Análise de processos de oxidação com Trans-LC para fabricação de células solares

Apesar do filme para passivação padrão da indústria de células solares atual ser SiNx, as últimas tendências do mercado fazem com que seja necessário reavaliar o SiO2 para passivação das superfícies de células solares. Para crescer estes óxidos, no entanto, são necessárias etapas de processamento em altas temperaturas, que deixam as lâminas de silício suscetíveis a contaminações metálicas. Para evitar essa contaminação, o composto orgânico Trans-LC é utilizado para limpeza do tubo de oxidação. O objetivo deste trabalho é avaliar a eficácia deste composto para limpeza dos tubos e determinar a qualidade da passivação que os óxidos produzidos desta forma proporcionam para as lâminas de Si. Observou-se que as limpezas realizadas não foram capazes de prevenir a contaminação de lâminas de Si de alto tempo de vida inicial. Porém, o Trans-LC foi suficientemente eficaz para oxidações realizadas em lâminas de baixo tempo de vida dos portadores minoritários.Even though the standard film for passivation currently utilized in the silicon solar cell industry is SiNx, the late tendencies of the market make it necessary to reevaluate the SiO2 for surface passivation of solar cells. In order to grow these oxides, however, high-temperature processing steps are necessary, which leave the wafers susceptible to metallic contamination. To avoid this contamination, the organic compound Trans-LC is used to clean the oxidation tube. The goal of this work is to evaluate the efficacy of this compound for the tube cleaning and determine the passivation quality that the oxides produced this way provide to the Si wafers. It was observed that the cleanings were not capable to prevent the contamination of high initial lifetime Si wafers. However, the Trans-LC was sufficiently effective for oxidations realized on wafers with low initial minority carrier lifetime.Tema 4: Energía solar, conversión fotovoltaica.Facultad de Arquitectura y Urbanism

Influência do tempo de difusão de boro no campo retrodifusor seletivo de alumínio e boro em células solares de silício

O campo retrodifusor seletivo em células solares possibilita aumentar a eficiência e evita o abaulamento. O objetivo deste trabalho é analisar a influência do tempo de difusão de boro na formação do campo retrodifusor seletivo de alumínio e boro em células solares processadas em lâminas de silício Czochralski tipo p, grau solar. A difusão de boro foi implementada em toda a face posterior da lâmina e por serigrafia foi depositada a pasta de alumínio, somente nas trilhas metálicas. O processo de queima das pastas metálicas foi realizado em forno de esteira. Variou-se o tempo de difusão de boro de 10 a 30 minutos para a temperatura de difusão de 950 a 970 °C. Constatou-se que o melhor tempo de difusão depende da temperatura de difusão de boro e que a maior eficiência média, de (15,6 ± 0,1) %, foi obtida para a temperatura de 970 °C e tempo de difusão de 30 minutos.The selective back surface field in solar cells enables to increase the efficiency and avoid the bowing. The objective of this study is to analyze the influence of boron diffusion time in the formation of boron/aluminum selective back surface field. The solar cells were processed in solar grade Si-Cz wafers. The boron diffusion was performed in the whole rear face of the silicon wafer and the aluminum paste was deposited by screen printing, only in the metal fingers. The firing process of the metal pastes was performed in a belt furnace. The boron diffusion time was ranged from 10 to 30 minutes for the diffusion temperature from 950 °C to 970 °C. It was found that the better diffusion time depends on the boron diffusion temperature and the highest average efficiency of solar cells, of (15.6 ± 0.1) %, was obtained with the temperature of 970 °C and the diffusion time of 30 minutes.Tema 4: Energía solar, conversión fotovoltaica.Facultad de Arquitectura y Urbanism

Influência do tempo de difusão de boro no campo retrodifusor seletivo de alumínio e boro em células solares de silício

O campo retrodifusor seletivo em células solares possibilita aumentar a eficiência e evita o abaulamento. O objetivo deste trabalho é analisar a influência do tempo de difusão de boro na formação do campo retrodifusor seletivo de alumínio e boro em células solares processadas em lâminas de silício Czochralski tipo p, grau solar. A difusão de boro foi implementada em toda a face posterior da lâmina e por serigrafia foi depositada a pasta de alumínio, somente nas trilhas metálicas. O processo de queima das pastas metálicas foi realizado em forno de esteira. Variou-se o tempo de difusão de boro de 10 a 30 minutos para a temperatura de difusão de 950 a 970 °C. Constatou-se que o melhor tempo de difusão depende da temperatura de difusão de boro e que a maior eficiência média, de (15,6 ± 0,1) %, foi obtida para a temperatura de 970 °C e tempo de difusão de 30 minutos.The selective back surface field in solar cells enables to increase the efficiency and avoid the bowing. The objective of this study is to analyze the influence of boron diffusion time in the formation of boron/aluminum selective back surface field. The solar cells were processed in solar grade Si-Cz wafers. The boron diffusion was performed in the whole rear face of the silicon wafer and the aluminum paste was deposited by screen printing, only in the metal fingers. The firing process of the metal pastes was performed in a belt furnace. The boron diffusion time was ranged from 10 to 30 minutes for the diffusion temperature from 950 °C to 970 °C. It was found that the better diffusion time depends on the boron diffusion temperature and the highest average efficiency of solar cells, of (15.6 ± 0.1) %, was obtained with the temperature of 970 °C and the diffusion time of 30 minutes.Tema 4: Energía solar, conversión fotovoltaica.Facultad de Arquitectura y Urbanism

Análise de processos de oxidação com Trans-LC para fabricação de células solares

Apesar do filme para passivação padrão da indústria de células solares atual ser SiNx, as últimas tendências do mercado fazem com que seja necessário reavaliar o SiO2 para passivação das superfícies de células solares. Para crescer estes óxidos, no entanto, são necessárias etapas de processamento em altas temperaturas, que deixam as lâminas de silício suscetíveis a contaminações metálicas. Para evitar essa contaminação, o composto orgânico Trans-LC é utilizado para limpeza do tubo de oxidação. O objetivo deste trabalho é avaliar a eficácia deste composto para limpeza dos tubos e determinar a qualidade da passivação que os óxidos produzidos desta forma proporcionam para as lâminas de Si. Observou-se que as limpezas realizadas não foram capazes de prevenir a contaminação de lâminas de Si de alto tempo de vida inicial. Porém, o Trans-LC foi suficientemente eficaz para oxidações realizadas em lâminas de baixo tempo de vida dos portadores minoritários.Even though the standard film for passivation currently utilized in the silicon solar cell industry is SiNx, the late tendencies of the market make it necessary to reevaluate the SiO2 for surface passivation of solar cells. In order to grow these oxides, however, high-temperature processing steps are necessary, which leave the wafers susceptible to metallic contamination. To avoid this contamination, the organic compound Trans-LC is used to clean the oxidation tube. The goal of this work is to evaluate the efficacy of this compound for the tube cleaning and determine the passivation quality that the oxides produced this way provide to the Si wafers. It was observed that the cleanings were not capable to prevent the contamination of high initial lifetime Si wafers. However, the Trans-LC was sufficiently effective for oxidations realized on wafers with low initial minority carrier lifetime.Tema 4: Energía solar, conversión fotovoltaica.Facultad de Arquitectura y Urbanism

Análise de processos de oxidação com Trans-LC para fabricação de células solares

Apesar do filme para passivação padrão da indústria de células solares atual ser SiNx, as últimas tendências do mercado fazem com que seja necessário reavaliar o SiO2 para passivação das superfícies de células solares. Para crescer estes óxidos, no entanto, são necessárias etapas de processamento em altas temperaturas, que deixam as lâminas de silício suscetíveis a contaminações metálicas. Para evitar essa contaminação, o composto orgânico Trans-LC é utilizado para limpeza do tubo de oxidação. O objetivo deste trabalho é avaliar a eficácia deste composto para limpeza dos tubos e determinar a qualidade da passivação que os óxidos produzidos desta forma proporcionam para as lâminas de Si. Observou-se que as limpezas realizadas não foram capazes de prevenir a contaminação de lâminas de Si de alto tempo de vida inicial. Porém, o Trans-LC foi suficientemente eficaz para oxidações realizadas em lâminas de baixo tempo de vida dos portadores minoritários.Even though the standard film for passivation currently utilized in the silicon solar cell industry is SiNx, the late tendencies of the market make it necessary to reevaluate the SiO2 for surface passivation of solar cells. In order to grow these oxides, however, high-temperature processing steps are necessary, which leave the wafers susceptible to metallic contamination. To avoid this contamination, the organic compound Trans-LC is used to clean the oxidation tube. The goal of this work is to evaluate the efficacy of this compound for the tube cleaning and determine the passivation quality that the oxides produced this way provide to the Si wafers. It was observed that the cleanings were not capable to prevent the contamination of high initial lifetime Si wafers. However, the Trans-LC was sufficiently effective for oxidations realized on wafers with low initial minority carrier lifetime.Tema 4: Energía solar, conversión fotovoltaica.Facultad de Arquitectura y Urbanism

Influência do tempo de difusão de boro no campo retrodifusor seletivo de alumínio e boro em células solares de silício

O campo retrodifusor seletivo em células solares possibilita aumentar a eficiência e evita o abaulamento. O objetivo deste trabalho é analisar a influência do tempo de difusão de boro na formação do campo retrodifusor seletivo de alumínio e boro em células solares processadas em lâminas de silício Czochralski tipo p, grau solar. A difusão de boro foi implementada em toda a face posterior da lâmina e por serigrafia foi depositada a pasta de alumínio, somente nas trilhas metálicas. O processo de queima das pastas metálicas foi realizado em forno de esteira. Variou-se o tempo de difusão de boro de 10 a 30 minutos para a temperatura de difusão de 950 a 970 °C. Constatou-se que o melhor tempo de difusão depende da temperatura de difusão de boro e que a maior eficiência média, de (15,6 ± 0,1) %, foi obtida para a temperatura de 970 °C e tempo de difusão de 30 minutos.The selective back surface field in solar cells enables to increase the efficiency and avoid the bowing. The objective of this study is to analyze the influence of boron diffusion time in the formation of boron/aluminum selective back surface field. The solar cells were processed in solar grade Si-Cz wafers. The boron diffusion was performed in the whole rear face of the silicon wafer and the aluminum paste was deposited by screen printing, only in the metal fingers. The firing process of the metal pastes was performed in a belt furnace. The boron diffusion time was ranged from 10 to 30 minutes for the diffusion temperature from 950 °C to 970 °C. It was found that the better diffusion time depends on the boron diffusion temperature and the highest average efficiency of solar cells, of (15.6 ± 0.1) %, was obtained with the temperature of 970 °C and the diffusion time of 30 minutes.Tema 4: Energía solar, conversión fotovoltaica.Facultad de Arquitectura y Urbanism

Treatment of advanced hepatocellular carcinoma with very low levels of amplitude-modulated electromagnetic

BACKGROUND: Therapeutic options for patients with advanced hepatocellular carcinoma (HCC) are limited. There is emerging evidence that the growth of cancer cells may be altered by very low levels of electromagnetic fields modulated at specific frequencies. METHODS: A single-group, open-label, phase I/II study was performed to assess the safety and effectiveness of the intrabuccal administration of very low levels of electromagnetic fields amplitude modulated at HCC-specific frequencies in 41 patients with advanced HCC and limited therapeutic options. Three-daily 60-min outpatient treatments were administered until disease progression or death. Imaging studies were performed every 8 weeks. The primary efficacy end point was progression-free survival X6 months. Secondary efficacy end points were progression-free survival and overall survival. RESULTS: Treatment was well tolerated and there were no NCI grade 2, 3 or 4 toxicities. In all, 14 patients (34.1%) had stable disease for more than 6 months. Median progression-free survival was 4.4 months (95% CI 2.1 -5.3) and median overall survival was 6.7 months (95% CI 3.0 -10.2). There were three partial and one near complete responses. CONCLUSION: Treatment with intrabuccally administered amplitude-modulated electromagnetic fields is safe, well tolerated, and shows evidence of antitumour effects in patients with advanced HCC. British Journal of Cancer (2011Cancer ( ) 105, 640 -648. doi:10.1038Cancer ( /bjc.2011 Published online 9 August 2011 & 2011 Cancer Research UK Keywords: hepatocellular carcinoma; phase II study; radiofrequency electromagnetic fields; tumour-specific modulation frequencies; 27.12 MHz Treatment of inoperable or metastatic solid tumours is a major challenge in oncology, which is limited by the small number of therapeutic agents that are both well tolerated and capable of longterm control of tumour growth. Hepatocellular carcinoma (HCC) is the second most common cause of cancer death in men and the sixth in women worldwide Therapies for HCC are limited. Resections of the primary tumour or liver transplantation are the preferred therapeutic approaches in patients who are surgical candidates The intrabuccal administration of low and safe levels of electromagnetic fields, which are amplitude-modulated at disease-specific frequencies (RF AM EMF) PATIENTS AND METHODS Patients The study was aimed at offering treatment to patients with ChildPugh A or B advanced HCC and limited therapeutic options. Patients were classified as having advanced disease if they were not eligible for surgical resection or had disease progression after surgical or locoregional therapies or had disease progression after chemotherapy or sorafenib therapy. Patients with measurable, inoperable HCC were eligible for enrolment. Previous local or systemic treatments were allowed as long as they were discontinued at least 4 weeks before enrolment. Inclusion criteria included Eastern Cooperative Oncology Group performance status of 0, 1, or 2 and biopsy-confirmed HCC. Also allowed were patients with no pathological confirmation of HCC with a level of a-fetoprotein higher than 400 ng ml À1 and characteristic imaging findings as assessed by multislice computer tomography (CT) scan or intravenous contrast ultrasound (US). As per the University of São Paulo Department of Transplantation and Liver Surgery guidelines, liver biopsies are avoided in patients eligible for transplant or with severely impaired liver function. Exclusion criteria included confirmed or suspected brain metastasis, Child -Pugh C, previous liver transplant, and pregnancy. Study design This was an investigator-initiated, single centre, uncontrolled phase I/II trial in patients with advanced HCC. The trial was approved by the local human investigation committee and conducted in accordance with the Declaration of Helsinki. Written informed consent was obtained from each patient. The protocol was registered: clinicaltrial.gov identifier no. NCT00534664. Translational Therapeutics Administration of AM EMFs The generator of AM EMFs consists of a battery-driven radiofrequency (RF) EMF generator connected to a 1.5 m long 50 O coaxial cable, to the other end of which a stainless-steel spoonshaped mouthpiece is connected via an impedance transformer ( We have previously reported the discovery of HCC-specific modulation frequencies in 46 patients with HCC using a patientbased biofeedback approach and shown the feasibility of using AM EMFs for the treatment of patients with cancer The treatment method consists of the administration of AM EMFs by means of an electrically conducting mouthpiece, which is Translational Therapeutics in direct contact with the oral mucosa ( Efficacy end points and disease assessment The primary end point of this trial was the proportion of patients progression-free at 6 months. Secondary end points were progression-free survival (PFS) (first day of treatment until progression of disease or death) and overall survival (OS) (first day of receiving treatment to death). Objective response was assessed using the Response Evaluation Criteria in Solid Tumours group classification for patients with disease assessed by either helical multiphasic CT (Therasse et al, 2000). Whenever contrastenhanced US radiological assessment was used, it was performed and reviewed by the same radiologist specialised in HCC (MCC) as this imaging modality is investigator dependent. Tumour measurements were performed at baseline and every 8 weeks. Only patients with at least one repeat tumour measurement during therapy were considered for response analysis. Throughout the study, lesions measured at baseline were evaluated using the same technique (CT or contrast-enhanced US). Overall tumour response was scored as a complete response (CR), partial response (PR), or stable disease (SD) if the response was confirmed at least 4 weeks later. Alpha-fetoprotein (AFP) levels were measured every 8 weeks in all patients throughout the study, but changes in AFP were not an end point for assessment of response. Pain was assessed according to the NCI-CTCAE v.3.0 (http://ctep.cancer.gov/protocolDevelopment/electronic_applications/docs/ctcaev3.pdf). Statistical analyses and efficacy assessment All eligible patients who began treatment were considered assessable for the primary and secondary end points. A Simon two-stage phase II minimax design was used (Simon, 1989) to evaluate the rate of progression-free survival at 6 months. The interim analysis was performed once enrolment into the first stage was completed. In the first stage, 23 patients were observed. If two or fewer patients had progression-free survival X6 months, the trial would be terminated early for lack of efficacy. If the progression-free survival of 3 or more of the first 23 patients was equal or greater than 6 months, then an additional 18 patients would be enrolled to a maximum of 41 patients. If eight or more of the 41 had PFS of at least 6 months, we would conclude that the treatment was efficacious. This design had a Type I error rate of 5% and a Type II error rate of 10% for the null hypothesis of a 6-month PFS rate of 10% vs the alternative of 27.5%. KaplanMeier estimates of survival, PFS, and duration of response were calculated with standard errors based on Greenwood's formula. These calculations were performed using the Proc Lifetest in SAS 9.2 (SAS Institute Inc., Cary, NC, USA). RESULTS Patient recruitment and follow-up From October 2005 to July 2007, 267 patients were assessed for eligibility ( Translational Therapeutics A total of 31 patients (75.6%) had radiological evidence of disease progression at the time of enrolment as defined by comparison of baseline imaging studies, with imaging studies obtained within the previous 6 months; 34 (82.9%) patients had received therapy before enrolment, five (14.6%) of them systemic chemotherapy or sorafenib Treatment efficacy Six of the first 23 patients (26.1%) had progression-free survival X6 months, which led us to continue enrolling patients up to the preplanned total of 41 patients A total of 28 patients were evaluable for tumour response Translational Therapeutics patients without biopsy-proven disease subsequently withdrew consent after 4.9 months to undergo liver transplantation. The patient died of progression of disease 9.4 months later before undergoing liver transplantation. One patient with Child -Pugh B disease had a partial response lasting 11.7 months and died of gastrointestinal bleeding. One patient died of disease progression at 44.6 months. Overall, there were six long-term survivors with an OS greater than 24 months and four long-term survivors with an OS greater than 3 years. Importantly, five of the six (83%) long-term survivors had radiological evidence of disease progression at the time of study enrolment In all, 11 patients reported pain before treatment initiation, 3 patients reported grade 3, 5 patients reported grade 2, and 3 patients grade 1. Five patients reported complete disappearance of pain and two patients reported decreased pain shortly after treatment initiation. Two patients reported no changes and two patients reported increased pain. There were no treatment-related grade 2, 3, or 4 toxicities. The only treatment-related adverse events were grade 1 mucositis (one patient) and grade 1 somnolence (one patient) over a total of 266.8 treatment months. DISCUSSION Treatment with AM EMFs did not show any significant toxicity despite long-term treatment. The lack of toxicity experienced by the 41 patients presented in this report as well as the 28 patients from our previous report These data are comparable to recent phase II studies evaluating the effectiveness of standard chemotherapy as well as novel targeted therapies in HCC The majority of patients enrolled in this study had either failed standard treatment options or had severely impaired liver function that limited their ability to tolerate any form of systemic or intrahepatic therapy. Indeed, 16 patients (39.0%) had Child -Pugh B8 or B9 disease. Among these patients, the median progressionfree survival was 4.4 months (95% CI 1.6 -7.6 months), which is identical to that of the entire group. Five of these 16 patients (31.3%) received therapy for more than 7.5 months, which indicates that this therapy is well tolerated even in patients with severely impaired liver function. Previous treatment with standard chemotherapy or sorafenib does not seem to impact the effectiveness of AM EMFs in the treatment of HCC. Indeed, three of the four patients who had a Translational Therapeutics partial response while receiving AM EMFs had received previous systemic therapies (chemotherapy and sorafenib) and one had received intrahepatic therapy with 131 I-lipiodol. Tumour shrinkage as assessed by radiological imaging as well as changes in AFP levels were documented in patients with advanced HCC receiving RF EMF modulated at HCC-specific frequencies administered by an intrabuccal probe. Antitumour activity in patients with advanced HCC was exemplified by partial responses observed in four patients (9.8%) and decreases in AFP levels greater than 20% in four patients. A total of 18 patients (43.9%) either had objective response or SD X6 months. Importantly, this therapeutic approach has long-lasting therapeutic effects in several patients with metastatic cancer. Two of these patients, one with recurrent thyroid cancer metastatic to the lungs Our phase I/II study has several limitations. First, only 19 of the 41 patients had biopsy-proven HCC, and the others were diagnosed by clinical criteria, an approach similar to that used in a recently reported phase II trial evaluating the clinical and biological effects of bevacizumab in unresectable HCC (Siegel et al, 2008). Importantly, analysis restricted to these 19 patients shows rates of progression-free survival at 6 months, median progression-free survival and OS that are similar to those without biopsyproven HCC Antitumour response is considered the primary end point for phase II studies to proceed to further investigations. Studies applying Cox proportional hazards analysis indicate that this end point is consistently associated with survival in trials of locoregional therapies for HCC (Llovet et al, 2002) and a recent consensus article suggests that randomised studies are necessary to capture the true efficacy of novel therapies in HCC (Llovet et al, 2008a). In summary, the encouraging findings from this study warrant a randomised study to determine the impact of AM EMFs on OS and time to symptomatic progression. ACKNOWLEDGEMENTS We thank Drs Al B Benson III, Northwestern University and Leonard B Saltz, Memorial Sloan-Kettering Cancer Center for reviewing the manuscript. There is clinical evidence that very low and safe levels of amplitude-modulated electromagnetic fields administered via an intrabuccal spoon-shaped probe may elicit therapeutic responses in patients with cancer. However, there is no known mechanism explaining the anti-proliferative effect of very low intensity electromagnetic fields. METHODS: To understand the mechanism of this novel approach, hepatocellular carcinoma (HCC) cells were exposed to 27.12 MHz radiofrequency electromagnetic fields using in vitro exposure systems designed to replicate in vivo conditions. Cancer cells were exposed to tumour-specific modulation frequencies, previously identified by biofeedback methods in patients with a diagnosis of cancer. Control modulation frequencies consisted of randomly chosen modulation frequencies within the same 100 Hz -21 kHz range as cancer-specific frequencies. RESULTS: The growth of HCC and breast cancer cells was significantly decreased by HCC-specific and breast cancer-specific modulation frequencies, respectively. However, the same frequencies did not affect proliferation of nonmalignant hepatocytes or breast epithelial cells. Inhibition of HCC cell proliferation was associated with downregulation of XCL2 and PLP2. Furthermore, HCC-specific modulation frequencies disrupted the mitotic spindle. CONCLUSION: These findings uncover a novel mechanism controlling the growth of cancer cells at specific modulation frequencies without affecting normal tissues, which may have broad implications in oncology. Conflict of interes

Treatment of advanced hepatocellular carcinoma with very low levels of amplitude-modulated electromagnetic fields

BACKGROUND: Therapeutic options for patients with advanced hepatocellular carcinoma (HCC) are limited. There is emerging evidence that the growth of cancer cells may be altered by very low levels of electromagnetic fields modulated at specific frequencies. METHODS: A single-group, open-label, phase I/II study was performed to assess the safety and effectiveness of the intrabuccal administration of very low levels of electromagnetic fields amplitude modulated at HCC-specific frequencies in 41 patients with advanced HCC and limited therapeutic options. Three-daily 60-min outpatient treatments were administered until disease progression or death. Imaging studies were performed every 8 weeks. The primary efficacy end point was progression-free survival >= 6 months. Secondary efficacy end points were progression-free survival and overall survival. RESULTS: Treatment was well tolerated and there were no NCI grade 2, 3 or 4 toxicities. In all, 14 patients (34.1%) had stable disease for more than 6 months. Median progression-free survival was 4.4 months (95% CI 2.1-5.3) and median overall survival was 6.7 months (95% CI 3.0-10.2). There were three partial and one near complete responses. CONCLUSION: Treatment with intrabuccally administered amplitude-modulated electromagnetic fields is safe, well tolerated, and shows evidence of antitumour effects in patients with advanced HCC. British Journal of Cancer (2011) 105, 640-648. doi:10.1038/bjc.2011.292 www.bjcancer.com Published online 9 August 2011 (C) 2011 Cancer Research U

Human eosinophil adhesion and degranulation stimulated with eotaxin and RANTES in vitro: Lack of interaction with nitric oxide

<p>Abstract</p> <p>Background</p> <p>Airway eosinophilia is considered a central event in the pathogenesis of asthma. The toxic components of eosinophils are thought to be important in inducing bronchial mucosal injury and dysfunction. Previous studies have suggested an interaction between nitric oxide (NO) and chemokines in modulating eosinophil functions, but this is still conflicting. In the present study, we have carried out functional assays (adhesion and degranulation) and flow cytometry analysis of adhesion molecules (VLA-4 and Mac-1 expression) to evaluate the interactions between NO and CC-chemokines (eotaxin and RANTES) in human eosinophils.</p> <p>Methods</p> <p>Eosinophils were purified using a percoll gradient followed by immunomagnetic cell separator. Cell adhesion and degranulation were evaluated by measuring eosinophil peroxidase (EPO) activity, whereas expression of Mac-1 and VLA-4 was detected using flow cytometry.</p> <p>Results</p> <p>At 4 h incubation, both eotaxin (100 ng/ml) and RANTES (1000 ng/ml) increased by 133% and 131% eosinophil adhesion, respectively. L-NAME alone (but not D-NAME) also increased the eosinophil adhesion, but the co-incubation of L-NAME with eotaxin or RANTES did not further affect the increased adhesion seen with chemokines alone. In addition, L-NAME alone (but not D-NAME) caused a significant cell degranulation, but it did not affect the CC-chemokine-induced cell degranulation. Incubation of eosinophils with eotaxin or RANTES, in absence or presence of L-NAME, did not affect the expression of VLA-4 and Mac-1 on eosinophil surface. Eotaxin and RANTES (100 ng/ml each) also failed to elevate the cyclic GMP levels above baseline in human eosinophils.</p> <p>Conclusion</p> <p>Eotaxin and RANTES increase the eosinophil adhesion to fibronectin-coated plates and promote cell degranulation by NO-independent mechanisms. The failure of CC-chemokines to affect VLA-4 and Mac-1 expression suggests that changes in integrin function (avidity or affinity) are rather involved in the enhanced adhesion.</p