A study on comparison of cerviprime and IV oxytocin in labour induction and evaluation of changes in the bishop’s score with these two agents

Background: There are several strategies for the induction of labor (IOL), and pharmacologic agents, including oxytocin and prostaglandins, are most commonly used in clinical practice. Compared with oxytocin, the prostaglandin E2 agent, dinoprostone, has been regarded as moreeffective for the induction of labor of LTPs with a non-dilated cervix. Objective was to compare the PGE2 gel placed intracervically with that of oxytocin given intravenously for induction of labor in both primipara as well as multipara with the comparison of Bishop’s score at the starting of induction and its improvement with both of these inducing agents in those with indications for induction with gestational age greater than 36 weeks. Methods: Hospital based prospective observational study over a period of one year on patients attending the antenatal and high-riskpregnancy clinic and scheduled for induction of labor with Bishop score <4. Results: The number of successful induction was low in primiparae group with low Bishop’s score (1-2). There were greater number of successful inductions in both primi as well as multiparae with higher Bishop’s score. Conclusions: When a primigravida had a low cervical score or an unfavourable cervix, intracervical PGE2 gel was found to be more effective at ripening the cervix and inducing labour. Both medicines were equally effective at inducing labour in cases of multigavidae with any Bishop's score and primi with a higher Bishop's score

Linear and nonlinear analysis of normal and CAD-affected heart rate signals

Coronary Artery Disease (CAD) is one of the dangerous cardiac disease, often may lead to sudden cardiac death. It is difficult to diagnose CAD by manual inspection of electrocardiogram (ECG) signals. To automate this detection task, in this study, we extracted the Heart Rate (HR) from the ECG signals and used them as base signal for further analysis. We then analyzed the HR signals of both normal and CAD subjects using (i) time domain, (ii) frequency domain and (iii) nonlinear techniques. The following are the nonlinear methods that were used in this work: Poincare plots, Recurrence Quantification Analysis (RQA) parameters, Shannon entropy, Approximate Entropy (ApEn), Sample Entropy (SampEn), Higher Order Spectra (HOS) methods, Detrended Fluctuation Analysis (DFA), Empirical Mode Decomposition (EMD), Cumulants, and Correlation Dimension. As a result of the analysis, we present unique recurrence, Poincare and HOS plots for normal and CAD subjects. We have also observed significant variations in the range of these features with respect to normal and CAD classes, and have presented the same in this paper. We found that the RQA parameters were higher for CAD subjects indicating more rhythm. Since the activity of CAD subjects is less, similar signal patterns repeat more frequently compared to the normal subjects. The entropy based parameters, ApEn and SampEn, are lower for CAD subjects indicating lower entropy (less activity due to impairment) for CAD. Almost all HOS parameters showed higher values for the CAD group, indicating the presence of higher frequency content in the CAD signals. Thus, our study provides a deep insight into how such nonlinear features could be exploited to effectively and reliably detect the presence of CAD

A Review

Ovarian cancer is the most common cause of death among gynecological malignancies. We discuss different types of clinical and nonclinical features that are used to study and analyze the differences between benign and malignant ovarian tumors. Computer-aided diagnostic (CAD) systems of high accuracy are being developed as an initial test for ovarian tumor classification instead of biopsy, which is the current gold standard diagnostic test. We also discuss different aspects of developing a reliable CAD system for the automated classification of ovarian cancer into benign and malignant types. A brief description of the commonly used classifiers in ultrasound-based CAD systems is also given

Effect of complex wavelet transform filter on thyroid tumor classification in three-dimensional ultrasound

Ultrasonography has great potential in differentiating malignant thyroid nodules from the benign ones. However, visual interpretation is limited by interobserver variability, and further, the speckle distribution poses a challenge during the classification process. This article thus presents an automated system for tumor classification in three-dimensional contrast-enhanced ultrasonography data sets. The system first processes the contrast-enhanced ultrasonography images using complex wavelet transform-based filter to mitigate the effect of speckle noise. The higher order spectra features are then extracted and used as input for training and testing a fuzzy classifier. In the off-line training system, higher order spectra features are extracted from a set of images known as the training images. These higher order spectra features along with the clinically assigned ground truth are used to train the classifier and obtain an estimate of the classifier or training parameters. The ground truth tells the class label of the image (i.e. whether the image belongs to a benign or malignant nodule). During the online testing phase, the estimated classifier parameters are applied on the higher order spectra features that are extracted from the testing images to predict their class labels. The predicted class labels are compared with their corresponding original ground truth to evaluate the performance of the classifier. Without utilizing the complex wavelet transform filter, the fuzzy classifier demonstrated an accuracy of 91.6%, while utilizing the complex wavelet transform filter, the accuracy significantly boosted to 99.1%

Ovarian Tissue Characterization in Ultrasound: A Review

Ovarian cancer is the most common cause of death among gynecological malignancies. We discuss different types of clinical and nonclinical features that are used to study and analyze the differences between benign and malignant ovarian tumors. Computer aided diagnostic (CAD) systems of high accuracy are being developed as an initial test for ovarian tumor classification instead of biopsy, which is the current gold standard diagnostic test. We also discuss different aspects of developing a reliable CAD system for the automated classification of ovarian cancer into benign and malignant types. A brief description of the commonly used classifiers in ultrasound-based CAD systems is also give

ECG signal generation and heart rate variability signal extraction : signal processing, features detection, and their correlation with cardiac diseases

The sum total of millions of cardiac cell depolarization potentials can be represented by an electrocardiogram (ECG). Inspection of the P–QRS–T wave allows for the identification of the cardiac bioelectrical health and disorders of a subject. In order to extract the important features of the ECG signal, the detection of the P wave, QRS complex, and ST segment is essential. Therefore, abnormalities of these ECG parameters are associated with cardiac disorders. In this work, an introduction to the genesis of the ECG is given, followed by a depiction of some abnormal ECG patterns and rhythms (associated with P–QRS–T wave parameters), which have come to be empirically correlated with cardiac disorders (such as sinus bradycardia, premature ventricular contraction, bundle-branch block, atrial flutter, and atrial fibrillation). We employed algorithms for ECG pattern analysis, for the accurate detection of the P wave, QRS complex, and ST segment of the ECG signal. We then catagorited and tabulated these cardiac disorders in terms of heart rate, PR interval, QRS width, and P wave amplitude. Finally, we discussed the characteristics and different methods (and their measures) of analyting the heart rate variability (HRV) signal, derived from the ECG waveform. The HRV signals are characterised in terms of these measures, then fed into classifiers for grouping into categories (for normal subjects and for disorders such as cardiac disorders and diabetes) for carrying out diagnosis

A Review on Ultrasound-based Thyroid Cancer Tissue Characterization and Automated Classification.

In this paper, we review the different studies that developed Computer Aided Diagnostic (CAD) for automated classification of thyroid cancer into benign and malignant types. Specifically, we discuss the different types of features that are used to study and analyze the differences between benign and malignant thyroid nodules. These features can be broadly categorized into (a) the sonographic features from the ultrasound images, and (b) the non-clinical features extracted from the ultrasound images using statistical and data mining techniques. We also present a brief description of the commonly used classifiers in ultrasound based CAD systems. We then review the studies that used features based on the ultrasound images for thyroid nodule classification and highlight the limitations of such studies. We also discuss and review the techniques used in studies that used the non-clinical features for thyroid nodule classification and report the classification accuracies obtained in these studies

Automated diagnosis of cardiac health using recurrence quantification analysis

The sum total of millions of cardiac cell depolarization potentials can be represented using an electrocardiogram (ECG). By inspecting the P-QRS-T wave in the ECG of a patient, the cardiac health can be diagnosed. Since the amplitude and duration of the ECG signal are too small, subtle changes in the ECG signal are very difficult to be deciphered. In this work, the heart rate variability (HRV) signal has been used as the base signal to observe the functioning of the heart. The HRV signal is non-linear and non-stationary. Recurrence quantification analysis (RQA) has been used to extract the important features from the heart rate signals. These features were fed to the fuzzy, Gaussian mixture model (GMM), and probabilistic neural network (PNN) classifiers for automated classification of cardiac bio-electrical contractile disorders. Receiver operating characteristics (ROC) was used to test the performance of the classifiers. In our work, the Fuzzy classifier performed better than the other classifiers and demonstrated an average classification accuracy, sensitivity, specificity, and positive predictive value of more than 83%. The developed system is suitable to evaluate large datasets

Vesselomeasure: user friendly tools and techniques for ultrasound carotid artery analysis

Atherosclerosis is a disease in which plaque builds up inside the arteries resulting in several complications such as narrowing of the lumen (stenosis), plaque rupture, and consequently heart attacks and stroke. Our group has been actively working in this area for nearly a decade and has developed several proprietary computer aided diagnostic (CAD) tools that assist in every stage of carotid artery analysis. The goal of this paper is to review CAD based carotid artery analysis in general, and to present brief descriptions of the techniques that we developed in this area. Specifically, we first describe the CAD techniques that we developed to handle the pre-processing of B-mode ultrasound images of the carotid artery. We then summarize the most advanced technical solutions that we developed for automated Intima-Media Thickness (IMT) measurement. We also review the most widely used and accepted performance evaluation metrics for IMT measurement, and clinical validation. Subsequently, we discuss the possibility of plaque delineation using contrast-enhanced ultrasound imaging and present a tool for differentiation of symptomatic and asymptomatic plaques. We also present a technique for atherosclerosis monitoring, and finally review the capabilities and limitations of our algorithm