Improving Gold/Gold Microcontact Performance and Reliability Under Low-Frequency AC Through Circuit Loading

This paper investigates the performance and reliability of microcontacts under low-frequency and low-amplitude ac test conditions. Current microcontact theory is based on dc tests adapted to RF applications. To help better apply dc theory to RF applications, frequencies between 100 Hz to 100 kHz were experimentally investigated. Microcontacts designed to conduct performance and reliability measurements were used, which in prior dc testing typically lasted for 100 million cycles or more. Under ac loads, at similar power levels, eight devices were tested under cold-switching conditions, and only one was still operational at 10 million cycles. The effect of external circuitry on dc loaded devices was also considered. The experimental data were presented for dc conditions, which demonstrated that both a parallel capacitance with a microcontact and a series inductance were highly detrimental. For all six tested devices, failure occurred typically in 100 thousand cycles or less. However, utilizing series resistive/capacitive circuits as well as parallel resistor/inductive resulted in improved performance, with only one device of the four tested failing prematurely, but those that lasted showed less variation in measure contact resistance throughout the lifetime of the device. Two devices were tested with passive contact protection using parallel and series resistances, and both devices lasted for the full test duration. Finally, the effects of applying circuit protection to microcontacts and repeating ac test conditions were investigated. Reliability and device lifetime were extended significantly (9.1% success rate without protection was increased to 87% success rate). It was also observed in several instances that devices that failed showed subtle signs of variance during contact closure measurements in the range of 5-30 μ N, indicating a possible means for accurately predicting device failure. For these failed devices, notable physical damage was observed using a scanning electron microscope

Modeling Micro-Porous Surfaces for Secondary Electron Emission Control to Suppress Multipactor

This work seeks to understand how the topography of a surface can be engineered to control secondary electron emission (SEE) for multipactor suppression. Two unique, semi-empirical models for the secondary electron yield (SEY) of a micro-porous surface are derived and compared. The first model is based on a two-dimensional (2D) pore geometry. The second model is based on a three-dimensional (3D) pore geometry. The SEY of both models is shown to depend on two categories of surface parameters: chemistry and topography. An important parameter in these models is the probability of electron emissions to escape the surface pores. This probability is shown by both models to depend exclusively on the aspect ratio of the pore (the ratio of the pore height to the pore diameter). The increased accuracy of the 3D model (compared to the 2D model) results in lower electron escape probabilities with the greatest reductions occurring for aspect ratios less than two. In order to validate these models, a variety of micro-porous gold surfaces were designed and fabricated using photolithography and electroplating processes. The use of an additive metal-deposition process (instead of the more commonly used subtractive metal-etch process) provided geometrically ideal pores which were necessary to accurately assess the 2D and 3D models. Comparison of the experimentally measured SEY data with model predictions from both the 2D and 3D models illustrates the improved accuracy of the 3D model. For a micro-porous gold surface consisting of pores with aspect ratios of two and a 50% pore density, the 3D model predicts that the maximum total SEY will be one. This provides optimal engineered surface design objectives to pursue for multipactor suppression using gold surfaces

Impacts of caring for a child with the CDKL5 disorder on parental wellbeing and family quality of life

Background: Although research in this area remains sparse, raising a child with some genetic disorders has been shown to adversely impact maternal health and family quality of life. The aim of this study was to investigate such impacts in families with a child with the CDKL5 disorder, a newly recognised genetic disorder causing severe neurodevelopmental impairments and refractory epilepsy. Methods: Data were sourced from the International CDKL5 Disorder Database to which 192 families with a child with a pathogenic CDKL5 mutation had provided data by January 2016. The Short Form 12 Health Survey Version 2, yielding a Physical Component Summary and a Mental Component Summary score, was used to measure primary caregiver's wellbeing. The Beach Center Family Quality of Life Scale was used to measure family quality of life. Linear regression analyses were used to investigate relationships between child and family factors and the various subscale scores. Results: The median (range) age of the primary caregivers was 37.0 (24.6-63.7) years and of the children was 5.2 (0.2-34.1) years. The mean (SD) physical and mental component scores were 53.7 (8.6) and 41.9 (11.6), respectively. In mothers aged 25-54 years the mean mental but not the physical component score was lower than population norms. After covariate adjustment, caregivers with a tube-fed child had lower mean physical but higher mean mental component scores than those whose child fed orally (coefficient = -4.80 and 6.79; p = 0.009 and 0.012, respectively). Child sleep disturbances and financial hardship were negatively associated with the mental component score. The mean (SD) Beach Center Family Quality of Life score was 4.06 (0.66) and those who had used respite services had lower scores than those who had not across the subscales. Conclusions: Emotional wellbeing was considerably impaired in this caregiver population, and was particularly associated with increased severity of child sleep problems and family financial difficulties. Family quality of life was generally rated lowest in those using respite care extensively, suggesting that these families may be more burdened by daily caregiving

Incontinence in Individuals with Rett Syndrome: A Comparative Study

Frequency and type of incontinence and its association with other variables were assessed in females with Rett Syndrome (RS) (n = 63), using an adapted Dutch version of the ‘Parental Questionnaire: Enuresis/Urinary Incontinence’ (Beetz et al. 1994). Also, incontinence in RS was compared to a control group consisting of females with non-specific (mixed) intellectual disability (n = 26). Urinary incontinence (UI) (i.e., daytime incontinence and nocturnal enuresis) and faecal incontinence (FI) were found to be common problems among females with RS that occur in a high frequency of days/nights. UI and FI were mostly primary in nature and occur independent of participants’ age and level of adaptive functioning. Solid stool, lower urinary tract symptoms and urinary tract infections (UTI’s) were also common problems in females with RS. No differences in incontinence between RS and the control group were found, except for solid stool that was more common in RS than in the control group. It is concluded that incontinence is not part of the behavioural phenotype of RS, but that there is an increased risk for solid stool in females with RS

Caretaker Quality of Life in Rett Syndrome: Disorder Features and Psychological Predictors

ObjectiveRett syndrome is a severe neurodevelopmental disorder affecting approximately one in 10,000 female births. The clinical features of Rett syndrome are known to impact both patients' and caretakers' quality of life in Rett syndrome. We hypothesized that more severe clinical features would negatively impact caretaker physical quality of life but would positively impact caretaker mental quality of life.MethodsParticipants were individuals enrolled in the Rett Natural History Study with a diagnosis of classic Rett syndrome. Demographic data, clinical disease features, caretaker quality of life, and measures of family function were assessed during clinic visits. The Optum SF-36v2 Health Survey was used to assess caretaker physical and mental quality of life (higher scores indicate better quality of life). Descriptive, univariate, and multivariate analyses were used to characterize relationships between child and caretaker characteristics and caretaker quality of life.ResultsCaretaker physical component scores (PCS) were higher than mental component scores (MCS): 52.8 (9.7) vs 44.5 (12.1). No differences were demonstrated between the baseline and 5-year follow-up. In univariate analyses, disease severity was associated with poorer PCS (P = 0.006) and improved MCS (P = 0.003). Feeding problems were associated with poorer PCS (P = 0.007) and poorer MCS (P = 0.018). In multivariate analyses, limitations in caretaker personal time and home conflict adversely affected PCS. Feeding problems adversely impacted MCS.ConclusionsCaretaker quality of life in Rett syndrome is similar to that for caretakers in other chronic diseases. Disease characteristics significantly impact quality of life, and feeding difficulties may represent an important clinical target for improving both child and caretaker quality of life. The stability of quality-of-life scores between baseline and five years adds important value