4,573 research outputs found
Scout motor performance analysis and prediction study /PAPS/
Scout motor performance analysis and predictio
Cold-air investigation of a 4 1/2 stage turbine with stage-loading factor of 4.66 and high specific work output. 2: Stage group performance
The stage group performance of a 4 1/2 stage turbine with an average stage loading factor of 4.66 and high specific work output was determined in cold air at design equivalent speed. The four stage turbine configuration produced design equivalent work output with an efficiency of 0.856; a barely discernible difference from the 0.855 obtained for the complete 4 1/2 stage turbine in a previous investigation. The turbine was designed and the procedure embodied the following design features: (1) controlled vortex flow, (2) tailored radial work distribution, and (3) control of the location of the boundary-layer transition point on the airfoil suction surface. The efficiency forecast for the 4 1/2 stage turbine was 0.886, and the value predicted using a reference method was 0.862. The stage group performance results were used to determine the individual stage efficiencies for the condition at which design 4 1/2 stage work output was obtained. The efficiencies of stages one and four were about 0.020 lower than the predicted value, that of stage two was 0.014 lower, and that of stage three was about equal to the predicted value. Thus all the stages operated reasonably close to their expected performance levels, and the overall (4 1/2 stage) performance was not degraded by any particularly inefficient component
Cold air investigation of 4 1/2-stage turbine with stage loading factor of 4.66 and high specific work output. 1: Overall performance
The turbine developed design specific work output at design speed at a total pressure ratio of 6.745 with a corresponding efficiency of 0.855. The efficiency (0.855)was 3.1 points lower than the estimated efficiency quoted by the contractor in the design report and 0.7 of a point lower than that determined by a reference prediction method. The performance of the turbine, which was a forced vortex design, agreed with the performance determined by the prediction method to about the same extent as did the performance of three reference high stage loading factor turbines, which were free vortex designs
Design and cold-air test of single-stage uncooled turbine with high work output
A solid version of a 50.8 cm single stage core turbine designed for high temperature was tested in cold air over a range of speed and pressure ratio. Design equivalent specific work was 76.84 J/g at an engine turbine tip speed of 579.1 m/sec. At design speed and pressure ratio, the total efficiency of the turbine was 88.6 percent, which is 0.6 point lower than the design value of 89.2 percent. The corresponding mass flow was 4.0 percent greater than design
An Examination of Response Requirements Associated with Teachers\u27 use of Different Opportunities for Student Response During Instruction
Providing effective instruction that increases the degree to which students are engaged with the instructional content has been identified as a research-based practice in that it is associated with positive academic and behavioral outcomes. One high-leverage practice for engaging students is the provision of opportunities to respond (OTR) during instruction. However, previous research has shown that teachers at every level typically use OTRs at rates far below research-based recommendations. This study adds to the literature by breaking OTRs into verbal, non-verbal, and partner categories to further examine how teachers typically foster student engagement. Across 1095 total observations, OTR rates were observed to be higher than previous research. However, teachers at every level were found to use simple verbal questioning greater than 75% of the of the time they provided an engagement opportunity. A discussion focuses on what this implies for students with verbal deficits and on practical implications and areas for future research
Recommended from our members
Comparative study of design: application to Engineering Design
A recent exploratory study examines design processes across domains and compares them. This is achieved through a series of interdisciplinary, participative workshops. A systematic framework is used to collect data from expert witnesses who are practising designers across domains from engineering through architecture to product design and fashion, including film production, pharmaceutical drugs, food, packaging, graphics and multimedia and software. Similarities and differences across domains are described which indicate the types of comparative analysis we have been able to do from our data. The paper goes further and speculates on possible lessons for selected areas of engineering design which can be drawn from comparison with processes in other domains. As such this comparative design study offers the potential for improving engineering design processes. More generally it is a first step in creating a discipline of comparative design which aims to provide a new rich picture of design processes
The youngest massive protostars in the Large Magellanic Cloud
We demonstrate the unique capabilities of Herschel to study very young
luminous extragalactic young stellar objects (YSOs) by analyzing a central
strip of the Large Magellanic Cloud obtained through the HERITAGE Science
Demonstration Program. We combine PACS 100 and 160, and SPIRE 250, 350, and 500
microns photometry with 2MASS (1.25-2.17 microns) and Spitzer IRAC and MIPS
(3.6-70 microns) to construct complete spectral energy distributions (SEDs) of
compact sources. From these, we identify 207 candidate embedded YSOs in the
observed region, ~40% never-before identified. We discuss their position in
far-infrared color-magnitude space, comparing with previously studied,
spectroscopically confirmed YSOs and maser emission. All have red colors
indicating massive cool envelopes and great youth. We analyze four example
YSOs, determining their physical properties by fitting their SEDs with
radiative transfer models. Fitting full SEDs including the Herschel data
requires us to increase the size and mass of envelopes included in the models.
This implies higher accretion rates (greater than or equal to 0.0001 M_sun/yr),
in agreement with previous outflow studies of high-mass protostars. Our results
show that Herschel provides reliable longwave SEDs of large samples of
high-mass YSOs; discovers the youngest YSOs whose SEDs peak in Herschel bands;
and constrains the physical properties and evolutionary stages of YSOs more
precisely than was previously possible.Comment: Main text: 4 pages, 3 figures, 1 table; Online material: 3 figures, 1
table; to appear in the A&A Herschel Special Issu
- …