Dynamic FOV visible light communications receiver for dense optical networks

This study explores how the field-of-view (FOV) of a visible light communications (VLCs) receiver can be manipulated to realise the best signal-to-noise ratio (SNR) while supporting device mobility and optimal access point (AP) selection. The authors propose a dynamic FOV receiver that changes its aperture according to receiver velocity, location, and device orientation. The D-FOV technique is evaluated through modelling, analysis, and experimentation in an indoor environment comprised of 15 VLC APs. The proposed approach is also realised as an algorithm that is studied through analysis and simulation. The results of the study indicate the efficacy of the approach including a 3X increase in predicted SNR over static FOV approaches based on measured received signal strength in the testbed. Additionally, the collected data reveal that D-FOV increases effectiveness in the presence of noise. Finally, the study describes the tradeoffs among the number of VLC sources, FOV, user device velocity, and SNR as a performance metric.Accepted manuscrip

Single-stage, low-noise, advanced technology fan. Volume 4: Fan aerodynamics. Section 1: Results and analysis

Test results at design speed show fan total pressure ratio, weight flow, and adiabatic efficiency to be 2.2, 2.9, and 1.8% lower than design goal values. The hybrid acoustic inlet (which utilizes a high throat Mach number and acoustic wall treatment for noise suppression) demonstrated total pressure recoveries of 98.9% and 98.2% at takeoff and approach. Exhaust duct pressure losses differed between the hardwall duct and treated duct with splitter by about 0.6% to 2.0% in terms of fan exit average total pressure (depending on operating condition). When the measured results were used to estimate pressure losses, a cruise sfc penalty of 0.68%, due to the acoustically treated duct, was projected

Further detections of OH masers in carbon stars with silicate features

A sample of J-type carbon stars was searched for OH maser emission. The new detection of three OH lines towards two silicate carbon stars is reported. In V778 Cyg, previously known as the main-lines (1665 and 1667 MHz) maser source, the satellite 1612 MHz emission was discovered while in NSV 2814 the main OH lines were detected. The presence of OH maser lines confirms the former suggestion that oxygen-rich material is located in the vicinity ($\approx$ $10^{15-16}$ cm) of silicate carbon stars.Comment: LaTeX2e, 4 pages with 2 figure

Single stage, low noise, advanced technology fan. Volume 1: Aerodynamic design

The aerodynamic design for a half-scale fan vehicle, which would have application on an advanced transport aircraft, is described. The single stage advanced technology fan was designed to a pressure ratio of 1.8 at a tip speed of 503 m/sec 11,650 ft/sec). The fan and booster components are designed in a scale model flow size convenient for testing with existing facility and vehicle hardware. The design corrected flow per unit annulus area at the fan face is 215 kg/sec sq m (44.0 lb m/sec sq ft) with a hub-tip ratio of 0.38 at the leading edge of the fan rotor. This results in an inlet corrected airflow of 117.9 kg/sec (259.9 lb m/sec) for the selected rotor tip diameter if 90.37 cm (35.58 in.). The variable geometry inlet is designed utilizing a combination of high throat Mach number and acoustic treatment in the inlet diffuser for noise suppression (hybrid inlet). A variable fan exhaust nozzle was assumed in conjunction with the variable inlet throat area to limit the required area change of the inlet throat at approach and hence limit the overall diffusion and inlet length. The fan exit duct design was primarily influenced by acoustic requirements, including length of suppressor wall treatment; length, thickness and position on a duct splitter for additional suppressor treatment; and duct surface Mach numbers

Can students' feedback literacy be improved? A scoping review of interventions

Student feedback literacy has been the subject of much conceptual literature; however, relatively little intervention research has investigated how and if it can be developed. Further, no evaluation of the current empirical literature has been conducted to assess which elements of feedback literacy can be successfully improved in practice, and which elements need further investigation. This paper seeks to explore how different aspects of feedback literacy have been developed in higher education. A scoping review was conducted to address the foci, nature and success of interventions. The review found evidence that educational interventions enhanced feedback literacy in students, such as managing perceptions and attitudes, and having more confidence and agency in the feedback process. While some interventions have an effect on influencing student feedback literacy, both improved study design and intervention design are required to make the most of future feedback literacy interventions

High performance photonic microwave filters based on a 50GHz optical soliton crystal Kerr micro-comb

We demonstrate a photonic radio frequency (RF) transversal filter based on an integrated optical micro-comb source featuring a record low free spectral range of 49 GHz yielding 80 micro-comb lines across the C-band. This record-high number of taps, or wavelengths for the transversal filter results in significantly increased performance including a QRF factor more than four times higher than previous results. Further, by employing both positive and negative taps, an improved out-of-band rejection of up to 48.9 dB is demonstrated using Gaussian apodization, together with a tunable centre frequency covering the RF spectra range, with a widely tunable 3-dB bandwidth and versatile dynamically adjustable filter shapes. Our experimental results match well with theory, showing that our transversal filter is a competitive solution to implement advanced adaptive RF filters with broad operational bandwidths, high frequency selectivity, high reconfigurability, and potentially reduced cost and footprint. This approach is promising for applications in modern radar and communications systems.Comment: 19 pages, 12 figures, 107 reference

Propfan Test Assessment (PTA)

The objectives of the Propfan Test Assessment (PTA) Program were to validate in flight the structural integrity of large-scale propfan blades and to measure noise characteristics of the propfan in both near and far fields. All program objectives were met or exceeded, on schedule and under budget. A Gulfstream Aerospace Corporation GII aircraft was modified to provide a testbed for the 2.74m (9 ft) diameter Hamilton Standard SR-7 propfan which was driven by a 4475 kw (600 shp) turboshaft engine mounted on the left-hand wing of the aircraft. Flight research tests were performed for 20 combinations of speed and altitude within a flight envelope that extended to Mach numbers of 0.85 and altitudes of 12,192m (40,000 ft). Propfan blade stress, near-field noise on aircraft surfaces, and cabin noise were recorded. Primary variables were propfan power and tip speed, and the nacelle tilt angle. Extensive low altitude far-field noise tests were made to measure flyover and sideline noise and the lateral attenuation of noise. In coopertion with the FAA, tests were also made of flyover noise for the aircraft at 6100m (20,000 ft) and 10,668m (35,000 ft). A final series of tests were flown to evaluate an advanced cabin wall noise treatment that was produced under a separate program by NASA-Langley Research Center

Four-Hundred-and-Ninety-Million-Year Record of Bacteriogenic Iron Oxide Precipitation at Sea-Floor Hydrothermal Vents

Fe oxide deposits are commonly found at hydrothermal vent sites at mid-ocean ridge and back-arc sea floor spreading centers, seamounts associated with these spreading centers, and intra-plate seamounts, and can cover extensive areas of the seafloor. These deposits can be attributed to several abiogenic processes and commonly contain micron-scale filamentous textures. Some filaments are cylindrical casts of Fe oxyhydroxides formed around bacterial cells and are thus unquestionably biogenic. The filaments have distinctive morphologies very like structures formed by neutrophilic Fe oxidizing bacteria. It is becoming increasingly apparent that Fe oxidizing bacteria have a significant role in the formation of Fe oxide deposits at marine hydrothermal vents. The presence of Fe oxide filaments in Fe oxides is thus of great potential as a biomarker for Fe oxidizing bacteria in modern and ancient marine hydrothermal vent deposits. The ancient analogues of modern deep-sea hydrothermal Fe oxide deposits are jaspers. A number of jaspers, ranging in age from the early Ordovician to late Eocene, contain abundant Fe oxide filamentous textures with a wide variety of morphologies. Some of these filaments are like structures formed by modern Fe oxidizing bacteria. Together with new data from the modern TAG site, we show that there is direct evidence for bacteriogenic Fe oxide precipitation at marine hydrothermal vent sites for at least the last 490 Ma of the Phanerozoic

Laminin Potentiates Differentiation of PCC4uva Embryonal Carcinoma into Neurons

The embryonal carcinoma PCC4uva differentiates into neurons in response to treatment with retinoic acid and dbcAMP. We used this in vitro model system to study the effects of laminin on early neural differentiation. Laminin substrata markedly potentiate neural differentiation of retinoic acid and dbcAMP-treated cultures. Only laminin induced more rapid neural cell body clustering, neurite growth and neurite fasciculation as compared to type IV collagen, type I collagen, and fibronectin substrata. Exogenous laminin substrata promoted greater cell attachment, cellular spreading and growth to confluence than type IV collagen, type I collagen, fibronectin and glass substrata. Laminin-induced effects were inhibited by addition of laminin antibodies or the synthetic laminin-derived peptide Ile-Gly-Ser-Arg-NH2 (YIGSR-NH2). Treatment with YIGSR-NH2 also inhibited neural differentiation in the absence of exogenous laminin substrata, whereas synthetic peptides containing the RGD sequence and a control peptide YIGSK-NH2 showed no inhibitory effects. These results are consistent with the hypothesis that specific interactions between an early differentiating cell population(s) and extracellular laminin are required during neural differentiation

Hot melt adhesive attachment pad

A hot melt adhesive attachment pad for releasably securing distinct elements together is described which is particularly useful in the construction industry or a spatial vacuum environment. The attachment pad consists primarily of a cloth selectively impregnated with a charge of hot melt adhesive, a thermo-foil heater, and a thermo-cooler. These components are securely mounted in a mounting assembly. In operation, the operator activates the heating cycle transforming the hot melt adhesive to a substantially liquid state, positions the pad against the attachment surface, and activates the cooling cycle solidifying the adhesive and forming a strong, releasable bond