A Comparative Environmental Assessment of Heat Pumps and Gas Boilers towards a Circular Economy in the UK

This research compares the potential environmental impacts of heat pumps with gas boilers and scenario analysis through utilising the life cycle approach. The study analyses the current situation with the baseline model and assesses future applications with Circular Economy (CE), Resource Efficiency (RE) and Limited Growth (LG) scenarios. Then, hybrid applications of low-carbon technologies and different manufacturing scenarios are investigated according to baseline and CE scenarios. Our results show that the use and manufacturing phases are responsible for 74% and 14% of all environmental impacts on average as expected. Even though the electricity mix of the UK has decarbonised substantially during the last decade, heat pumps still have higher lifetime impacts than gas boilers in all environmental categories except climate change impact. The carbon intensity of heat pumps is much lower than gas boilers with 0.111 and 0.097 kg CO2e for air source heat pumps and ground source heat pumps, whereas the boiler stands as 0.241 kg CO2e. Future scenarios offer significant reductions in most of the impact categories. The CE scenario has the highest potential with a 44% reduction for heat pumps and 27% for gas boilers on average. RE and LG scenarios have smaller potential than the CE scenario, relatively. However, several categories expect an increase in future scenarios such as freshwater ecotoxicity, marine ecotoxicity and metal depletion categories. High deployment of offshore wind farms will have a negative impact on these categories; therefore, a comprehensive approach through a market introduction programme should be provided at the beginning before shifting from one technology to another. The 50% Hybrid scenario results expect a reduction of 24% and 20% on average for ASHP and GSHP, respectively, in the baseline model. The reduction is much lower in the CE scenario, with only a 2% decrease for both heat pumps because of the reduction in heat demand in the future. These results emphasise that even though the importance of the use phase is significant in the baseline model, the remaining phases will play an important role to achieve Net-Zero targets in the future

Circular economy strategies for electric vehicle batteries reduce raw material reliance

The wide adoption of lithium-ion batteries used in electric vehicles will require increased natural resources for the automotive industry. The expected rapid increase in batteries could result in new resource challenges and supply-chain risks. To strengthen the resilience and sustainability of automotive supply chains and reduce primary resource requirements, circular economy strategies are needed. Here we illustrate how these strategies can reduce the extraction of primary raw materials, that is, cobalt supplies. Material flow analysis is applied to understand current and future flows of cobalt embedded in electric vehicle batteries across the European Union. A reference scenario is presented and compared with four strategies: technology-driven substitution and technology-driven reduction of cobalt, new business models to stimulate battery reuse/recycling and policy-driven strategy to increase recycling. We find that new technologies provide the most promising strategies to reduce the reliance on cobalt substantially but could result in burden shifting such as an increase in nickel demand. To avoid the latter, technological developments should be combined with an efficient recycling system. We conclude that more-ambitious circular economy strategies, at both government and business levels, are urgently needed to address current and future resource challenges across the supply chain successfully

The Circular Economy: What, Why, How and Where

This paper was prepared as a background document for an OECD/EC high-level expert workshop on “Managing the transition to a circular economy in regions and cities” held on 5 July 2019 at the OECD Headquarters in Paris, France. It sets a basis for reflection and discussion. The background paper should not be reported as representing the official views of the European Commission, the OECD or one of its member countries. The opinions expressed and arguments employed are those of the author(s)

Study of USH1 Splicing Variants through Minigenes and Transcript Analysis from Nasal Epithelial Cells

Usher syndrome type I (USH1) is an autosomal recessive disorder characterized by congenital profound deafness, vestibular areflexia and prepubertal retinitis pigmentosa. The first purpose of this study was to determine the pathologic nature of eighteen USH1 putative splicing variants found in our series and their effect in the splicing process by minigene assays. These variants were selected according to bioinformatic analysis. The second aim was to analyze the USH1 transcripts, obtained from nasal epithelial cells samples of our patients, in order to corroborate the observed effect of mutations by minigenes in patient’s tissues. The last objective was to evaluate the nasal ciliary beat frequency in patients with USH1 and compare it with control subjects. In silico analysis were performed using four bioinformatic programs: NNSplice, Human Splicing Finder, NetGene2 and Spliceview. Afterward, minigenes based on the pSPL3 vector were used to investigate the implication of selected changes in the mRNA processing. To observe the effect of mutations in the patient’s tissues, RNA was extracted from nasal epithelial cells and RT-PCR analyses were performed. Four MYO7A (c.470G>A, c.1342_1343delAG, c.5856G>A and c.3652G>A), three CDH23 (c.2289+1G>A, c.6049G>A and c.8722+1delG) and one PCDH15 (c.3717+2dupTT) variants were observed to affect the splicing process by minigene assays and/or transcripts analysis obtained from nasal cells. Based on our results, minigenes are a good approach to determine the implication of identified variants in the mRNA processing, and the analysis of RNA obtained from nasal epithelial cells is an alternative method to discriminate neutral Usher variants from those with a pathogenic effect on the splicing process. In addition, we could observe that the nasal ciliated epithelium of USH1 patients shows a lower ciliary beat frequency than control subjects

The impact and effectiveness of the general public wearing masks to reduce the spread of pandemics in the UK: a multidisciplinary comparison of single-use masks versus reusable face masks

During the coronavirus (COVID-19) pandemic, the UK government mandated the use of face masks in various public settings and recommended the use of reusable masks to combat shortages of medically graded single-use masks in healthcare. To assist decision-making on the choice of masks for future pandemics, where shortages may not be a contributing factor, the University College London (UCL) Plastic Waste Innovation Hub has carried out a multidisciplinary comparison between single-use and reusable masks based on their anatomy, standalone effectiveness, behavioural considerations, environmental impact and costs. Although current single-use masks have a higher standalone effectiveness against bacteria and viruses, studies show that reusable masks have adequate performance in slowing infection rates of respiratory viruses. Material flow analysis (MFA), life cycle assessment (LCA) and cost comparison show that reusable masks have a lower environmental and economic impact than single-use masks. If every person in the UK uses one single-use mask each day for a year, it will create a total of 124,000 tonnes of waste, 66,000 tonnes of which would be unrecyclable contaminated plastic waste (the masks), with the rest being the recyclable packaging typically used for transportation and distribution of masks. Using reusable masks creates >85% less waste, generates 3.5 times lower impact on climate change and incurs 3.7 times lower costs. Further behavioural research is necessary to understand the extent and current practices of mask use; and how these practices affect mask effectiveness in reducing infection rates. Wearing single-use masks may be preferred over reusable masks due to perceptions of increased hygiene and convenience. Understanding behaviour towards the regular machine-washing of reusable masks for their effective reuse is key to maximise their public health benefits and minimise environmental and economic costs

Measurement of J/ψ production in association with a W ± boson with pp data at 8 TeV

A measurement of the production of a prompt J/ψ meson in association with a W± boson with W± → μν and J/ψ → μ+μ− is presented for J/ψ transverse momenta in the range 8.5–150 GeV and rapidity |yJ/ψ| < 2.1 using ATLAS data recorded in 2012 at the LHC. The data were taken at a proton-proton centre-of-mass energy of s = 8 TeV and correspond to an integrated luminosity of 20.3 fb−1. The ratio of the prompt J/ψ plus W± cross-section to the inclusive W± cross-section is presented as a differential measurement as a function of J/ψ transverse momenta and compared with theoretical predictions using different double-parton-scattering cross-sections. [Figure not available: see fulltext.]

Z boson production in Pb+Pb collisions at √Snn = 5.02 TeV measured by the ATLAS experiment

The production yield of Z bosons is measured in the electron and muon decay channels in Pb+Pb collisions at √S = 5.02 TeV with the ATLAS detector. Data from the 2015 LHC run corresponding to an integrated luminosity of 0.49 nb are used for the analysis. The Z boson yield, normalised by the total number of minimum-bias events and the mean nuclear thickness function, is measured as a function of dilepton rapidity and event centrality. The measurements in Pb+Pb collisions are compared with similar measurements made in proton-proton collisions at the same centre-of-mass energy. The nuclear modification factor is found to be consistent with unity for all centrality intervals. The results are compared with theoretical predictions obtained at next-to-leading order using nucleon and nuclear parton distribution functions. The normalised Z boson yields in Pb+Pb collisions lie 1-3σ above the predictions. The nuclear modification factor measured as a function of rapidity agrees with unity and is consistent with a next-to-leading-order QCD calculation including the isospin effect. nn -

Search for flavour-changing neutral currents in processes with one top quark and a photon using 81 fb−1 of pp collisions at s=13TeV with the ATLAS experiment

A search for flavour-changing neutral current (FCNC) events via the coupling of a top quark, a photon, and an up or charm quark is presented using 81 fb−1 of proton–proton collision data taken at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC. Events with a photon, an electron or muon, a b-tagged jet, and missing transverse momentum are selected. A neural network based on kinematic variables differentiates between events from signal and background processes. The data are consistent with the background-only hypothesis, and limits are set on the strength of the tqγ coupling in an effective field theory. These are also interpreted as 95% CL upper limits on the cross section for FCNC tγ production via a left-handed (right-handed) tuγ coupling of 36 fb (78 fb) and on the branching ratio for t→γu of 2.8×10−5 (6.1×10−5). In addition, they are interpreted as 95% CL upper limits on the cross section for FCNC tγ production via a left-handed (right-handed) tcγ coupling of 40 fb (33 fb) and on the branching ratio for t→γc of 22×10−5 (18×10−5)