2,560 research outputs found
Design of a Torque Current Generator for Strapdown Gyroscopes
The design, analysis, and experimental evaluation of an optimum performance torque current generator for use with strapdown gyroscopes, is presented. Among the criteria used to evaluate the design were the following: (1) steady-state accuracy; (2) margins of stability against self-oscillation; (3) temperature variations; (4) aging; (5) static errors drift errors, and transient errors, (6) classical frequency and time domain characteristics; and (7) the equivalent noise at the input of the comparater operational amplifier. The DC feedback loop of the torque current generator was approximated as a second-order system. Stability calculations for gain margins are discussed. Circuit diagrams are shown and block diagrams showing the implementation of the torque current generator are discussed
Thermal barrier coating life prediction model
The objectives of this program are to determine the predominant modes of degradation of a plasma sprayed thermal barrier coating system, and then to develop and verify life prediction models accounting for these degradation modes. The program is divided into two phases, each consisting of several tasks. The work in Phase 1 is aimed at identifying the relative importance of the various failure modes, and developing and verifying life prediction model(s) for the predominant model for a thermal barrier coating system. Two possible predominant failure mechanisms being evaluated are bond coat oxidation and bond coat creep. The work in Phase 2 will develop design-capable, causal, life prediction models for thermomechanical and thermochemical failure modes, and for the exceptional conditions of foreign object damage and erosion
Global Optimization by Energy Landscape Paving
We introduce a novel heuristic global optimization method, energy landscape
paving (ELP), which combines core ideas from energy surface deformation and
tabu search. In appropriate limits, ELP reduces to existing techniques. The
approach is very general and flexible and is illustrated here on two protein
folding problems. For these examples, the technique gives faster convergence to
the global minimum than previous approaches.Comment: to appear in Phys. Rev. Lett. (2002
Farm-Tractor-Related Fatalities -- Kentucky, 1994
Fatalities associated with farm tractors are the most common cause of work-related death in the U.S. agricultural industry (1). To characterize farm-tractor-related fatalities in Kentucky, the Kentucky Fatality Assessment and Control Evaluation (KY FACE) Project studied all fatal farm injuries occurring among persons in that state during 1994, the initial year of operation for FACE in Kentucky. This report summarizes the results of that study
Behavior of clock-sampling mutual network synchronization in wireless sensor networks: Convergence and security
Aerosynthesis: Growth of Vertically-aligned Carbon Nanofibres with Air DC Plasma
Vertically-aligned carbon nanofibres (VACNFs) have been synthesized in a mixture of acetone and air using catalytic DC plasma-enhanced chemical vapour deposition. Typically, ammonia or hydrogen is used as an etchant gas in the mixture to remove carbon that otherwise passivates the catalyst surface and impedes growth. Our demonstration of the use of air as the etchant gas opens up the possibility that ion etching could be sufficient to maintain the catalytic activity state during synthesis. It also demonstrates a path toward growing VACNFs in the open atmosphere
Recommended from our members
Evaluation of a hydrogen sensor for nuclear reactor containment monitoring
Measurement of hydrogen concentration in containment atmospheres in nuclear plants is a key safety capability. Current technologies require extensive sampling systems and subsequent maintenance and calibration costs can be very expensive. A new hydrogen sensor has been developed that is small and potentially inexpensive to install and maintain. Its size and low power requirement make it suitable in distributed systems for pinpointing hydrogen buildup. This paper will address the first phase of a testing program conducted to evaluate this sensor for operation in reactor containments
Constraints on a second planet in the WASP-3 system
There have been previous hints that the transiting planet WASP-3 b is
accompanied by a second planet in a nearby orbit, based on small deviations
from strict periodicity of the observed transits. Here we present 17 precise
radial velocity measurements and 32 transit light curves that were acquired
between 2009 and 2011. These data were used to refine the parameters of the
host star and transiting planet. This has resulted in reduced uncertainties for
the radii and masses of the star and planet. The radial-velocity data and the
transit times show no evidence for an additional planet in the system.
Therefore, we have determined the upper limit on the mass of any hypothetical
second planet, as a function of its orbital period.Comment: Accepted for publication in The Astronomical Journa
- …