A Comparison of the Oxidation and Nitridation Properties of Selected Chromia- and Alumina-Forming Alloys at 800 degrees C

Three FeCrAl alloys and two chromia-formers (a stainless steel, and a Ni-base alloy) have been exposed in four environments (dry air, air + 20% H2O, 20% H-2 + 20% H2O + Ar and 95% N-2 + 5% H-2) for 168 h at 800 degrees C. The corroded samples were investigated by SEM/EDS, XRD and gravimetry, and the formation of CrO2(OH)(2)(g) was measured as a function of time using a denuder technique. The Fe-base alloy formed a Cr-rich protective oxide scale in dry air and wet air but suffered break-away oxidation in 20% H-2 + 20% H2O + Ar. In contrast, the Ni-base alloy suffered extensive NiO formation and internal oxidation in dry air and wet air but formed a protective chromia scale in 20% H-2 + 20% H2O. All three FeCrAl alloys formed protective alumina scales in dry air, wet air and 20% H-2 + 20% H2O + Ar. The FeCrAl alloy Kanthal APMT was severely nitrided in the 95% N-2 + 5% H-2 environment due to defects in the oxide scale associated with RE-rich inclusions which allowed nitrogen to enter the alloy. In contrast, the two Cr-lean FeCrAl alloys Kanthal EF101 and Kanthal EF100 did not suffer nitridation at all

Exploring the Effect of Silicon on the High Temperature Corrosion of Lean FeCrAl Alloys in Humid Air

A new approach to reduce the chromium and aluminium concentrations in FeCrAl alloys without significantly impairing corrosion resistance is to alloy with 1-2 wt.% silicon. This paper investigates the "silicon effect" on oxidation by comparing the oxidation behavior and scale microstructure of two FeCrAl alloys, one alloyed with silicon and the other not, in dry and wet air at 600 degrees C and 800 degrees C. Both alloys formed thin protective oxide scales and the Cr-evaporation rates were small. In wet air at 800 degrees C the Si-alloyed FeCrAl formed an oxide scale containing mullite and tridymite together with alpha- and gamma-alumina. It is suggested that the reported improvement of the corrosion resistance of Al- and Cr-lean FeCrAl\u27s by silicon alloying is caused by the appearance of Si-rich phases in the scale

Efficacy of an external chromia layer in reducing nitridation of high temperature alloys

Six high temperature alloys have been exposed in N2/H2 environments at 900 \ub0C. In order to study the efficacy of a chromia barrier layer against nitrogen ingress, experiments were performed in two environments having the same N2/H2 ratio but slightly different water content, chromia formation being spontaneous in one case only. The samples were evaluated by SEM/STEM/EDX, XRD, gravimetry and GD-OES. The presence of an external chromia scale reduced nitridation of the alloy by 50–95%. Furthermore, in the presence of a continuous alumina layer no nitridation of the alloy was detected

On the needs and requirements arising from connected and automated driving

Future 5G systems have set a goal to support mission-critical Vehicle-to-Everything (V2X) communications and they contribute to an important step towards connected and automated driving. To achieve this goal, the communication technologies should be designed based on a solid understanding of the new V2X applications and the related requirements and challenges. In this regard, we provide a description of the main V2X application categories and their representative use cases selected based on an analysis of the future needs of cooperative and automated driving. We also present a methodology on how to derive the network related requirements from the automotive specific requirements. The methodology can be used to analyze the key requirements of both existing and future V2X use cases

Surface Deposition and Phase Behavior of Oppositely Charged Polyion–Surfactant Ion Complexes. Delivery of Silicone Oil Emulsions to Hydrophobic and Hydrophilic Surfaces

The adsorption from mixed polyelectrolyte-surfactant solutions at hydrophobized silica surfaces was investigated by in situ null-ellipsometry, and compared to similar measurements for hydrophilic silica surfaces. Three synthetic cationic copolymers of varying hydrophobicity and one cationic hydroxyethyl cellulose were compared in mixtures with the anionic surfactant sodium dodecylsulfate (SDS) in the absence or presence of a dilute silicone oil emulsion. The adsorption behavior was mapped while stepwise increasing the concentration of SDS to a polyelectrolyte solution of constant concentration. The effect on the deposition of dilution of the bulk solution in contact with the surface was also investigated by gradual replacement of the bulk solution with 1 mM aqueous NaCl. An adsorbed layer remained after complete exchange of the polyelectrolyte/surfactant solution for aqueous NaCl. In most cases, there was a codeposition of silicone oil droplets, if such droplets were present in the formulation before dilution. The overall features of the deposition were similar at hydrophobic and hydrophilic surfaces, but there were also notable differences. SDS molecules adsorbed selectively at the hydrophobized silica surface, but not at the hydrophilic silica, which influenced the coadsorption of the cationic polymers. The largest amount of deposited material after dilution was found for hydrophilic silica and for the least-hydrophobic cationic polymers. For the least-hydrophobic polyions, no significant codeposition of silicone oil was detected at hydrophobized silica after dilution if the initial SDS concentration was high

The bodily presence of significant others: Intensive care patients' experiences in a situation of critical illness

This study is about intensive care patients and the bodily presence of significant others. The aim of the study is to inquire and understand the patients experience of the body in relation to their significant others during critical illness. Open, unstructured, in-depth interviews with six former intensive care patients provide the data for the study. The phenomenological–hermeneutical analysis points to a theme among ICU patients' experience of conflict between proximity and distance during the bodily presence of their relations. Patients experience different and conflicting forms of responses to the presence of their significant others. Patients experience significant positive confirmation but also negation through this presence. In the ICU situation, the reactions of significant others appear difficult to deal with, yet the physical presence is significant for establishing a sense of affinity. Patients seek to take some responsibility for themselves as well as for their relatives, and are met with a whole spectrum of reactions. Intensive care patients experience the need to be actively, physically present, which often creates sharp opposition between their personal needs and the needs of their significant others for active participation

What can we learn from consumer reports on psychiatric adverse drug reactions with antidepressant medication? Experiences from reports to a consumer association

Background According to the World Health Organization (WHO) the cost of adverse drug reactions   (ADRs) in the general population is high and under-reporting by health professionals   is a well-recognized problem. Another way to increase ADR reporting is to let the   consumers themselves report directly to the authorities. In Sweden it is mandatory   for prescribers to report serious ADRs to the Medical Products Agency (MPA), but there   are no such regulations for consumers. The non-profit and independent organization   Consumer Association for Medicines and Health, KILEN has launched the possibility   for consumers to report their perceptions and experiences from their use of medicines   in order to strengthen consumer rights within the health care sector. This study aimed   to analyze these consumer reports. Methods All reports submitted from January 2002 to April 2009 to an open web site in Sweden   where anyone could report their experience with the use of pharmaceuticals were analyzed   with focus on common psychiatric side effects related to antidepressant usage. More   than one ADR for a specific drug could be reported. Results In total 665 reports were made during the period. 442 reports concerned antidepressant   medications and the individual antidepressant reports represented 2392 ADRs and 878   (37%) of these were psychiatric ADRs. 75% of the individual reports concerned serotonin-reuptake   inhibitor (SSRI) and the rest serotonin-norepinephrine reuptake inhibitor (SNRI).   Women reported more antidepressant psychiatric ADRs (71%) compared to men (24%). More   potentially serious psychiatric ADRs were frequently reported to KILEN and withdrawal   symptoms during discontinuation were also reported as a common issue. Conclusions The present study indicates that consumer reports may contribute with important information   regarding more serious psychiatric ADRs following antidepressant treatment. Consumer   reporting may be considered a complement to traditional ADR reporting

Polyelectrolyte Adsorption on Solid Surfaces: Theoretical Predictions and Experimental Measurements

This work utilizes a combination of theory and experiments to explore the adsorption of two different cationic polyelectrolytes onto oppositely charged silica surfaces at pH 9. Both polymers, poly(diallyldimethylammonium chloride), PDADMAC, and poly(4-vinyl N-methylpyridinium iodide), PVNP, are highly charged and highly soluble in water. Another important aspect is that a silica surface carries a relatively high surface charge density at this pH level. This means that we have specifically chosen to investigate adsorption under conditions where electrostatics can be expected to dominate the interactions. Of specific focus in this work is the response of the adsorption to the addition of simple salt (i.e., a process where electrostatics is gradually screened out). Theoretical predictions from a recently developed correlation-corrected classical density functional theory for polyelectrolytes are evaluated by direct quantitative comparisons with corresponding experimental data, as obtained by ellipsometry measurements. We find that, at low concentrations of simple salt, the adsorption increases with ionic strength, reaching a maximum at intermediate levels (about 200 mM). The adsorption then drops but retains a finite level even at very high salt concentrations, indicating the presence of nonelectrostatic contributions to the adsorption. In the theoretical treatment, the strength of this relatively modest but otherwise largely unknown nonelectrostatic surface affinity was estimated by matching predicted and experimental slopes of adsorption curves at high ionic strength. Given these estimates for the nonelectrostatic part, experimental adsorption data are essentially captured with quantitative accuracy by the classical density functional theory