Second-Order Coherence Across the Brillouin Lasing Threshold

Brillouin-Mandelstam scattering is one of the most accessible nonlinear optical phenomena and has been widely studied since its theoretical discovery one hundred years ago. The scattering mechanism is a three-wave mixing process between two optical fields and one acoustic field and has found a broad range of applications spanning microscopy to ultra-narrow-linewidth lasers. Building on the success of utilizing this nonlinearity at a classical level, a rich avenue is now being opened to explore Brillouin scattering within the paradigm of quantum optics. Here, we take a key step in this direction by employing quantum optical techniques yet to be utilized for Brillouin scattering to characterize the second-order coherence of Stokes scattering across the Brillouin lasing threshold. We use a silica microsphere resonator and single-photon counters to observe the expected transition from bunched statistics of thermal light below the lasing threshold to Poissonian statistics of coherent light above the threshold. Notably, at powers approaching the lasing threshold, we also observe super-thermal statistics, which arise due to instability and a ``flickering'' in and out of lasing as the pump field is transiently depleted. The statistics observed across the transition, including the ``flickering'', are a result of the full nonlinear three-wave mixing process and cannot be captured by a linearized model. These measurements are in good agreement with numerical solutions of the three-wave Langevin equations and are well demarcated by analytical expressions for the instability and the lasing thresholds. These results demonstrate that applying second-order-coherence and photon-counting measurements to Brillouin scattering provides new methods to advance our understanding of Brillouin scattering itself and progress toward quantum-state preparation and characterization of acoustic modes.Comment: Main (8 pages, 2 figures) + Supplementary (6 pages, 1 figures), Submitte

Nonlinear enhanced microresonator gyroscope

Optical gyroscopes based on the Sagnac effect have been the mainstay of inertial navigation in aerospace and shipping for decades. These gyroscopes are typically realized either as ring-laser gyroscopes (RLGs) or fiber-optic gyroscopes (FOGs). With the recent rapid progress in the field of ultrahigh-quality optical whispering-gallery mode and ring microresonators, attention has been focused on the development of microresonator-based Sagnac gyroscopes as a more compact alternative to RLGs and FOGs. One avenue that has been explored is the use of exceptional points in non-Hermitian systems to enhance the responsivity to rotation. We use a similar phenomenon, namely, the critical point of a spontaneous symmetry-breaking transition between counterpropagating light, to demonstrate a microresonator gyroscope with a responsivity enhanced by a factor of around 104. We present a proof-of-principle rotation measurement as well as a characterization of the system’s dynamical response, which shows the universal critical behaviors of responsivity enhancement and critical slowing down, both of which are beneficial in an optical gyroscope. We believe that this concept could be used to realize simple and cheap chip-based gyroscopes with sensitivities approaching those of today’s RLGs and FOGs

Coherent suppression of backscattering in optical microresonators

As light propagates along a waveguide, a fraction of the field can be reflected by Rayleigh scatterers. In high quality-factor whispering-gallery-mode microresonators, this intrinsic backscattering is primarily caused by either surface or bulk material imperfections. For several types of microresonator-based experiments and applications, minimal backscattering in the cavity is of critical importance, and thus the ability to suppress the backscattering is essential. We demonstrate that introducing an additional scatterer in the near-field of a high-quality-factor microresonator can coherently suppress the amount of backscattering in a microresonator by more than 30 dB. The method relies on controlling the scatterer's position in order for the intrinsic and scatterer-induced backpropagating fields to destructively interfere. This technique is useful in microresonator applications where backscattering is currently limiting the performance of devices, such as ring-laser gyroscopes and dual frequency combs that both suffer from injection locking. Moreover, these findings are of interest for integrated photonic circuits in which backreflections could negatively impact the stability of laser sources or other components

Logic Gates Based on Interaction of Counterpropagating Light in Microresonators

Optical logic has the potential to replace electronics with photonic circuits in applications for which optic-to-electronic conversion is impractical and for integrated all-optical circuits. Nonlinear optics in whispering gallery mode resonators provides low power, scalable methods to achieve optical logic. We demonstrate, for the first time, an all-optical, universal logic gate using counterpropagating light in which all signals have the same operating optical frequency. Such a device would make possible the routing of optical signals without the need for conversion into the electronic domain, thus reducing latency. The operating principle of the device is based on the Kerr interaction between counter-propagating beams in a whispering gallery mode resonator which induces a splitting between the resonance frequencies for the two propagating directions. Our gate uses a fused silica microrod resonator with a Q-factor of 2 x 10(8). This method of optical logic gives a practical solution to the on-chip routing of light

μW-Level Microresonator Solitons with Extended Stability Range Using an Auxiliary Laser

The recent demonstration of dissipative Kerr solitons in microresonators has opened a new pathway for the generation of ultrashort pulses and low-noise frequency combs with gigahertz to terahertz repetition rates, enabling applications in frequency metrology, astronomy, optical coherent communications, and laser-based ranging. A main challenge for soliton generation, in particular in ultra-high-Q resonators, is the sudden change of circulating intracavity power during the onset of soliton generation. This sudden power change requires precise control of the seed laser frequency and power or fast control of the resonator temperature. Here, we report a robust and simple way to increase the stability range of the soliton regime by using an auxiliary laser that passively stabilizes the intracavity power. In our experiments with fused silica resonators, we are able to extend the pump laser frequency stability range of microresonator solitons by two orders of magnitude, which enables soliton generation by slow and manual tuning of the pump laser into resonance and at unprecedented low power levels. Both single- and multi-soliton mode-locked states are generated in a 1.3-mm-diameter fused silica microrod resonator with a free spectral range of ~50.6 GHz, at a 1554 nm pump wavelength at threshold powers <3 mW. Moreover, with a smaller 230-{\mu}m-diameter microrod, we demonstrate soliton generation at 780 {\mu}W threshold power. The passive enhancement of the stability range of microresonator solitons paves the way for robust and low threshold microcomb systems with substantially relaxed stability requirements for the pump laser source. In addition, this method could be useful in a wider range of microresonator applications that require reduced sensitivity to external perturbations

Non-Gaussian mechanical motion via single and multi-phonon subtraction from a thermal state

Quantum optical measurement techniques offer a rich avenue for quantum control of mechanical oscillators via cavity optomechanics. In particular, a powerful yet little explored combination utilizes optical measurements to perform heralded non-Gaussian mechanical state preparation followed by tomography to determine the mechanical phase-space distribution. Here, we experimentally perform heralded single- and multi-phonon subtraction via photon counting to a laser-cooled mechanical thermal state with a Brillouin optomechanical system at room temperature, and use optical heterodyne detection to measure the s-parameterized Wigner distribution of the non-Gaussian mechanical states generated. The techniques developed here advance the state-of-the-art for optics-based tomography of mechanical states and will be useful for a broad range of applied and fundamental studies that utilize mechanical quantum-state engineering and tomography