310 research outputs found
Role of Auxin in Maize Endosperm Development (Timing of Nuclear DNA Endoreduplication, Zein Expression, and Cytokinin)
Excess lead in the perovskite lattice of PZT thin films made by in-situ reactive sputtering
The incorporation of up to 40 % lead excess into the perovskite lattice of Pb(Zr,Ti)O-3 (PZT) has been investigated. Three independent chemical composition analysis methods confirmed the correct determination of the lead excess, present as Pb2O3. High resolution TEM excludes any second phases and restricts the occurrence of lead excess to the perovskite lattice, suggesting a lead oxide perovskite of the form Pb2+Pb4+O3 with a 4-valent ion on the B-site. PZT containing such lead excess is thus a solid solution of PbZrO3, PbTiO3 and PbPbO3. The measured volume increase of the lattice due to a larger average B-ion matches very well with the calculated behavior based on standard ion radii and the B-ion radius dependence of the unit cell dimensions of PZT crystals. Structure factors as determined from Synchrotron X-ray diffraction are much better compatible with the B-site lead model than with the standard PZT ion lattice
Electrostatic model of atomic ordering in complex perovskite alloys
We present a simple ionic model which successfully reproduces the various
types of compositional long-range order observed in a large class of complex
insulating perovskite alloys. The model assumes that the driving mechanism
responsible for the ordering is simply the electrostatic interaction between
the different ionic species. A possible new explanation for the anomalous
long-range order observed in some Pb relaxor alloys, involving the proposed
existence of a small amount of Pb^4+ on the B sublattice, is suggested by an
analysis of the model.Comment: 4 pages, two-column style with 1 postscript figure embedded. Uses
REVTEX and epsf macros. Also available at
http://www.physics.rutgers.edu/~dhv/preprints/index.html#lb_orde
Effect of pruning young branches on fruit and seed set in cassava
Flowering in cassava is closely linked with branching. Early-flowering genotypes branch low and abundantly. Although farmers prefer late flowering genotypes because of their erect plant architecture, their usefulness as progenitors in breeding is limited by their low seed production. In general, the first inflorescence aborts in cassava. Preventing this abortion would result in early production of seeds and make cassava breeding more efficient. The objective of this study was to assess if pruning young branches prevents the abortion of first inflorescences and promotes early fruit and seed set. Four genotypes with early, late, very late, and no flowering habits were grown under an extended photoperiod (EP) or normal dark night conditions (DN). Additional treatments included pruning young branches at the first or second flowering event and spraying (or not) benzyladenine (BA) after pruning. One genotype failed to flower and was not considered further. For the remaining genotypes, EP proved crucial to induce an earlier flowering, which is a pre-requisite for pruning. Total production of seeds in EP plots was 2,971 versus 150 in DN plots. For plants grown under EP, the average number of seeds per plant without pruning was 3.88, whereas those pruned produced 17.60 seeds per plant. Pruning at the first branching event led to higher number of seeds per plant (26.25) than pruning at the second flowering event (8.95). In general, applying BA was beneficial (38.52 and 13.98 seeds/plant with or without spraying it, respectively). The best combination of treatments was different for each genotype. Pruning young branches and applying BA in the first flowering event not only prevented the abortion of inflorescences but also induced the feminization of male flowers into hermaphrodite or female-only flowers. The procedures suggested from this study (combining EP, pruning young branches, and spraying BA), allowed the production of a high number of seeds from erect cassava genotypes in a short period. The implementation of these procedures will improve the breeding efficiency in cassava
Nanoscale Electromechanics of Paraelectric Materials with Mobile Charges: Size effects and Nonlinearity of Electromechanical Response of SrTiO3 Films
Nanoscale enables a broad range of electromechanical coupling mechanisms that
are forbidden or negligible in the materials. We conduct a theoretical study of
the electromechanical response of thin paraelectric films with mobile vacancies
(or ions) paradigmatic for capacitor-type measurements in X-ray scattering,
piezoresponse force microscopy (PFM), and electrochemical strain microscopy
(ESM). Using quantum paraelectric SrTiO3 film as a model material with well
known electromechanical, electronic and electrochemical properties, we evaluate
the contributions of electrostriction, Maxwell stress, flexoelectric effect,
deformation potential and compositional Vegard strains caused by mobile
vacancies (or ions) and electrons to the electromechanical response. The local
electromechanical response manifests strong size effects, the scale of which is
determined by the ratio of the SrTiO3 film thickness and PFM/ESM tip size to
the carriers screening radius. Due to the strong dielectric nonlinearity effect
inherent in quantum paraelectrics, the dependence of the SrTiO3 film
electromechanical response on applied voltage demonstrates a pronounced
crossover from the linear to the quadratic law and then to the sub-linear law
with a factor of 2/3 under the voltage increase. The temperature dependence of
the electromechanical response as determined by the interplay between the
dielectric susceptibility and the screening radius is non-monotonic and has a
pronounced maxima, the position and width of which can be tuned by film
thickness. This study provides a comparative framework for analysis of
electromechanical coupling in the non-piezoelectric nanosystems.Comment: 50 pages, 10 figures, 3 appendices, to be submitted to Phys. Rev.
Flower-inducing technology facilitates speed breeding in cassava
Cassava is a tropical crop that provides daily carbohydrates to more than 800 million people. New cassava cultivars with improved yield, disease resistance, and food quality are critical to end hunger and reduce poverty in the tropics. However, the progress of new cultivar development has been dragged down by difficulties obtaining flowers from desired parental plants to enable designed crosses. Inducing early flowering and increasing seed production are crucial to improving the efficiency of developing farmer-preferred cultivars. In the present study, we used breeding progenitors to evaluate the effectiveness of flower-inducing technology, including photoperiod extension, pruning, and plant growth regulators. Photoperiod extension significantly reduced the time to flowering in all 150 breeding progenitors, especially late-flowering progenitors which were reduced from 6-7 months to 3-4 months. Seed production was increased by using the combination of pruning and plant growth regulators. Combining photoperiod extension with pruning and the PGR 6-benzyladenine (synthetic cytokinin) produced significantly more fruits and seeds than only photoperiod extension and pruning. Another growth regulator, silver thiosulfate, commonly used to block the action of ethylene, did not show a significant effect on fruit or seed production when combined with pruning. The present study validated a protocol for flower induction in cassava breeding programs and discussed factors to consider in implementing the technology. By inducing early flowering and increasing seed production, the protocol helped move one step further for speed breeding in cassava
Nonvolatile ferroelectric control of ferromagnetism in (Ga,Mn)As
There is currently much interest in materials and structures that provide
coupled ferroelectric and ferromagnetic responses, with a long-term goal of
developing new memories and spintronic logic elements. Within the field there
is a focus on composites coupled by magnetostrictive and piezoelectric strain
transmitted across ferromagnetic-ferroelectric interfaces, but substrate
clamping limits the response in the supported multilayer configuration favoured
for devices. This constraint is avoided in a ferroelectric-ferromagnetic
bilayer in which the magnetic response is modulated by the electric field of
the poled ferroelectric. Here, we report the realization of such a device using
a diluted magnetic semiconductor (DMS) channel and a polymer ferroelectric
gate. Polarization reversal of the gate by a single voltage pulse results in a
persistent modulation of the Curie temperature as large as 5%. The device
demonstrates direct and quantitatively understood electric-fieldmediated
coupling in a multiferroic bilayer and may provide new routes to nanostructured
DMS materials and devices via ferroelectric domain nanopatterning. The
successful implementation of a polymer-ferroelectric gate fieldeffect
transistor (FeFET) with a DMS channel adds a new functionality to semiconductor
spintronics and may be of importance for future low-voltage spintronics devices
and memory structures.Comment: 19 pages, 5 figure
Regulation of abscisic acid concentration in leaves of field-grown pearl millet (Pennisetum americanum (L.) Leeke): the role of abscisic acid export
Diurnal changes in the ABA concn. in leaves of droughted, field-grown plants of P. americanum were not always correlated with changes in bulk leaf water potential. A rapid decline in ABA content of the leaves following its rise to a peak level in mid-morning, was observed in several time-course studies despite continued water stress. The possibility that the reduction in ABA in leaves was due to an elevated rate of its export was examined by measuring ABA concn. in developing panicles (possible sinks for leaf-produced ABA) and in leaves, and by comparing the amounts of ABA in ungirdled leaves and in leaves heat-girdled at the base of the lamina to block export. ABA concn. in panicles generally paralleled those in leaves, though the peak concn. of ABA in the morning in panicles occurred later than in the leaves in some samplings. Although girdling initially increased ABA concn., it did not prevent a subsequent fall which generally paralleled the decline observed in untreated leaves. The decrease in ABA that occurred despite the block to export and despite continuing stress was attributed to changes in the synthesis or metabolism of ABA within the leaf. The probable rate of export of ABA from leaves, calculated from the changes in its concn. due to girdling, was highest at the time of most rapid ABA accumulation and declined thereafter. The percentage export of recently assimilated C declined similarly. However, the probable absolute rate of export of photosynthate, computed from stomatal conductance and [14C]-export measurements, was not uniquely related to that of AB
Food security through translational biology between wheat and rice
Wheat and rice are the most important food crops in agriculture providing around 50% of all calories consumed in the human diet. While both are C3 species, the evolution and domestication of wheat and rice occurred in very different environments, resulting in diverse anatomical and metabolic adaptation. This review focuses on the current understanding of their adaptation in an agronomic context. The similarities and differences between wheat and rice are discussed, focusing on traits related to phenology, photosynthesis, assimilate partitioning, and lodging resistance, these being the main abiotic drivers of yield expression in most agro‐ecosystems. Currently, there are significant knowledge gaps in the major biological processes that account not only for differential adaption among cultivars within each species, but even between the two species. By addressing what is known as well as where gaps exist in a comparative context, this review aims to highlight translational research approaches that could provide insights into the genetic improvement of both crops
- …