Nonsteady flow-direction measurement

Nonsteady flow probe uses miniature pressure transducers mounted within probe support very close to tube inlets. Response speed depends on internal volume between tube inlet and pressure transducer location

Extracting (n,g) direct capture cross sections from Coulomb dissociation: application to 14^{14}C(n,γ\gamma)15^{15}C

A methodology for extracting neutron direct capture rates from Coulomb dissociation data is developed and applied to the Coulomb dissociation of 15C on 208Pb at 68 MeV/nucleon. Full Continuum Discretized Coupled Channel calculations are performed and an asymptotic normalization coefficient is determined from a fit to the breakup data. Direct neutron capture calculations using the extracted asymptotic normalization coefficient provide $(n,\gamma)$ cross sections consistent with direct measurements. Our results show that the Coulomb Dissociation data can be reliably used for extracting the cross section for 14C(n,g)15C if the appropriate reaction theory is used. The resulting error bars are of comparable magnitude to those from the direct measurement. This procedure can be used more generally to extract capture cross sections from breakup reactions whenever the desired capture process is fully peripheral.Comment: submitted to Phys. Rev. C (R

Are Tax Cuts Really Expansionary?

In this paper, we re-examine the standard analysis of the short-run effect of a personal tax cut. If consumer spending generates more money demand than other components of GNP, then tax cuts may, by increasing the demand for money, depress aggregate demand. We examine a variety of evidence and conclude that the necessary condition for contractionary tax cuts is probably satisfied for the U.S. economy.

Stirring and transport enhancement in a continuously modulated free-surface flow

The transport of fluid from a recirculation region adjacent to a free surface is studied using a numerical method validated with experimental flow visualization. The flow is an example of a liquid film coating process, and consists of two counter-rotating rolls placed side-by-side and half-submerged in a bath of fluid. In the gap between the rolls a recirculation zone exists just below the free surface, around which the flow splits into two films. Fluid recirculating for long periods has been identified as a source of coating defects, so this paper considers a possible method of inducing stirring. The flow is modulated by driving one of the rolls through a Hooke's joint, which delivers a well-characterized periodic perturbation to the roll speed. In response to this speed modulation, the free surface undergoes a periodic change in position and shape which drives an exchange of fluid between the recirculation region and the surrounding flow. The amplitude of the free-surface motion is strongly dependent on modulation frequency. The dynamics of the free surface preclude a quasi-steady approach, even in the small-frequency limit, and so a fully time-dependent analysis based on the finite element method is employed. Trigonometric temporal interpolation of the finite element data is used to make passive tracer advection calculations more efficient, and excellent agreement is seen between simulation and experiment. Computations of the stable and unstable invariant manifolds associated with periodic points on the free surface reveal that the exchange of fluid is governed by a self-intersecting turnstile mechanism, by which most fluid entrained during a modulation cycle is ejected later in the same cycle. Transport over several cycles is explored by observation of the evacuation of passive tracers initially distributed uniformly in the recirculation zone. Results demonstrate the persistence of unmixed cores whose size is dependent on the modulation frequency. By considering the percentage of tracers remaining after a fixed number of cycles, contours in frequency-amplitude space show that for each modulation amplitude there is a frequency which produces the most effective transport, with up to 80 % of tracers removed by a modulation which produces only a 5 % change in film thickness. Finally it is shown how modulation of both rolls at slightly different phases can reduce the film thickness variation to about 1 % while maintaining the level of transport

Do Long-Term Interest Rates Overreact to Short-Term Interest Rates?

macroeconomics, interest rates, short-term, long-term