Advanced supersonic technology propulsion system study

This study had the objectives of determining the most promising conventional and variable cycle engine types; the effect of design cruise Mach number (2.2, 2.7 and 3.2) on a commercial supersonic transport; effect of advanced engine technology on the choice of engine cycle; and effect of utilizing hydrogen as the engine fuel. The technology required for the engines was defined, and the levels of development to ensure availability of this technology in advanced aircraft propulsion systems were assessed. No clearcut best conventional or variable cycle engine was identified. The dry bypass turbojet and the duct burning turbofans were initially selected as the best conventional engines, but later results, utilizing augmentation at takeoff, added the mixed-flow augmented turbofan as a promising contender. The modulating air flow, three-rotor variable cycle engine identified the performance features desired from VCE concepts (elimination of inlet drag and reduction in afterbody drag), but was a very heavy and complex engine

The Development of Social Marketing Strategies for the American Board of Professional Psychology

Objective: Develop a social marketing strategy for the American Board of Professional Psychology (ABPP) so that potential members, as well as the public consumer receive an appropriate and meaningful message via social media. Method: Create a survey which will be distributed via Survey Monkey to early entry members of ABPP, executive board members of ABPP, board presidents, and the presidents of each academy. Results: Interpret the data and analyze the data by descriptive statistics. Conclusions: Use the data to inform recommendations that will serve to meet the goal of ABPP’s Communications Committee, that is reach their target audiences through the use of social media

Application of Silicon Carbide Chills in Controlling the Solidification Process of Casts Made of IN-713C Nickel Superalloy

The paper presents the method of manufacturing casts made of the IN-713C nickel superalloy using the wax lost investment castingprocess and silicon carbide chills. The authors designed experimental casts, the gating system and selected the chills material. Wax pattern,ceramic shell mould and experimental casts were prepared for the purposes of research. On the basis of the temperature distributionmeasurements, the kinetics of the solidification process was determined in the thickened part of the plate cast. This allowed to establish thequantity of phase transitions which occurred during cast cooling process and the approximate values of liquidus, eutectic, solidus andsolvus temperatures as well as the solidification time and the average value of cast cooling rate. Non-destructive testing and macroscopicanalysis were applied to determine the location and size of shrinkage defects. The authors present the mechanism of solidification andformation of shrinkage defects in casts with and without chills. It was found that the applied chills influence significantly the hot spots andthe remaining part of the cast. Their presence allows to create conditions for solidification of IN-713C nickel superalloy cast withoutshrinkage defects

Clockwise rotation of the Brahmaputra Valley relative to India: Tectonic convergence in the eastern Himalaya, Naga Hills, and Shillong Plateau

GPS data reveal that the Brahmaputra Valley has broken from the Indian Plate and rotates clockwise relative to India about a point a few hundred kilometers west of the Shillong Plateau. The GPS velocity vectors define two distinct blocks separated by the Kopili fault upon which 2–3 mm/yr of dextral slip is observed: the Shillong block between longitudes 89 and 93°E rotating clockwise at 1.15°/Myr and the Assam block from 93.5°E to 97°E rotating at ≈1.13°/Myr. These two blocks are more than 120 km wide in a north‐south sense, but they extend locally a similar distance beneath the Himalaya and Tibet. A result of these rotations is that convergence across the Himalaya east of Sikkim decreases in velocity eastward from 18 to ≈12 mm/yr and convergence between the Shillong Plateau and Bangladesh across the Dauki fault increases from 3 mm/yr in the west to \u3e8 mm/yr in the east. This fast convergence rate is inconsistent with inferred geological uplift rates on the plateau (if a 45°N dip is assumed for the Dauki fault) unless clockwise rotation of the Shillong block has increased substantially in the past 4–8 Myr. Such acceleration is consistent with the reported recent slowing in the convergence rate across the Bhutan Himalaya. The current slip potential near Bhutan, based on present‐day convergence rates and assuming no great earthquake since 1713 A.D., is now ~5.4 m, similar to the slip reported from alluvial terraces that offsets across the Main Himalayan Thrust and sufficient to sustain a Mw ≥ 8.0 earthquake in this area

Expression of prophage-encoded endolysins contributes to autolysis of Lactococcus lactis

Analysis of autolysis of derivatives of Lactococcus lactis subsp. cremoris MG1363 and subsp. lactis IL1403, both lacking the major autolysin AcmA, showed that L. lactis IL1403 still lysed during growth while L. lactis MG1363 did not. Zymographic analysis revealed that a peptidoglycan hydrolase activity of around 30 kDa is present in cell extracts of L. lactis IL1403 that could not be detected in strain MG1363. A comparison of all genes encoding putative peptidoglycan hydrolases of IL1403 and MG1363 led to the assumption that one or more of the 99 % homologous 27.9-kDa endolysins encoded by the prophages bIL285, bIL286 and bIL309 could account for the autolysis phenotype of IL1403. Induced expression of the endolysins from bIL285, bIL286 or bIL309 in L. lactis MG1363 resulted in detectable lysis or lytic activity. Prophage deletion and insertion derivatives of L. lactis IL1403 had a reduced cell lysis phenotype. RT-qPCR and zymogram analysis showed that each of these strains still expressed one or more of the three phage lysins. A homologous gene and an endolysin activity were also identified in the natural starter culture L. lactis subsp. cremoris strains E8, Wg2 and HP, and the lytic activity could be detected under growth conditions that were identical as those used for IL1403. The results presented here show that these endolysins of L. lactis are expressed during normal growth and contribute to autolysis without production of (lytic) phages. Screening for natural strains expressing homologous endolysins could help in the selection of strains with enhanced autolysis and, thus, cheese ripening properties

Strangelet search at RHIC

Two position sensitive Shower Maximum Detector (SMDs) for Zero-Degree Calorimeters (ZDCs) were installed by STAR before run 2004 at both upstream and downstream from the interaction point along the beam axis where particles with small rigidity are swept away by strong magnetic field. The ZDC-SMDs provides information about neutral energy deposition as a function of transverse position in ZDCs. We report the preliminary results of strangelet search from a triggered data-set sampling 100 million Au+Au collisions at top RHIC energy.Comment: Strange Quark Matter 2004 conference proceedin

Strangelet Search in AuAu Collisions at 200 GeV

We have searched for strangelets in a triggered sample of 61 million central (top 4%) Au+Au collisions at \sNN = 200 GeV near beam rapidities at the STAR detector. We have sensitivity to metastable strangelets with lifetimes of order $\geq 0.1 ns$, in contrast to limits over ten times longer in AGS studies and longer still at the SPS. Upper limits of a few 10^{-6} to 10^{-7} per central Au+Au collision are set for strangelets with mass ${}^{>}_{\sim}30$ GeV/c^{2}.Comment: As publishe

Insights into the 1968–1997 Dasht-e-Bayaz and Zirkuh earthquake sequences, eastern Iran, from calibrated relocations, InSAR and high-resolution satellite imagery

The sequence of seismicity in the Dasht-e-Bayaz and Zirkuh region of northeastern Iran, which includes 11 destructive earthquakes within a period of only 30 years, forms one of the most outstanding examples of clustered large and intermediate-magnitude seismic activity in the world.We perform a multiple-event relocation analysis, with procedures to remove systematic location bias, of 169 earthquakes, most of which occurred in the period 1968–2008, to better image the distribution of seismicity within this highly active part of Iran. The geographic locations of the clustered earthquakes were calibrated by the inclusion of phase arrivals from seismic stations at short epicentral distances, and also by matching the relative locations of the three largest events in the study to their mapped surface ruptures. The two independent calibration methods provide similar results that increase our confidence in the accuracy of the distribution of relocated epicentres. These calibrated epicentres, combined with the mapping of faults from high-resolution satellite imagery, and from an InSAR-derived constraint on fault location in one case, allow us to associate individual events with specific faults, and even with specific segments of faults, to better understand the nature of the active tectonics in this region during the past four decades. Several previous assumptions about the seismicity in this region are confirmed: (1) that the 1968 August 30 Mw 7.1 Dasht-e-Bayaz earthquake nucleated at a prominent segment boundary and left-step in the fault trace, (2) that the 1968 September 11 Mw 5.6 aftershock occurred on the Dasht-e-Bayaz fault at the eastern end of the 1968 rupture and (3) that the 1976 November 7 Mw 6.0 Qayen earthquake probably occurred on the E–W left-lateral Avash Fault. We show, in addition, that several significant events, including the 1968 September 1 and 4 (Mw 6.3 and 5.5) Ferdows earthquakes, the 1979 January 16 (Mw 6.5) and 1997 June 25 (Mw 5.9) Boznabad events and the 1979 December 7 (Mw 5.9) Kalat-e-Shur earthquake are likely to have ruptured previously unknown faults. Our improved description of the faulting involved in the 1968–1997 earthquake sequence highlights the importance of rupturing of conjugate left- and right-lateral faults in closely spaced events, or potentially even within a single earthquake, as was likely the case at the eastern end of the 1979 November 27 (Mw 7.1) Khuli-Buniabad main shock. The high level of clustered seismic activity probably results from the simultaneous activity on left- and right-lateral faults, an inherently unstable arrangement that must evolve rapidly. The combination of high-resolution satellite imagery and calibrated earthquake locations is a useful tool for investigating active tectonics, even in the absence of detailed field observations