2,064 research outputs found

    Use of the FAO AquaCrop model in developing sowing guidelines for rainfed maize in Zimbabwe

    Get PDF
    This paper presents a procedure in which the water-driven water productivity model AquaCrop was fine-tuned and validated for maize for the local conditions in Zimbabwe and then applied to develop sowing management options for decision support. Data from experiments of 2 seasons in Harare and from 5 other sites around Zimbabwe were used for the local calibration and validation of AquaCrop. Model parameters such as the reference harvest index (HIo); the canopy growth coefficient (CGC); early canopy decline and normalised biomass water productivity (WPb*) were adjusted during model calibration. Model performance was satisfactory after calibration with a Nash-Sutcliffe model efficiency parameter (EF = 0.81), RMSE = 15% and R2 = 0.86 upon validation. To develop sowing guidelines, historical climate series from 13 meteorological stations around Zimbabwe were used to simulate maize yield for 6 consecutive sowing dates determined according to criteria applicable in Zimbabwe. Three varieties and typical shallow and deep soil types were considered in the simulation scenarios. The simulated yield was analysed by an optimisation procedure to select the optimum sowing time that maximised long-term mean yield. Results showed that highest yields depended on the climate of the site (rainfall availability), variety (length of growing cycle) and soil depth (soil water storage capacity). The late variety gave higher mean yields for all sowing dates in the maize belt. Staggered sowing is recommended as a way of combating the effects of rainfall variability and as an answer to labour constraints.Keywords: biomass water productivity, AquaCrop, maize sowing dates, crop modellin

    First-Order Provenance Games

    Full text link
    We propose a new model of provenance, based on a game-theoretic approach to query evaluation. First, we study games G in their own right, and ask how to explain that a position x in G is won, lost, or drawn. The resulting notion of game provenance is closely related to winning strategies, and excludes from provenance all "bad moves", i.e., those which unnecessarily allow the opponent to improve the outcome of a play. In this way, the value of a position is determined by its game provenance. We then define provenance games by viewing the evaluation of a first-order query as a game between two players who argue whether a tuple is in the query answer. For RA+ queries, we show that game provenance is equivalent to the most general semiring of provenance polynomials N[X]. Variants of our game yield other known semirings. However, unlike semiring provenance, game provenance also provides a "built-in" way to handle negation and thus to answer why-not questions: In (provenance) games, the reason why x is not won, is the same as why x is lost or drawn (the latter is possible for games with draws). Since first-order provenance games are draw-free, they yield a new provenance model that combines how- and why-not provenance

    High-precision prompt-γ-ray spectral data from the reaction Pu 241 (nth, f)

    Get PDF
    In this paper we present results from the first high-precision prompt-γ-ray spectral measurements from the reaction Pu241(nth, f). Apart from one recent experiment, no data are reported in the literature for this fissioning system, which motivated a new dedicated experiment. We have measured prompt-fission γ rays with three cerium-doped LaBr3 (two 5.08cm×5.08 cm and one 7.62cm×7.62 cm) and one CeBr3 (5.08cm×5.08 cm) scintillation detectors, which all exhibit excellent timing and good energy resolution. The average γ-ray multiplicity was determined to be ν̄γ=(8.21±0.09) per fission, the average energy to be εγ=(0.78±0.01) MeV, and the total energy to be Eγ,tot=(6.41±0.06) MeV as the weighted average from all detectors. Since the results from all detectors are in excellent agreement, and the total released γ energy is modestly higher than the one in the present evaluated nuclear data files, we suspect that the underestimation of the prompt-γ heating in nuclear reactors is due to fast-neutron-induced fission on U238 or rather from fission induced by γ rays from neutron capture in the construction material.European Commision NeutAndalus FP7-PEOPLE-2012-CIGPrograma ERINDA 26949

    First use of single-crystal diamonds as fission-fragment detector

    Get PDF
    Single crystal chemical vapor deposited diamond (sCVD) was investigated for its ability to act as Fission fragment detector. In particular we investigated timing and energy resolution for application in a simultaneous time and energy measurement to determine the mass of the detected fission fragment. Previous tests have shown that poly crystalline chemical vapor deposited (pCVD) diamonds provide sufficient timing resolution, but their poor energy resolution did not allow complete separation between very low energy fission fragments, alpha-particles and noise. Our present investigations prove artificial sCVD diamonds to show similar timing resolution as pCVD diamonds close to 100 ps. Improved pulse height resolution allows the unequivocal separation of fission fragments, and the detection efficiency reaches 100%, but remains with about a few percent behind requirements for fragment mass identification. With high-speed digital electronics a timing resolution well below 100 ps is possible. However, the strongly varying quality of the presently available diamond material does not allow application on a sufficiently large scale within reasonable investments

    Stress patterns around distal angled implants in the all-on-four concept configuration

    Get PDF
    nonePurpose: The All-on-Four concept advocates immediate loading and the placement of distal implants at an angle. The purpose of this study was to do a qualitative descriptive analysis of stress patterns around the distal angled implant of the All-on-Four concept. Materials and Methods: Four photoelastic acrylic resin models, each with four implants simulating the All-on-Four configuration, were prepared. The two central implants were placed vertically and parallel in each model, and the distal implant on each side was placed at an increasing angle (0, 15, 30, and 45 degrees) in each model. The four implants were splinted by means of a cast metal bar. The photoelastic models were placed between two parallel anvils. Pairs of abutments were systematically subjected to a load by suspending 5-, 10-, and 15-kg weights from one of the anvils. Photoelastic analysis was accomplished using a circular polariscope. The fringe patterns produced in the photoelastic resin for each implant and load were photographed with a digital camera. Fringe concentrations and the highest fringe order were recorded and described for the apical, central, and coronal regions of the distal angled implant for each load scenario. Results: For the implants placed at 15- and 30-degree angles, little difference in stress patterns was observed between the central straight implant and the distal angled implant. For every load scenario and for all angulations, the lowest fringe order was recorded at the central region of the implant. The highest fringe order for the apical region was always higher than the highest fringe order for the coronal region of the implant. Markedly increased isochromatic fringe concentrations were observed in model 4, which had the distal implants placed at a 45-degree angle. Conclusion: Periimplant bone surrounding the 45-degree-angled distal abutment may be more prone to occlusal overload than bone surrounding implants with lesser tilts.non

    Effect of planned place of birth on obstetric interventions and maternal outcomes among low-risk women : a cohort study in the Netherlands

    Get PDF
    Background: The use of interventions in childbirth has increased the past decades. There is concern that some women might receive more interventions than they really need. For low-risk women, midwife-led birth settings may be of importance as a counterbalance towards the increasing rate of interventions. The effect of planned place of birth on interventions in the Netherlands is not yet clear. This study aims to give insight into differences in obstetric interventions and maternal outcomes for planned home versus planned hospital birth among women in midwife-led care. Methods: Women from twenty practices across the Netherlands were included in 2009 and 2010. Of these, 3495 were low-risk and in midwife-led care at the onset of labour. Information about planned place of birth and outcomes, including instrumental birth (caesarean section, vacuum or forceps birth), labour augmentation, episiotomy, oxytocin in third stage, postpartum haemorrhage >1000 ml and perineal damage, came from the national midwife-led care perinatal database, and a postpartum questionnaire. Results: Women who planned home birth more often had spontaneous birth (nulliparous women aOR 1.38, 95 % CI 1.08-1.76, parous women aOR 2.29, 95 % CI 1.21-4.36) and less often episiotomy (nulliparous women aOR 0.73, 0.58-0.91, parous women aOR 0.47, 0.33-0.68) and use of oxytocin in the third stage (nulliparous women aOR 0.58, 0.42-0.80, parous women aOR 0.47, 0.37-0.60) compared to women who planned hospital birth. Nulliparous women more often had anal sphincter damage (aOR 1.75, 1.01-3.03), but the difference was not statistically significant if women who had caesarean sections were excluded. Parous women less often had labour augmentation (aOR 0.55, 0.36-0.82) and more often an intact perineum (aOR 1.65, 1.34-2.03). There were no differences in rates of vacuum/forceps birth, unplanned caesarean section and postpartum haemorrhage >1000 ml. Conclusions: Women who planned home birth were more likely to give birth spontaneously and had fewer medical interventions. © 2016 The Author(s)

    Phase stability analysis in Fe-Pt and Co-Pt alloy systems: An augmented space study

    Full text link
    We have studied the problem of phase stability in Fe-Pt and Co-Pt alloy systems. We have used the orbital peeling technique in the conjunction of augmented space recursion based on the tight binding linear orbital method as the method for the calculation of pair interaction energies. In particular, we have generalized our earlier technique to take into account of magnetic effects for the cases where the magnetic transition is higher than the order disorder chemical transition temperature as in the case of Co3_3Pt. Our theoretical results obtained within this framework successfully reproduce the experimentally observed trends.Comment: 17 pages, 9 Figures. Accepted for publication in Journal of Physics : Condensed Matte

    Emerging ornamental plant invaders in Urban Areas – Centranthus ruber in Cape Town, South Africa as a case study

    Get PDF
    Plant species that receive significant human introduction effort and assistance generally are the most problematic invaders. Despite this, invasive ornamental species in urban settings have received relatively little attention if not invading natural areas. Here we consider Centranthus ruber in an urban setting in South Africa as a case study and explore when emerging invaders are able to cross the urban–wildland interface and what hinders early eradication in urban environments. Centranthus ruber was introduced into Cape Town, South Africa, more than a century ago as a garden ornamental, but until recently was not considered invasive. We determine the current and potential future distribution in South Africa, evaluate current management activities, and provide recommendations for control and legislation. By August 2013, we had found 64 populations, of which 31 were casual, 27 naturalized, and 6 invasive. This increased to more than 530 identified populations by the end of 2015, due to both spread and increased awareness. Centranthus ruber can invade near-pristine areas, with one population found in natural vegetation in the Table Mountain National Park. However, with only one slowly spreading population, the threat might be limited. We found no difference in plant mortality between chemical and mechanical clearing, but with mechanical clearing stimulating the soil seedbank, we recommend chemical methods. Using a species distribution model, we found large parts of South Africa, including the southwestern Cape where we conducted our surveys, to be climatically suitable for this species. Consequently, the category 1b regional listing in NEM:BA in the Western Cape is justified, but a listing in other parts of the country also might be appropriate. Based on our findings, we suggest that the extirpation of C. ruber in South Africa is possible, but without buy-in from residents in urban environments, reinvasion will render this impossible. This study stresses the importance of managing and legislating emerging invaders at the urban–wildland interface and the monitoring of common ornamental species with invasive traits
    corecore