9,310 research outputs found

    Mechanisms in the size segregation of a binary granular mixture

    Full text link
    A granular mixture of particles of two sizes that is shaken vertically will in most cases segregate. If the larger particles accumulate at the top of the sample, this is called the Brazil-nut effect (BNE); if they accumulate at the bottom, the reverse Brazil-nut effect (RBNE). While this process is of great industrial importance in the handling of bulk solids, it is not well understood. In recent years ten different mechanisms have been suggested to explain when each type of segregation is observed. However, the dependence of the mechanisms on driving conditions and material parameters and hence their relative importance is largely unknown. In this paper we present experiments and simulations where both types of particles are made from the same material and shaken under low air pressure, which reduces the number of mechanisms to be considered to seven. We observe both BNE and RBNE by varying systematically the driving frequency and amplitude, diameter ratio, ratio of total volume of small to large particles, and overall sample volume. All our results can be explained by a combination of three mechanisms: a geometrical mechanism called void filling, transport of particles in sidewall-driven convection rolls, and thermal diffusion, a mechanism predicted by kinetic theory.Comment: Quality of figures in cond-mat version is better than in journal versio

    All-metal, compact heat exchanger for space cryocoolers

    Get PDF
    This report describes the development of a high performance, all metal compact heat exchanger. The device is designed for use in a reverse Brayton cryogenic cooler which provides five watts of refrigeration at 70 K. The heat exchanger consists of a stainless steel tube concentrically assembled within a second stainless steel tube. Approximately 300 pairs of slotted copper disks and matching annular slotted copper plates are positioned along the centerline axis of the concentric tubes. Each of the disks and plates has approximately 1200 precise slots machined by means of a special electric discharge process. Positioning of the disk and plate pairs is accomplished by means of dimples in the surface of the tubes. Mechanical and thermal connections between the tubes and plate/disk pairs are made by solder joints. The heat exchanger assembly is 9 cm in diameter by 50 cm in length and has a mass of 10 kg. The predicted thermal effectiveness is greater than 0.985 at design conditions. Pressure loss at design conditions is less than 5 kPa in both fluid passages. Tests were performed on a subassembly of plates integrally soldered to two end headers. The measured thermal effectiveness of the test article exceeded predicted levels. Pressure losses were negligibly higher than predictions

    Airborne laser topographic mapping results from initial joint NASA/US Army Corps of Engineers experiment

    Get PDF
    Initial results from a series of joint NASA/US Army Corps of Engineers experiments are presented. The NASA Airborne Oceanographic Lidar (AOL) was exercised over various terrain conditions, collecting both profile and scan data from which river basin cross sections are extracted. Comparisons of the laser data with both photogrammetry and ground surveys are made, with 12 to 27 cm agreement observed over open ground. Foliage penetration tests, utilizing the unique time-waveform sampling capability of the AOL, indicate 50 cm agreement with photogrammetry (known to have difficulty in foliage covered terrain)

    Preliminary checklist of the Cerambycidae, Disteniidae, and Vesperidae (Coleoptera) of Peru

    Get PDF
    A preliminary checklist of the Cerambycidae, Disteniidae, and Vesperidae (Coleoptera) of Peru is presented. Within Cerambycidae, we record five subfamilies, 55 tribes, 345 genera and subgenera, and 714 species. Within Disteniidae, we record one tribe, six genera, and 11 species. We also record one subfamily, one tribe, one genus, and two species within Vesperidae. Four new country records are recorded: one species in the tribe Anacolini (Cerambycidae: Prioninae): Cycloprionus flavus Tippmann, 1953; and three species in the tribe Onciderini (Cerambycidae: Lamiinae): Cacostola simplex (Pascoe, 1859); Marensis simplex (Bates, 1865); Trachysomus cavigibba Martins, 1975. In addition, 161 species recorded are known only from Peru

    Derivation of Amplitude Equations by Renormalization Group Method

    Full text link
    A proper formulation in the perturbative renormalization group method is presented to deduce amplitude equations. The formulation makes it possible not only avoiding a serious difficulty in the previous reduction to amplitude equations by eliminating all of the secular terms but also consistent derivation of higher-order correction to amplitude equations.Comment: 6 page, revte

    Renormalization Group Method and Reductive Perturbation Method

    Full text link
    It is shown that the renormalization group method does not necessarily eliminate all secular terms in perturbation series to partial differential equations and a functional subspace of renormalizable secular solutions corresponds to a choice of scales of independent variables in the reductive perturbation method.Comment: 5 pages, late

    Clouds, Gravity, and Metallicity in Blue L Dwarfs: The Case of 2MASS J11263991–5003550

    Get PDF
    Optical and near-infrared spectroscopy of the newly discovered peculiar L dwarf 2MASS J11263991–5003550 are presented. Folkes et al. classified this source as a high proper motion L9±1 dwarf based on its strong H2O absorption at 1.4 μ m . We find that the optical spectrum of 2MASS J1126–5003 is in fact consistent with that of a normal L4.5 dwarf with notably enhanced FeH absorption at 9896 Å. However, its near-infrared spectrum is unusually blue, with strong H2O and weak CO bands similar in character to several recently identified "blue L dwarfs." Using 2MASS J1126–5003 as a case study, and guided by trends in the condensate cloud models of Burrows et al. and Marley et al., we find that the observed spectral peculiarities of these sources can be adequately explained by the presence of thin and/or large-grained condensate clouds as compared to normal field L dwarfs. Atypical surface gravities or metallicities alone cannot reproduce the observed peculiarities, although they may be partly responsible for the unusual condensate properties. We also rule out unresolved multiplicity as a cause for the spectral peculiarities of 2MASS J1126–5003. Our analysis is supported by examination of Spitzer mid-infrared spectral data from Cushing et al. which show that bluer L dwarfs tend to have weaker 10 μ m absorption, a feature tentatively associated with silicate oxide grains. With their unique spectral properties, blue L dwarfs like 2MASS J1126–5003 should prove useful in studying the formation and properties of condensates and condensate clouds in low-temperature atmospheres

    Remotely Readable Fiber Optic Compass

    Get PDF
    PatentA remotely readable fiber optic compass. A sheet polarizer is affixed to a magnet rotatably mounted in a compass body, such that the polarizer rotates with the magnet. The optical axis of the sheet polarizer is preferably aligned with the north-south axis of the magnet. A single excitation light beam is divided into four identical beams, two of which are passed through the sheet polarizer and through two fixed polarizing sheets which have their optical axes at right angles to one another. The angle of the compass magnet with respect to a fixed axis of the compass body can be determined by measuring the ratio of the intensities of the two light beams. The remaining ambiguity as to which of the four possible quadrants the magnet is pointing to is resolved by the second pair of light beams, which are passed through the sheet polarizer at positions which are transected by two semicircular opaque strips formed on the sheet polarizer. The incoming excitation beam and the four return beams are communicated by means of optical fibers, giving a remotely readable compass which has no electrical parts

    The role of law and ethics in developing business management as a profession

    Get PDF
    Currently, business management is far from being recognised as a profession. This paper suggests that a professional spirit should be developed which could function as a filter of commercial reasoning. Broadly, management will not be organised within the framework of a well-established profession unless formal knowledge, licensing, professional autonomy and professional codes of conduct are developed sufficiently. In developing business management as a profession, law may play a key role. Where the idea is that business management should be more professsionalised, managers must show that they are willing to adopt ethical values, while arriving at business decisions. The paper argues that ethics cannot survive without legal regulation, which, in turn, will not be supported by law unless lawyers can find alternative solutions to the large mechanisms of the official society, secured by the monopolised coercion of the nation state. From a micro perspective of law and business ethics, communities can be developed with their own conventions, rules and standards that are generated and sanctioned within the boundaries of the communities themselves
    corecore