254 research outputs found

    Lower critical field measurements in YBa2Cu3O(6+x) single crystals

    Get PDF
    The temperature dependence of the lower critical field in YBa2Cu3O(6+x) single crystals was determined by magnetization measurements with the applied field parallel and perpendicular to the c-axis. Results are compared with data from the literature and fitted to Ginzberg-Landau equations by assuming a linear dependence of the parameter kappa on temperature. A value of 7 plus or minus 2 kOe was estimated for the thermodynamic critical field at T = O by comparison of calculated H (sub c2) values with experimental data from the literature

    Measurement of H(sub c1) in a single crystal of YBa2Cu3O7 with low pinning

    Get PDF
    The measurement of H(sub c1) in barium yttrium copper oxide (BYCO) is often ambiguous because the presence of large pinning forces makes it difficult to discern exactly where the first deviation from linearity occurs. In addition there are complications because demagnetizing factors are often not well known. By utilizing a single crystal of YBCO with a nearly cubic shape, the uncertainty in the demagnetizing factor was minimized. In addition, the crystal used exhibited a very small amount of pinning with H applied perpendicular to the c axis, and a sharp break in the initial magnetization vs. field curve could be observed over a wide range of temperature. This allowed a precise determination of H(sub c1). The measured values of H(sub c1) could be well described by the Abrikosov relation with a Ginzburg-Landau parameter which varied linearly with temperature

    ELECTRON MICROSCOPIC AUTORADIOGRAPHY OF GERMINAL CENTER CELLS IN MOUSE SPLEEN

    Get PDF
    The fine structure of tritiated thymidine-labeled cells in antigen-stimulated mouse spleen germinal centers is described. In studies on the ultrastructural level, two labeled cell types found in germinal centers are observed. Large lymphocytes are characterized by their very numerous free ribosomes, a paucity of endoplasmic reticulum, relatively few mitochondria, and a poorly developed Golgi region. The nuclei are large and vesicular, and large nucleoli are present. A second labeled cell type appears to contain more mitochondria and has a higher development of the Golgi area. The nucleus contains large, numerous blocks of chromatin, indicative of a more differentiated cell type. Reticular cells, both phagocytic and non-phagocytic, were not observed to be labeled in the germinal centers

    Crusting And Swelling Effects On Water Infiltration Into Soil

    Get PDF

    The NBS: Processing/Microstructure/Property Relationships in 2024 Aluminum Alloy Plates

    Get PDF
    As received plates of 2024 aluminum alloy were examined. Topics covered include: solidification segregation studies; microsegregation and macrosegregation in laboratory and commercially cast ingots; C-curves and nondestructive evaluation; time-temperature precipitation diagrams and the relationships between mechanical properties and NDE measurements; transmission electron microscopy studies; the relationship between microstructure and properties; ultrasonic characterization; eddy-current conductivity characterization; the study of aging process by means of dynamic eddy current measurements; and Heat flow-property predictions, property degradations due to improve quench from the solution heat treatment temperature

    Processing Bi-Pb-Sr-Ca-Cu-O superconductors from amorphous state

    Get PDF
    The bismuth based high T sub c superconductors can be processed via an amorphous Bi-Pb-Sr-Ca-Cu oxide. The amorphous oxides were prepared by melting the constituent powders in an alumina crucible at 1200 C in air followed by pouring the liquid onto an aluminum plate, and rapidly pressing with a second plate. In the amorphous state, no crystalline phase was identified in the powder x ray diffraction pattern of the quenched materials. After heat treatment at high temperature the amorphous materials crystallized into a glass ceramic containing a large fraction of the Bi2Sr2Ca2Cu3O(x) phase T sub c = 110 K. The processing method, crystallization, and results of dc electrical resistivity and ac magnetic susceptibility measurements are discussed

    Modeling of micromagnetic Barkhausen activity using a stochastic process extension to the theory of hysteresis

    Get PDF
    Recent work by Bertotti [IEEE Trans. Magn. MAG‐24, 621 (1988)] and others has shown that it is possible to model the micromagnetic Barkhausen discontinuities at the coercive point using a two‐parameter stochastic model. However, the present formulation of the model is restricted to limited regions of the hysteresis curve over which dM/dH is approximately constant and whendH/dt is held at a constant rate. A natural extension of this model is to take the basic result, in which the level of Barkhausen activity in one time period is related to the activity in the previous time period, and increment it by a small amount which is dependent on the differential permeability. The extension of the model proposed here uses the theory of ferromagnetichysteresis to determine the differential permeability at any point of the hysteresis loop. The Barkhausen activity is then assumed to vary in proportion to the differential permeability. The resulting model allows the Barkhausen sum of discontinuous changes in magnetization to be modelled around the entire hysteresis loop, leading to an important generalization of the basic model

    Levitation of superconducting composites

    Get PDF
    The inverse levitation of a high temperature superconductor polymer composite consisting of powdered quench melt growth Ba2YCu3O(7-delta) and cyanoacrylate is reported. Magnetic hysteresis loop measurements for the composite are compared to those measured for the bulk material prior to powdering. Differences in the flux pining capability between the two material forms are small but significant
    corecore