Sulfur and oxygen isotope compositions of Upper Triassic sulfates from Northerm Apennines (Italy): palaeogeographic and hidrogeochemical implications

Upper Triassic bedded evaporite sulfate of the Burano Formation outcropping at Cerreto Pass between Tuscany and Emilia-Romagna in the Northern Apennines were analyzed for sulfur and oxygen isotope compositions, yielding d34S and d18O values of 15.5±0.4‰ and 10.8±1.2‰, respectively (mean ±99% confidence intervals). Combining these values with those of other Burano Formation sulfate deposits along the Apennine chain, mean for d34S and d18O values are obtained (15.2±0.2‰ and 10.9±0.5‰, respectively). These isotopic signatures are interpreted as preserved primary features, despite the fact that the Burano Formation underwent anchizone to epizone metamorphism during the Apennine orogenesis. An overall d18O value of 10.9±1.5‰ (mean ± pooled standard deviation), obtained by combining consistent sets of data from Italy and Spain, closely approaches that of gypsum deposited from the Tethys ocean during the Late Triassic. In addition, reviewing the isotope data published on Late Triassic evaporite sulfates from the Mediterranean area and abroad, several d34S values appear to be lower than the inferred primary isotopic signature, and seemly decrease from East to West in the Mediterranean region, suggesting a similar trend for the Tethys ocean sulfate. Possibly, 34S-depleted sulfate entered the ocean through oxidation of volcanic SO2 emitted in the atmosphere and degassed from the seafloor during the development of Late Triassic rifting. On the other hand, positive shifts of d34S and d18O values also occur, defining a common trend that may be related to synsedimentary biological effects or post-depositional metasomatic-metamorphic effects, the latter affecting particularly the d18O signature. Therefore, the d34S and d18O signatures of evaporite sulfate may provide a like “slide-rule” diagram to distinguish between isotopic effects related to biological or abiological processes, thus contributing to the reconstruction of paleoenvironments and paleogeographic settings. Based on the d34S-d18O “slide-rule”, the isotopic composition of sulfate dissolved in spring and stream waters of northern Tuscany was interpreted in terms of origin of the sulfate and modifying processes in solution. It was concluded that sulfate in springs derives from Upper Triassic evaporite existing locally at depth (Burano Formation), whereas sulfate in streams is manifestly a mixture of Burano Formation sulfate with supergene sulfate from oxidation of sulfide in the rocks. In sulfurous springs, both sulfur and oxygen isotope fractionations with respect to the source sulfate signatures may be ascribed to bacterial effects. However, the oxygen isotope exchange of sulfate with water should have been a very minor process as supported by the nearsurface temperature values estimated by sulfate-water oxygen isotope thermometry

Chemical and stable isotope composition (18O/16O, 2H/1H) of formation waters from the Carabobo Oilfield, Venezuela

In this short note, we present the first data on stable isotope composition of the oilfield waters from Carabobo area of the Faja Petrolífera del Orinoco “Hugo Chávez” (Orinoco Oil Belt). From a chemical point of view, the formation waters show a main Na-Cl level (TDS up to 30g/l) with a dilution trend toward Na-HCO3 composition (down to 1g/l). Until now, such a clear net chemical compositional trend was ascribed to a meteoric dilution (fresh/ brackish bicarbonate) of the seawater endmember (the saltiest chloride). The isotope results of this study reveal that the seawater mother water was modified during a high-temperature thrusting event (120–125°C), forming 18O-enriched diagenetic water (up to +4‰), which was diluted in recent times by glacial meltwater and presentday meteoric water. The hypothetical presence of flood by a meteoric paleo-water also offers new hints to explain the low API gravity (<10°API biodegraded, extra heavy oil) and composition of the local crude

Understanding the origin and mixing of deep fluids in shallow aquifers and possible implications for crustal deformation studies. San Vittorino plain, Central Apennines

Expanding knowledge about the origin and mixing of deep fluids and the water–rock–gas interactions in aquifer systems can represent an improvement in the comprehension of crustal deformation processes. An analysis of the deep and meteoric fluid contributions to a regional groundwater circulation model in an active seismic area has been carried out. We performed two hydrogeochemical screenings of 15 springs in the San Vittorino Plain (central Italy). Furthermore, we updated the San Vittorino Plain structural setting with a new geological map and cross-sections, highlighting how and where the aquifers are intersected by faults. The application of Na-Li geothermometers, coupled with trace element and gas analyses, agrees in attributing the highest temperatures (>150◦C), the greatest enrichments in Li (124.3 ppb) and Cs (>5 ppb), and traces of mantle-derived He (1–2%) to springs located in correspondence with high-angle faults (i.e., S5, S11, S13, and S15). This evidence points out the role of faults acting as vehicles for deep fluids into regional carbonate aquifers. These results highlight the criteria for identifying the most suitable sites for monitoring variations in groundwater geochemistry due to the uprising of deep fluids modulated by fault activity to be further correlated with crustal deformation and possibly with seismicity

Hydrodynamics in evaporate-bearing fine-grained successions investigated through an interdisciplinary approach : A test study in southern Italy-hydrogeological behaviour of heterogeneous low-permeability media

Messinian evaporates are widely distributed in the Mediterranean Sea as outcropping sediments in small marginal basins and in marine cores. Progressive filling of subbasins led to the formation of complex aquifer systems in different regions where hypersaline and fresh water coexist and interact in different manner. It also generates a significant diversification of groundwater hydrochemical signature and different microbial communities. In the case study, the hydrogeology and hydrochemistry of the whole system are influenced by good hydraulic connection between the shallower pyroclastic horizon and the underlying evaporate-bearing fine-grained Messinian succession. This is demonstrated by the merge of hydrogeological, chemical, isotopic, and microbiological data. No mixing with deep ascending waters has been observed. As shown by geophysical, hydraulic, and microbiological investigations, the hydraulic heterogeneity of the Messinian bedrock, mainly due to karstified evaporitic interstrata/lenses, causes the hydraulic head to significantly vary with depth. Somewhere, the head increases with the depth's increase and artesian flow conditions are locally observed. Moreover, the metagenomic investigations demonstrated the existence of a poor hydraulic connection within the evaporate-bearing fine-grained succession at metric and decametric scales, therefore leading to a patchwork of geochemical (and microbiological) subenvironments

Optical Limiter Based on PT-Symmetry Breaking of Reflectionless Modes

The application of parity-time (PT) symmetry in optics, especially PT-symmetry breaking, has attracted considerable attention as a novel approach to controlling light propagation. Here, we report optical limiting by two coupled optical cavities with a PT-symmetric spectrum of reflectionless modes. The optical limiting is related to broken PT symmetry due to light-induced changes in one of the cavities. Our experimental implementation is a three-mirror resonator of alternating layers of ZnS and cryolite with a PT-symmetric spectral degeneracy of two reflectionless modes. The optical limiting is demonstrated by measurements of single 532-nm 6-ns laser pulses. At fluences below 10 mJ/cm2, the multilayer exhibits a flat-top passband at 532 nm. At higher fluences, laser heating combined with the thermo-optic effect in ZnS leads to cavity detuning and PT-symmetry breaking of the reflectionless modes. As a result, the entire multilayer structure quickly becomes highly reflective, protecting itself from laser-induced damage. The cavity detuning mechanism can differ at much higher limiting thresholds and include nonlinearity.Comment: 17 pages, 5 figure

Information flows at inter-team boundaries in agile information systems development

Agile software development methods are being used on larger projects thus the study of inter-team communication are becoming an important topic of interest for researchers. This research addresses inter-team communication by exploring the tools and three different boundaries, inter-team, team and customers, and geographically separated teams. In this research, we gathered data from semi-structured face-to-face interviews which were analyzed following the grounded theory approach. Our study reveals consensus from different teams on the importance of virtual Kanban boards. Also, some teams members tend to adapt to other teams’ preferred communication tool. We observed challenges around interdependent user stories among the different teams and highlighted the problems that rise at the different boundaries. Keywords: agile information system development • inter-team communication • agile team boundary • communication • agile methods • cooperating agile team

Performance Of A Liquid Argon Time Projection Chamber Exposed To The WANF Neutrino Beam

We present the results of the first exposure of a Liquid Argon TPC to a multi-GeV neutrino beam. The data have been collected with a 50 liters ICARUS-like chamber located between the CHORUS and NOMAD experiments at the CERN West Area Neutrino Facility (WANF). We discuss both the instrumental performance of the detector and its capability to identify and reconstruct low multiplicity neutrino interactions.Comment: 14 pages, 12 figures. Submitted for publication to Physical Review

Towards global spaceborne lidar biomass: Developing and applying boreal forest biomass models for ICESat-2 laser altimetry data

Space-based laser altimetry has revolutionized our capacity to characterize terrestrial ecosystems through the direct observation of vegetation structure and the terrain beneath it. Data from NASA's ICESat-2 mission provide the first comprehensive look at canopy structure for boreal forests from space-based lidar. The objective of this research was to create ICESat-2 aboveground biomass density (AGBD) models for the global entirety of boreal forests at a 30 m spatial resolution and apply those models to ICESat-2 data from the 2019–2021 period. Although limited in dense canopy, ICESat-2 is the only space-based laser altimeter capable of mapping vegetation in northern latitudes. Along each ICESat-2 orbit track, ground and vegetation height is captured with additional modeling required to characterize biomass. By implementing a similar methodology of estimating AGBD as GEDI, ICESat-2 AGBD estimates can complement GEDI's estimates for a full global accounting of aboveground carbon. Using a suite of field measurements with contemporaneous airborne lidar data over boreal forests, ICESat-2 photons were simulated over many field sites and the impact of two methods of computing relative height (RH) metrics on AGBD at a 30 m along-track spatial resolution were tested; with and without ground photons. AGBD models were developed specifically for ICESat-2 segments having land cover as either Evergreen Needleleaf or Deciduous Broadleaf Trees, whereas a generalized boreal-wide AGBD model was developed for ICESat-2 segments whose land cover was neither. Applying our AGBD models to a set of over 19 million ICESat-2 observations yielded a 30 m along-track AGBD product for the pan-boreal. The ability demonstrated herein to calculate ICESat-2 biomass estimates at a 30 m spatial resolution provides the scientific underpinning for a full, spatially explicit, global accounting of aboveground biomass

Strong Correspondence in Evapotranspiration and Carbon Dioxide Fluxes Between Different Eddy Covariance Systems Enables Quantification of Landscape Heterogeneity in Dryland Fluxes

This is the final version. Available on open access from Wiley via the DOI in this recordData Availability Statement: Post-processed half-hourly data from AmeriFlux systems are available at https://ameriflux.lbl.gov/login/?redirect_to=/data/download-data/ and the data from the low-frequency systems are archived with the NERC Environmental Information Data Centre (https://doi.org/10.5285/e96466c3-5b67-41b0-9252-8f8f393807d7). The code repository is archived on Zenodo (https://doi.org/10.5281/zenodo.4730586).The eddy covariance method is widely used to investigate fluxes of energy, water, and carbon dioxide at landscape scales, providing important information on how ecological systems function. Flux measurements quantify ecosystem responses to environmental perturbations and management strategies, including nature-based climate-change mitigation measures. However, due to the high cost of conventional instrumentation, most eddy covariance studies employ a single system, limiting spatial representation to the flux footprint. Insufficient replication may be limiting our understanding of ecosystem behavior. To address this limitation, we deployed eight lower-cost eddy covariance systems in two clusters around two conventional eddy covariance systems in the Chihuahuan Desert of North America for a period of 2 years. These dryland settings characterized by large temperature variations and relatively low carbon dioxide fluxes represented a challenging setting for eddy covariance. We found very good closure of energy and water balance across all systems (within ±9% of unity). We found very good correspondence between the lower-cost and conventional systems' fluxes of sensible heat (with concordance correlation coefficient (CCC) of ≥0.87), latent energy (evapotranspiration; CCC ≥ 0.89), and useful correspondence in the net ecosystem exchange ((NEE); with CCC ≥ 0.4) at the daily temporal resolution. Relative to the conventional systems, the low-frequency systems were characterized by a higher level of random error, particularly in the NEE fluxes. Lower-cost systems can enable wider deployment affording better replication and sampling of spatiotemporal variability at the expense of greater measurement noise that might be limiting for certain applications. Replicated eddy covariance observations may be useful when addressing gaps in the existing monitoring of critical and underrepresented ecosystems and for measuring areas larger than a single flux footprint.Natural Environment Research Council (NERC)National Science Foundation (NSF)Department of EnergyOppenheimer Programme in African Landscape System