Foolproof quick-release locking pin

Locking pin can be withdrawn only when stress on the joint is negligible. Pin consists of a forward-pointing sleeve, a spring-loaded sliding handle, and a sliding plunger. Plunger movement controls installation and withdrawal of pin

Sewage Pollution in the Coastal Waters off Port Dickson, Straits of Malacca

The distribution of fecal colifonn bacteria in the near-shore waters and coastal waters of Port Dickson was studied between August 1987 and August 1989. Although a significantly high level of fecal coliform bacteria was found in the near- shore waters, very low levels were detected in the sediments and in roastal waters between 0.5 km and 5 kIn away from the roast. The results indirate that the coastal waters of Port Dickson are suitable for recreational and aquaculture uses

Determinación por espectrofotometría de la niclosamida a través de formulaciones base de Schiff en preparaciones farmacéuticas y veterinarias

Introduction: Niclosamide(NICS) its chemical name 5-chloro-N-(2- chloro-4-nitrophenyl)-2-hydroxybenz-amide]is the only commercially existing molluscicide optional by the WHO for large extent use in schistosomiasis be in charge of programs . NICS and its two new synthesized derivatives constructed to float on the water surface were able to kill cercariae, also obsessed promising activity in vitro nearby to an apicomplexan parasite Toxoplasma (4). Few spectrophotometric methods have been reported for the estimation of NICS as pure and in formulations, approximately these methods depend on reduction of nitro group (almost with zinc powder in acidic medium) followed by reaction with different reagents. The method based on reduction of nitro group of NICS then  reaction of reduced-NICS with para- N,N dimethylaminobenzaldehyde in non-aqueous medium (methanol) to form a colored product that has been proved successfully for the estimation of NICS in pharmaceutical and veterinary formulations Material and method :All reagents used are of analytical grade and are obtained from Fluka or Aldrich , NICS wassupplied from SIGMA companies. Methanolic solution of para- N,N- dimethylanimobenzaldehyde (Fluka)3%, weighing 3 g and dissolved in 100 ml methanol in a volumetric flask. All other reagents were prepared bydissolving the propriety weight in perfect solvent. A volume in the range of 0.1 to 1.7 ml of 100 µg.ml-1RNICS solution was transferred to 10 ml calibrated flasks.2ml of PNNDMABA (3.0 %) was added, and the volume was made up to 10 ml by adding methanol. The yellow Schiff ’s base was measured at 454 nm versus a blank solution. Results and Discussion:The optimum pH for reaction of NICS with para-N, N-dimethylanimobenzaldehyde equal to 3 which resulted by mixing the components of the reaction. The absorbance increase with increasing reagent concentration (para-N,N- dimethylanimobenzaldehyde) and reached maximum on adding volume of 2.0 ml of (3%), which also gives the highest value of determination coefficient (R2).The experimental data indicated that methanol was the optimum solvent used in dilution according to high intensity of Schiff ’s base and the good stability. The formation of the yellow Schiff ’s base being complete after mixing the components of reaction and the absorbance remained constant for at least 2 hours. Conclusion: Accurate and sensitive spectrophotometric method was described for the estimation of NICS. The present method has been successfully applied for the estimation of NICS in pharmaceutical and veterinary preparations

Pulsed Laser Heating of a Thermoelastic Medium with Two-temperature under Three-phase-lag Model

In this paper, the problem of the generalized thermoelastic medium for three different theories under the effect of a laser pulse and two-temperature is investigated. The Lord–Shulman (L-S), Green-Naghdi of type III (G-N III) and three-phase-lag (3PHL) theories are discussed with two-temperature. The normal mode analysis is used to obtain the analytical expressions of the displacement components, force stress, thermodynamic temperature and conductive temperature. The numerical results are given and presented graphically and the thermal force was applied. Comparisons are made with the results predicted by (3PHL), (G-N III) and (L-S) in the presence and absence of two-temperature. The boundary plane surface is heated by a non-Gaussian laser beam

Carbonate Hydroxyapatite and Silicon-Substituted Carbonate Hydroxyapatite: Synthesis, Mechanical Properties, and Solubility Evaluations

The present study investigates the chemical composition, solubility, and physical and mechanical properties of carbonate hydroxyapatite (CO3Ap) and silicon-substituted carbonate hydroxyapatite (Si-CO3Ap) which have been prepared by a simple precipitation method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence (XRF) spectroscopy, and inductively coupled plasma (ICP) techniques were used to characterize the formation of CO3Ap and Si-CO3Ap. The results revealed that the silicate (SiO4 4−) and carbonate (CO3 2−) ions competed to occupy the phosphate (PO4 3−) site and also entered simultaneously into the hydroxyapatite structure.TheSi-substitutedCO3Ap reduced the powder crystallinity and promoted ion release which resulted in a better solubility compared to that of Si-free CO3Ap. The mean particle size of Si-CO3Ap was much finer than that of CO3Ap. At 750∘C heat-treatment temperature, the diametral tensile strengths (DTS) of Si-CO3Ap and CO3Ap were about 10.8 ± 0.3 and 11.8 ± 0.4 MPa, respectively

Evaluation of fish behaviour and aggregation by underwater videography in an artificial reef in Tioman Island, Malaysia

The behaviour and aggregation of fish in an artificial reef area in Tioman Island, Malaysia, was observed using underwater videography under a combination of shooting conditions. The camera distance and direction relative to the neighboring artificial reef module was varied, and comparisons of images with a color filter were made. A distance of 260 cm at a diagonal shooting angle provided a suitable observation of the reef fish around the reef module, and a red color filter provided a truer color replication in morning observations while better images were obtained without the color filter in afternoon light environments. Four criteria were considered to assess the artificial reef effectiveness: total abundance, appearance rate, residence time and feeding frequency. A total of 824 individuals were observed during the study. Mean residence times were shorter for schooling fishes such as Caesio caerulaurea and Liza subviridis, and longer for solitary swimmers like Cephalopholis boenak and Scolopsis bilineatus. Feeding frequency was lower for schooling fishes. A significant correlation was obtained between the feeding frequency and residence time for the high feeding frequency fishes (r = 0.89; p<0.05). The effectiveness of the artificial reef was suggested to be significant in solitary swimmers but less so for schooling fishes

Factors Controlling the Development of Wine-Glass Forms in the Mountains of the Kurdistan Region, Iraq

The northern and northeastern parts of Iraq are mountainous areas and rugged topography with different erosional and morphological forms; among them are the wine-glass (erosional cirques) forms. They are developed in different shapes, sizes, and depths. In the outlets of the wine-glass forms; usually, alluvial fans are formed. The studied area is characterized by the presence of long and narrow anticlines with NW–SE trend that changes westward to E–W trend. The Cretaceous carbonate rocks form the main carapace of the majority of the mountains; however, locally Paleogene and/or Jurassic rocks form the carapace. In the core, rocks down to Devonian are exposed. In those anticlines where only Cretaceous rocks are exposed, no or very rarely wine-glass forms are developed. This is attributed to the Cretaceous carbonate rocks, which exist in huge thicknesses in many formations, with thickly bedded to massive nature and very hard erosion resisting rocks. Tens of the existing wineglass forms are studied to indicate the factors that control their development, which are the type of exposed rocks, their thicknesses, and hardness. To perform the aim of this study, different satellite imagery with different resolutions was used; besides using GIS technique and field check to improve the acquired date

Hybrid Signal Processing and Machine Learning Algorithm for Adaptive Fault Classification of Wind Farm Integrated Transmission Line Protection

The technological advancement in integration of Renewable Green Energy Sources (RGES) like Wind Farm Generators (WFG), and Photovoltaic (PV) system into conventional power system as a future solution to meet the increase in global energy demands in order to reduce the cost of power generation, and improve on the climate change impact. This innovation also introduces challenges in the power system protection by it being compromised due to injected fault current infeeds on existing facilities. These infeed lead to the undesired trip of a healthy section of the line, and protection system failure. This paper presents a soft computational approach to adaptive fault classification model on High Voltage Transmission Line (HVTL) with and without RGES-WFG integration topologies, using extracted one-cycle fault signature of voltage and current signals with wavelet statistical approach in Matlab. The results are unique signatures across all fault types and fault distances with distinct entropy energy values on proposed network architecture. The supervised machine learning algorithm from Bayesian network classified 99.15 % faults correctly with the operation time of 0.01 s to produced best-generalized model with an RMS error value of 0.05 for single line-to-ground (SLG) fault identification and classification. Best suitable for adaptive unit protection scheme integration

Factors Controlling the Development of Straight Valleys and Streams in the Kurdistan Region, North and Northeast of Iraq

The Iraqi Kurdistan Region is a mountainous area with relief difference ranging from few hundred meters up to 3000 m, and locally more. Almost all of the mountains form anticlines that have NW–SE trend changing westwards of longitude to E–W. The carapace of the majority of the mountains is built up of Cretaceous rocks; however, some of them are of older rocks. Many of those anticlines are crossed by straight valleys and/or are crossed by streams and rivers which form again straight lines and almost coincide with regional lineaments, usually in N–S or NE–SW trend. The studied straight valleys are controlled, most probably by tectonic factors, therefore, exhibit special topographic forms, like straight lineaments crossing many successive anticlines, and also clear bending in some of the ridges in their crossing points to the valleys and/or streams. This paper aims to determine and discuss the factors that control the development of the straight valleys and/or lineaments. To achieve this aim, remote sensing and GIS techniques were followed, using Landsat, QuickBird images as well as geological maps of different scales, and different published articles