26 research outputs found
Evaluation of sesamum gum as an excipient in matrix tablets
In developing countries modern medicines are often beyond the affordability of the majority of the population. This is due to the reliance on expensive imported raw materials despite the abundance of natural resources which could provide an equivalent or even an improved function. The aim of this study was to investigate the potential of sesamum gum (SG) extracted from the leaves of Sesamum radiatum (readily cultivated in sub-Saharan Africa) as a matrix former. Directly compressed matrix tablets were prepared from the extract and compared with similar matrices of HPMC (K4M) using theophylline as a model water soluble drug. The compaction, swelling, erosion and drug release from the matrices were studied in deionized water, 0.1 N HCl (pH 1.2) and phosphate buffer (pH 6.8) using USP apparatus II. The data from the swelling, erosion and drug release studies were also fitted into the respective mathematical models. Results showed that the matrices underwent a combination of swelling and erosion, with the swelling action being controlled by the rate of hydration in the medium. SG also controlled the release of theophylline similar to the HPMC and therefore may have use as an alternative excipient in regions where Sesamum radiatum can be easily cultivated
Influence of binder type and process parameters on the compression properties and microbial survival in diclofenac tablet formulations
Compaction, compression and drug release properties of diclofenac sodium and ibuprofen pellets comprising xanthan gum as a sustained release agent
Compaction and compression of xanthan gum pellets were evaluated and drug release from tablets made of pellets was characterised. Two types of pellets were prepared by extrusion-spheronisation. Formulations included xanthan gum, at 16% (w/w), diclofenac sodium or ibuprofen, at 10% (w/w), among other excipients. An amount of 500 mg of pellets fraction 1000-1400 [mu]m were compacted in a single punch press at maximum punch pressure of 125 MPa using flat-faced punches (diameter of 1.00 cm). Physical properties of pellets and tablets were analysed. Laser profilometry analysis and scanning electron microscopy of the upper surface and the surface of fracture of tablets revealed that particles remained as coherent individual units after compression process. Pellets were flatted in the same direction of the applied stress evidencing a lost of the original curvature of the spherical unit. Pellets showed close compressibility degrees (49.9% for pellets comprising diclofenac sodium and 48.5% for pellets comprising ibuprofen). Xanthan gum pellets comprising diclofenac sodium experienced a reduction of 65.5% of their original sphericity while those comprising ibuprofen lost 49.6% of the original porosity. Permanent deformation and densification were the relevant mechanisms of compression. Fragmentation was regarded as non-existent. The release of the model drug from both type of tablets revealed different behaviours. Tablets made of pellets comprising ibuprofen released the model drug in a bimodal fashion and the release behaviour was characterised as Case II transport mechanism (release exponent of 0.93). On the other hand, the release behaviour of diclofenac sodium from tablets made of pellets was anomalous (release exponent of 0.70). For the latter case, drug diffusion and erosion were competing mechanisms of drug release.http://www.sciencedirect.com/science/article/B6T7W-4FR3ND1-1/1/7bebf72d7c381f0ef545c3c20689017
Development and Evaluation of Ca+ 2 Ion Cross-Linked Carboxymethyl Xanthan Gum Tablet Prepared by Wet Granulation Technique
Individual and interacting effects of formulation variables on the tensile strength and microbial survival in diclofenac tablets
Formulation variables affecting drug release from xanthan gum matrices at laboratory scale and pilot scale
Novel mathematical method for quantitative expression of deviation from the Higuchi model
A simple mathematical method to express the deviation in release profile of a test product following Higuchi's kinetics from an ideal Higuchi release profile was developed. The method is based on calculation of area under the curve (AUC) by using the trapezoidal rule. The precision of prediction depends on the number of data points. The method is exemplified for 2 dosage forms (tablets of diltiazem HCl and microspheres of diclofenac sodium) that are designed to release the drug over a 12-hour period. The method can be adopted for the formulations where drug release is incomplete (<100%) or complete (100%) at last sampling time. To describe the kinetics of drug release from the test formulation, zero-order, first-order, Higuchi's. Hixson-Crowell's, and Weibull's models were used. The criterion for selecting the most appropriate model was based on the goodness-of-fit test. The release kinetics of the tablets and microspheres were explained by the Higuchi model. The release profiles of the test batches were slightly below the ideal Higuchi release profile. For the test products, observed percentage deviation from an ideal Higuchi profile is less than 16% for tablets and less than 11% for microspheres. The proposed method can be extended to the modified release formulations that are designed to release a drug over 6, 18, or 24 hours. If the data points are not evenly separated, the ideal drug release profile and AUC are calculated according to the specific sampling time. The proposed method may be used for comparing formulated products during the research and development stage, for quality control of the products, or for promoting products by comparing performance of the test product with that of the innovator's product
Desenvolvimento de formadores de filmes poliméricos orgânico-inorgânico para liberação controlada de fármacos e tratamento de feridas
Guar Gum, Xanthan Gum, and HPMC Can Define Release Mechanisms and Sustain Release of Propranolol Hydrochloride
The objectives were to characterize propranolol hydrochloride-loaded matrix tablets using guar gum, xanthan gum, and hydroxypropylmethylcellulose (HPMC) as rate-retarding polymers. Tablets were prepared by wet granulation using these polymers alone and in combination, and physical properties of the granules and tablets were studied. Drug release was evaluated in simulated gastric and intestinal media. Rugged tablets with appropriate physical properties were obtained. Empirical and semi-empirical models were fit to release data to elucidate release mechanisms. Guar gum alone was unable to control drug release until a 1:3 drug/gum ratio, where the release pattern matched a Higuchi profile. Matrix tablets incorporating HPMC provided near zero-order release over 12 h and erosion was a contributing mechanism. Combinations of HPMC with guar or xanthan gum resulted in a Higuchi release profile, revealing the dominance of the high viscosity gel formed by HPMC. As the single rate-retarding polymer, xanthan gum retarded release over 24 h and the Higuchi model best fit the data. When mixed with guar gum, at 10% or 20% xanthan levels, xanthan gum was unable to control release. However, tablets containing 30% guar gum and 30% xanthan gum behaved as if xanthan gum was the sole rate-retarding gum and drug was released by Fickian diffusion. Release profiles from certain tablets match 12-h literature profiles and the 24-h profile of Inderal® LA. The results confirm that guar gum, xanthan gum, and HPMC can be used for the successful preparation of sustained release oral propranolol hydrochoride tablets