2,418 research outputs found
Fixed Point Index for Weakly Inward Mappings
AbstractThe fixed point index for weakly inward mappings, which are not cone mappings, is defined in this paper. Its properties are also investigated. Consequently we study the derivatives of weakly inward mappings and nonzero fixed points of such mappings
Optical Limiting in Single-walled Carbon Nanotube Suspensions
Optical limiting behaviour of suspensions of single-walled carbon nanotubes
in water, ethanol and ethylene glycol is reported. Experiments with 532 nm, 15
nsec duration laser pulses show that optical limiting occurs mainly due to
nonlinear scattering. The observed host liquid dependence of optical limiting
in different suspensions suggests that the scattering originates from
microbubbles formed due to absorption-induced heating.Comment: 10 pages, 5 eps figures, to appear in Chem. Phys. Let
Causes and consequences of pair-bond disruption in a sex-skewed population of a long-lived monogamous seabird
Effects of crossed states on photoluminescence excitation spectroscopy of InAs quantum dots
In this report, the influence of the intrinsic transitions between bound-to-delocalized states (crossed states or quasicontinuous density of electron-hole states) on photoluminescence excitation (PLE) spectra of InAs quantum dots (QDs) was investigated. The InAs QDs were different in size, shape, and number of bound states. Results from the PLE spectroscopy at low temperature and under a high magnetic field (up to 14 T) were compared. Our findings show that the profile of the PLE resonances associated with the bound transitions disintegrated and broadened. This was attributed to the coupling of the localized QD excited states to the crossed states and scattering of longitudinal acoustical (LA) phonons. The degree of spectral linewidth broadening was larger for the excited state in smaller QDs because of the higher crossed joint density of states and scattering rate
Oxygen impurities in NiAl: Relaxation effects
We have used a full-potential linear muffin-tin orbital method to calculate
the effects of oxygen impurities on the electronic structure of NiAl. Using the
supercell method with a 16-atom supercell we have investigated the cases where
an oxygen atom is substitutionally placed at either a nickel or an aluminum
site. Full relaxation of the atoms within the supercell was allowed. We found
that oxygen prefers to occupy a nickel site over an aluminum site with a site
selection energy of 138 mRy (21,370 K). An oxygen atom placed at an aluminum
site is found to cause a substantial relaxation of its nickel neighbors away
from it. In contrast, this steric repulsion is hardly present when the oxygen
atom occupies the nickel site and is surrounded by aluminum neighbors. We
comment on the possible relation of this effect to the pesting degradation
phenomenon (essentially spontaneous disintegration in air) in nickel
aluminides.Comment: To appear in Phys. Rev. B (Aug. 15, 2001
Adiabatic evolution under quantum control
One of the difficulties in adiabatic quantum computation is the limit on the
computation time. Here we propose two schemes to speed-up the adiabatic
evolution. To apply this controlled adiabatic evolution to adiabatic quantum
computation, we design one of the schemes without any prior knowledge of the
instantaneous eigenstates of the final Hamiltonian. Whereas in another scheme,
the control is constructed with the instantaneous eigenstate that is the target
state of the control. As an illustration, we study a two-level system driven by
a time-dependent magnetic field under the control. The physics behind the
control scheme is explained.Comment: 5 pages, 3 figure
Metamaterial Polarization Converter Analysis: Limits of Performance
In this paper we analyze the theoretical limits of a metamaterial converter
that allows for linear-to- elliptical polarization transformation with any
desired ellipticity and ellipse orientation. We employ the transmission line
approach providing a needed level of the design generalization. Our analysis
reveals that the maximal conversion efficiency for transmission through a
single metamaterial layer is 50%, while the realistic re ection configuration
can give the conversion efficiency up to 90%. We show that a double layer
transmission converter and a single layer with a ground plane can have 100%
polarization conversion efficiency. We tested our conclusions numerically
reaching the designated limits of efficiency using a simple metamaterial
design. Our general analysis provides useful guidelines for the metamaterial
polarization converter design for virtually any frequency range of the
electromagnetic waves.Comment: 10 pages, 11 figures, 2 table
Brominated flame retardants in Canadian chicken egg yolks
Chicken eggs categorised as conventional, omega-3 enriched, free range and organic were collected at grading stations in three regions of Canada between 2005 and 2006. Free run eggs, which were only available for collection from two regions, were also sampled during this time frame. Egg yolks from each of these egg types (n = 162) were analysed to determine brominated flame retardant levels, specifically polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCD). PBDEs were detected in 100% of the 162 samples tested, while HBCD was observed in 85% of the egg yolks. Total PBDE concentrations in egg yolks ranged from 0.018 to 20.9 ng g−1 lipid (median = 3.03 ng g−1 lipid), with PBDE 209 identified as being the major contributor to ΣPBDE concentrations. In addition to PBDE 209, PBDE 99, 47, 100, 183 and 153 were important contributors to ΣPBDE concentrations. Total HBCD concentrations ranged from below the limit of detection to a maximum concentration of 71.9 ng g−1 lipid (median = 0.053 ng g−1 lipid). The α-isomer was the dominant contributor to ΣHBCD levels in Canadian egg yolks and was the most frequently detected HBCD isomer. ΣPBDE levels exhibited large differences in variability between combinations of region and type. ΣHBCD concentrations were not significantly different among regions, although differences were observed between the different types of egg yolks analysed in the present study
Comparison of Differential Pulse Voltammetry (DPV)-a new method of carbamazepine analysis-with Fluorescence Polarization Immunoassay (FPIA)
Carbamazepine is a widely used anti-epileptic drug with narrow therapeutic range. Many methods have been developed for monitoring the serum drug level. Differential pulse voltammetry (DPV), an electrochemical method advantaged by simple, inexpensive, and relatively short analysis time, has recently been developed for carbamazepine detection. We used a newly developed DPV method with glassy carbon as a working electrode to determine the carbamazepine level. The performance of DPV is compared with the widely used fluorescence polarization immunoassay (FPIA) technique in precision, accuracy, linearity and detection limit. The precision, linearity and accuracy of the DPV and FPIA techniques were comparable at most clinical used levels. The detection limit was 1 mu g/mL for the DPV technique and 0.5 mu g/mL for the FPIA technique. The performance of the DPV technique was within the FDA guidelines for bioanalytical methods, which ensures the clinical applicability of the DPV technique. The DPV technique may have the potential to be a good alternative for carbamazepine analysis
Recommended from our members
Characterization of submicron particles influenced by mixed biogenic and anthropogenic emissions using high-resolution aerosol mass spectrometry: Results from CARES
An Aerodyne high resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS) was deployed during the Carbonaceous Aerosols and Radiative Effects Study (CARES) that took place in northern California in June 2010. We present results obtained at Cool (denoted as the T1 site of the project) in the foothills of the Sierra Nevada Mountains, where intense biogenic emissions are periodically mixed with urban outflow transported by daytime southwesterly winds from the Sacramento metropolitan area. During this study, the average mass loading of submicrometer particles (PM1) was 3.0 μg m−3, dominated by organics (80%) and sulfate (9.9%). The organic aerosol (OA) had a nominal formula of C1H1.38N0.004OM0.44, thus an average organic mass-to-carbon (OM/OC) ratio of 1.70. Two distinct oxygenated OA factors were identified via Positive matrix factorization (PMF) of the high-resolution mass spectra of organics. The more oxidized MO-OOA (O/C = 0.54) was interpreted as a surrogate for secondary OA (SOA) influenced by biogenic emissions whereas the less oxidized LO-OOA (O/C = 0.42) was found to represent SOA formed in photochemically processed urban emissions. LO-OOA correlated strongly with ozone and MO-OOA correlated well with two 1st generation isoprene oxidation products (methacrolein and methyl vinyl ketone), indicating that both SOAs were relatively fresh. A hydrocarbon like OA (HOA) factor was also identified, representing primary emissions mainly due to local traffic. On average, SOA (= MO-OOA + LO-OOA) accounted for 91% of the total OA mass and 72% of the PM1 mass observed at Cool. Twenty three periods of urban plumes from T0 (Sacramento) to T1 (Cool) were identified using the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem). The average PM1 mass loading was considerably higher in urban plumes than in air masses dominated by biogenic SOA. The change in OA mass relative to CO (ΔOA/ΔCO) varied in the range of 5-196 μg m−3 ppm−1, reflecting large variability in SOA production. The highest ΔOA/ΔCO was reached when air masses were dominated by anthropogenic emissions in the presence of a high concentration of biogenic volatile organic compounds (BVOCs). This ratio, which was 97 μg m−3 ppm−1 on average, was much higher than when urban plumes arrived in a low BVOC environment (~36 μg m−3 ppm−1) or during other periods dominated by biogenic SOA (35 μg m−3 ppm−1). These results demonstrate that SOA formation is enhanced when anthropogenic emissions interact with biogenic precursors
- …