Physical Properties of Asteroid (308635) 2005 YU55 derived from multi-instrument infrared observations during a very close Earth-Approach

The near-Earth asteroid (308635) 2005 YU55 is a potentially hazardous asteroid which was discovered in 2005 and passed Earth on November 8th 2011 at 0.85 lunar distances. This was the closest known approach by an asteroid of several hundred metre diameter since 1976 when a similar size object passed at 0.5 lunar distances. We observed 2005 YU55 from ground with a recently developed mid-IR camera (miniTAO/MAX38) in N- and Q-band and with the Submillimeter Array (SMA) at 1.3 mm. In addition, we obtained space observations with Herschel/PACS at 70, 100, and 160 micron. Our thermal measurements cover a wide range of wavelengths from 8.9 micron to 1.3 mm and were taken after opposition at phase angles between -97 deg and -18 deg. We performed a radiometric analysis via a thermophysical model and combined our derived properties with results from radar, adaptive optics, lightcurve observations, speckle and auxiliary thermal data. We find that (308635) 2005 YU55 has an almost spherical shape with an effective diameter of 300 to 312 m and a geometric albedo pV of 0.055 to 0.075. Its spin-axis is oriented towards celestial directions (lam_ecl, beta_ecl) = (60 deg +/- 30deg, -60 deg +/- 15 deg), which means it has a retrograde sense of rotation. The analysis of all available data combined revealed a discrepancy with the radar-derived size. Our radiometric analysis of the thermal data together with the problem to find a unique rotation period might be connected to a non-principal axis rotation. A low to intermediate level of surface roughness (r.m.s. of surface slopes in the range 0.1 - 0.3) is required to explain the available thermal measurements. We found a thermal inertia in the range 350-800 Jm^-2s^-0.5K^-1, very similar to the rubble-pile asteroid (25143) Itokawa and indicating a mixture of low conductivity fine regolith with larger rocks and boulders of high thermal inertia on the surface.Comment: Accepted for publication in Astronomy & Astrophysics, 12 pages, 10 figure

The University of Tokyo Atacama Observatory 6.5m Telescope: Design of mirror coating system and its performances II

The telescope of the University of Tokyo Atacama Observatory has a primary mirror with a diameter in 6.5m. In order to fabricate the reflecting film initially on the mirror surface and to maintain its optical performance over a long period, a mirror{coating facility will be installed in operation building beside enclosure of the telescope at the summit of Co. Chajnantor (5,640m). The facility consists of mirror coating chamber, cleaning unit for stripping off the old film and clean-up the mirror, and a cart with a lifter for handling the primary mirror cell. Almost all equipment, including the main chamber, was completed by early 2020 and engaged as a mirror coating facility. In order to optimize the coating parameters, comprehensive performance tests were carried out (without primary mirror cell which plays a role of a part of chamber). The evaluation items are how long it takes to reach the target vacuum level and parameters of the current, voltage, and application time during ion bombardment and aluminization. Through iterating test, we were able to obtain each parameter that ultimately met the requirements of the TAO telescope mirror. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only.Immediate accessThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

The University of Tokyo Atacama Observatory 6.5m telescope: Site development

One of remarkable features of the University of Tokyo Atacama Observatory (TAO) is an altitude of the site (5,640 m.a.s.l.) While this provides us an excellent condition for astronomical observations, the site development is attended with difficulty due to the hard conditions such as low pressure, low temperature, and limited access. Site preparation for the TAO 6.5 m telescope started in Apr. 2018. Firstly, we have constructed an access road from Pampa la bola plateau (∼ 5,000 m.a.s.l) to the summit. It has a width of < 6.5 meter for transportation of telescope parts including the 6.5meter mirror. In order to prevent collapse, angle of side slope is carefully determined based on ground condition and frozen soils. All workers always use oxygen during their work as a measure against hypobaropathy. Since the site temperature in night is lower than 0 degree even in the summer season, it is difficult to ensure quality of foundation concrete if we cast it in-situ. We use pre-cast concrete for the foundation of the telescope, the enclosure, and the support building. The biggest part is the telescope foundation. It has a weight of 600 ton. Considering the transportation to the summit, it is divided into 43 parts and unified at the summit. This is a new trial to make a massive foundation for a large telescope with pre-cast concrete. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only.Immediate accessThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

The University of Tokyo Atacama Observatory 6.5m telescope: Safety management at the extremely high altitude at Chajnantor mountain

Since the University of Tokyo Atacama Observatory (TAO) is located in extremely high altitude (5,640 m.a.s.l.), safety management is one of the most important issues for the project. We have developed safety management program for work at the site in order to prevent medical illness for humans. In this program all staff have to take medical examinations such as Electrocardiogram and Hipobaria before their work starts. The results are reviewed by medical doctor. Only authorized staff can be permitted to work at the site. During stay in site, all staff need to always use oxygen supply because there is only half of the oxygen at the site. It is also important to understand physical workload at the site. Our safety staff reviews it and determines necessary resting time for each worker, e.g. great load works need to work 50 minutes and rest 10 minutes. In addition to low air pressure, very low temperature, extremely high UV radiation, and extremely dry atmosphere should be concerned. Our program requests all staff to use winter clothes, sunblock and UV protection sunglasses and a lot of potable water consumption. Keep communication is also very important to secure the safety. Normal telephone communication is not available as well as internet connectivity. We have established satellite communication as well as UHF internal communication for general works and safety coordination with other observatories in Atacama area. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only.Immediate accessThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

The University of Tokyo Atacama Observatory 6.5 m telescope: Development of the telescope and the control system

The University of Tokyo Atacama Observatory Project is to construct a 6.5 m infrared-optimized telescope at the summit of Co. Chajnantor (5640 m altitude) in northern Chile. The telescope optics uses a Ritchey-Chretien type layout, with an under-sized secondary mirror to reduce stray light caused by thermal emission from the telescope structure. The primary mirror is a F/1.25 lightweight borosilicate glass (Ohara E6) mirror with honeycomb structure, which is developed by Steward Observatory Richard F. Caris Mirror Lab. The telescope has two Nasmyth foci and two folded-Cassegrain foci, which can be switched by rotating a tertiary mirror. The final focal ratio is 12.2 with a field of view of 25 arcmin in diameter. The telescope mount is a tripod-disk alt-azimuth mount. Both the azimuth and elevation axes are supported by and run on hydrostatic bearings, and they are driven by friction drives with servo motors, which are controlled by the telescope control system. It also controls the hexapod mount of the secondary mirror and the pneumatic actuators of the primary mirror support to keep good image quality during the observation. An off-axis Shack-Hartmann sensor installed in each focus measures the wavefront aberration of the telescope optics, then the misalignment between the secondary and primary mirrors is corrected by adjusting the hexapod mount while other aberrations are corrected by the deformation of the primary mirror. The force distribution of the actuators for correction will be calculated by fitting the wave-front errors with a series of bending modes of the primary mirror. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only.Immediate accessThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

The University of Tokyo Atacama Observatory 6.5m Telescope: Overview and construction status

Institute of Astronomy, Graduate School of Science, the University of Tokyo is promoting the University of Tokyo Atacama Observatory Project, which is to construct an infrared-optimized 6.5m telescope at the summit of Co. Chajnantor (5640m altitude) in northern Chile. The high altitude and dry climate (PWV-0.5mm) realize transparent atmosphere in the infrared wavelength. The project is now approaching the final phase of the construction. Production of major components are almost completed: Production and preassembly test of a telescope mount and dome enclosure have been completed in Japan, and they are being transported to Chile. Three mirrors, the 6.5m primary, 0.9m secondary, and 1.1m-0.75m tertiary mirrors and their support systems have been all completed and tested in the USA. An aluminizing chamber have been fabricated in China, and its tests have been carried out in Japan. Development of two facility instruments, SWIMS and MIMIZUKU, are also completed. They were transported to the Subaru telescope, successfully saw the first light in 2018, and are confirmed to have the performance as designed. On-site construction work at the summit is now underway. Expansion of a summit access road from the ALMA concession was completed in 2019. Installation of foundation will follow, and then erection of the dome enclosure and a control building. The construction works are delayed by COVID-19, and we expect to complete the dome enclosure by Q3 of 2021. The telescope will be installed inside the dome and see the engineering first light by early 2022. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only.Immediate accessThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

The University of Tokyo Atacama Observatory 6.5m telescope: Project status 2022

The University of Tokyo Atacama Observatory (TAO) is a project to build and operate an infrared-optimized 6.5m telescope at the summit of Cerro Chajnantor (5640 m.a.s.l). This is promoted by Institute of Astronomy, Graduate School of Science, the University of Tokyo in collaboration with many universities and institutes. The project is now approaching the final phase of the construction. Production of major components are almost completed. The primary mirror fabricated by Steward Observatory Richard F. Caris Mirror Lab in the University of Arizona was temporarily assembled in its support system and confirmed its performance by the optical test in the laboratory. The telescope mount, the enclosure system, and the mirror coating system were fabricated in Japan and already shipped to Chile. They are now stored in an open yard located in the foot area of Cerro Chajanator. The expansion of the summit access road, the summit leveling, the foundation work was completed. Now the construction work of the summit facilities is on-going. TAO will equip three instruments in early science phase. A near-infrared instrument SWIMS is completed, and now used as a PI-type instrument of Subaru telescope. A near-infrared spectrograph NICE which was used on the 1.6m Pirka telescope in Japan is being refurbished for TAO. A mid-infrared instrument MIMIZUKU successfully saw the first light on Subaru telescope and is being prepared for TAO in Japan. We expect to start science operation in FY2023. © 2022 SPIE.Immediate accessThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]