Oscillation modes of dc microdischarges with parallel-plate geometry

Two different oscillation modes in microdischarge with parallel-plate geometry has been observed: relaxation oscillations with frequency range between 1.23 and 2.1 kHz and free-running oscillations with 7 kHz frequency. The oscillation modes are induced by increasing power supply voltage or discharge current. For a given power supply voltage, there is a spontaneous transition from one to other oscillation mode and vice versa. Before the transition from relaxation to free-running oscillations, the spontaneous increase of oscillation frequency of relaxation oscillations form 1.3 kHz to 2.1 kHz is measured. Fourier Transform Spectra of relaxation oscillations reveal chaotic behaviour of microdischarge. Volt-Ampere characteristics associated with relaxation oscillations describes periodical transition between low current, diffuse discharge and normal glow. However, free-running oscillations appear in subnormal glow only.Comment: Submitted to: New Journal of Physic

Magnon Planar Hall Effect and Anisotropic Magnetoresistance in a Magnetic Insulator

Electrical resistivities can be different for charge currents travelling parallel or perpendicular to the magnetization in magnetically ordered conductors or semiconductors, resulting in the well-known planar Hall effect and anisotropic magnetoresistance. Here, we study the analogous anisotropic magnetotransport behavior for magnons in a magnetic insulator Y$_{3}$Fe$_{5}$O$_{12}$. Electrical and thermal magnon injection, and electrical detection methods are used at room temperature with transverse and longitudinal geometries to measure the magnon planar Hall effect and anisotropic magnetoresistance, respectively. We observe that the relative difference between magnon current conductivities parallel and perpendicular to the magnetization, with respect to the average magnon conductivity, i.e. $|(\sigma_{\parallel}^{\textrm{m}}-\sigma_{\perp}^{\textrm{m}})/\sigma_{0}^{\textrm{m}}|$ , is approximately 5% with the majority of the measured devices showing $\sigma_{\perp}^{\textrm{m}}>\sigma_{\parallel}^{\textrm{m}}$.Comment: 18 pages, 16 figure

Longitudinal spin Seebeck coefficient: heat flux vs. temperature difference method

The determination of the longitudinal spin Seebeck effect (LSSE) coefficient is currently plagued by a large uncertainty due to the poor reproducibility of the experimental conditions used in its measurement. In this work we present a detailed analysis of two different methods used for the determination of the LSSE coefficient. We have performed LSSE experiments in different laboratories, by using different setups and employing both the temperature difference method and the heat flux method. We found that the lack of reproducibility can be mainly attributed to the thermal contact resistance between the sample and the thermal baths which generate the temperature gradient. Due to the variation of the thermal resistance, we found that the scaling of the LSSE voltage to the heat flux through the sample rather than to the temperature difference across the sample greatly reduces the uncertainty. The characteristics of a single YIG/Pt LSSE device obtained with two different setups was $(1.143\pm0.007)\cdot 10^{-7}$ Vm/W and $(1.101\pm0.015)\cdot 10^{-7}$ Vm/W with the heat flux method and $(2.313\pm0.017)\cdot 10^{-7}$ V/K and $(4.956\pm0.005)\cdot 10^{-7}$ V/K with the temperature difference method. This shows that systematic errors can be considerably reduced with the heat flux method.Comment: PDFLaTeX, 10 pages, 6 figure

Nonlocal magnon-polaron transport in yttrium iron garnet

The spin Seebeck effect (SSE) is observed in magnetic insulator|heavy metal bilayers as an inverse spin Hall effect voltage under a temperature gradient. The SSE can be detected nonlocally as well, viz. in terms of the voltage in a second metallic contact (detector) on the magnetic film, spatially separated from the first contact that is used to apply the temperature bias (injector). Magnon-polarons are hybridized lattice and spin waves in magnetic materials, generated by the magnetoelastic interaction. Kikkawa et al. [Phys. Rev. Lett. \textbf{117}, 207203 (2016)] interpreted a resonant enhancement of the local SSE in yttrium iron garnet (YIG) as a function of the magnetic field in terms of magnon-polaron formation. Here we report the observation of magnon-polarons in \emph{nonlocal} magnon spin injection/detection devices for various injector-detector spacings and sample temperatures. Unexpectedly, we find that the magnon-polaron resonances can suppress rather than enhance the nonlocal SSE. Using finite element modelling we explain our observations as a competition between the SSE and spin diffusion in YIG. These results give unprecedented insights into the magnon-phonon interaction in a key magnetic material.Comment: 5 pages, 6 figure

Detection of DC currents and resistance measurements in longitudinal spin Seebeck effect experiments on Pt/YIG and Pt/NFO

In this work we investigated thin films of the ferrimagnetic insulators YIG and NFO capped with thin Pt layers in terms of the longitudinal spin Seebeck effect (LSSE). The electric response detected in the Pt layer under an out-of-plane temperature gradient can be interpreted as a pure spin current converted into a charge current via the inverse spin Hall effect. Typically, the transverse voltage is the quantity investigated in LSSE measurements (in the range of \mu V). Here, we present the directly detected DC current (in the range of nA) as an alternative quantity. Furthermore, we investigate the resistance of the Pt layer in the LSSE configuration. We found an influence of the test current on the resistance. The typical shape of the LSSE curve varies for increasing test currents.Comment: 4 pages, 2 figure

Electronic and magnetic structure of epitaxial NiO/Fe3_3O4_4(001) heterostructures grown on MgO(001) and Nb-doped SrTiO3_3(001)

We study the underlying chemical, electronic and magnetic properties of a number of magnetite based thin films. The main focus is placed onto NiO/Fe$_3$O$_4$(001) bilayers grown on MgO(001) and Nb-SrTiO$_3$(001) substrates. We compare the results with those obtained on pure Fe$_3$O$_4$(001) thin films. It is found that the magnetite layers are oxidized and Fe$^{3+}$ dominates at the surfaces due to maghemite ($\gamma$-Fe$_2$O$_3$) formation, which decreases with increasing magnetite layer thickness. From a layer thickness of around 20 nm on the cationic distribution is close to that of stoichiometric Fe$_3$O$_4$. At the interface between NiO and Fe$_3$O$_4$ we find the Ni to be in a divalent valence state, with unambiguous spectral features in the Ni 2p core level x-ray photoelectron spectra typical for NiO. The formation of a significant NiFe$_2$O$_4$ interlayer can be excluded by means of XMCD. Magneto optical Kerr effect measurements reveal significant higher coercive fields compared to magnetite thin films grown on MgO(001), and a 45$^{\circ}$ rotated magnetic easy axis. We discuss the spin magnetic moments of the magnetite layers and find that the moment increases with increasing thin film thickness. At low thickness the NiO/Fe$_3$O$_4$ films grown on Nb-SrTiO$_3$ exhibits a significantly decreased spin magnetic moments. A thickness of 20 nm or above leads to spin magnetic moments close to that of bulk magnetite

Spatiotemporal profile of emission from oscillating dc micro discharges

The axial light distributions in parallel-plate dc microdischarges in argon show similar behavior to large scale discharges. Between the low-current Townsend mode and the high current glow mode exists a large region of currents where different oscillations appear and the dynamic Volt-Ampere characteristic shows hysteresis behavior. During the oscillations the maximum peak intensity moves closer to the cathode, which is characteristic for the abnormal glow regime even though the average current is considerably smaller.Comment: submitted to: IEEE Trans. Plasma Sci., Spec. Issue on Images in Plasma Sc