evaluation of cold/formed/weldbrazed beta-titanium skin-stiffened compression panels

The room temperature and elevated temperature buckling behavior of cold formed beta titanium hat shaped stiffeners joined by weld brazing to alpha-beta titanium skins was determined. A preliminary set of single stiffener compression panels were used to develop a data base for material and panel properties. These panels were tested at room temperature and 316 C (600 F). A final set of multistiffener compression panels were fabricated for room temperature tests by the process developed in making the single stiffener panels. The overall geometrical dimensions for the multistiffener panels were determined by the structural sizing computer code PASCO. The data presented from the panel tests include load shortening curves, local buckling strengths, and failure loads. Experimental buckling loads are compared with the buckling loads predicted by the PASCO code. Material property data obtained from tests of ASTM standard dogbone specimens are also presented

Instant acting adhesive system

Adhesive developes 80 percent of minimum bond strength of 250 psi less than 30 sec after activation is required. Adhesive is stable, handles easily, is a low toxic hazard, and is useful in industrial and domestic prototype bonding and clamping operations

What makes a 'good group'? Exploring the characteristics and performance of undergraduate student groups

Group work forms the foundation for much of student learning within higher education, and has many educational, social and professional benefits. This study aimed to explore the determinants of success or failure for undergraduate student teams and to define a ‘good group’ through considering three aspects of group success: the task, the individuals, and the team. We employed a mixed methodology, combining demographic data with qualitative observations and task and peer evaluation scores. We determined associations between group dynamic and behaviour, demographic composition, member personalities and attitudes towards one another, and task success. We also employed a cluster analysis to create a model outlining the attributes of a good small group learning team in veterinary education. This model highlights that student groups differ in measures of their effectiveness as teams, independent of their task performance. On the basis of this, we suggest that groups who achieve high marks in tasks cannot be assumed to have acquired team working skills, and therefore if these are important as a learning outcome, they must be assessed directly alongside the task output

Superconducting String Texture

We present a detailed analytical and numerical study of a novel type of static, superconducting, classically stable string texture in a renormalizable topologically trivial massive U(1) gauge model with one charged and one neutral scalar. An upper bound on the mass of the charged scalar as well as on the current that the string can carry are established. A preliminary unsuccesful search for stable solutions corresponding to large superconducting loops is also reported.Comment: RevTex, 14 pages, 8 figure

Radiative Transfer in Star Formation: Testing FLD and Hybrid Methods

We perform a comparison between two radiative transfer algorithms commonly employed in hydrodynamical calculations of star formation: grey flux limited diffusion and the hybrid scheme, in addition we compare these algorithms to results from the Monte-Carlo radiative transfer code MOCASSIN. In disc like density structures the hybrid scheme performs significantly better than the FLD method in the optically thin regions, with comparable results in optically thick regions. In the case of a forming high mass star we find the FLD method significantly underestimates the radiation pressure by a factor of ~100.Comment: 4 Pages; to appear in the proceedings of 'The Labyrinth of Star Formation', Crete, 18-22 June 201