1,337 research outputs found
Hierarchical Lossless Image Compression for Telemedicine Applications
AbstractThe main aim of hierarchical lossless image compression is to improve accuracy, reduce the bit rate and improve the compression efficiency for the storage and transmission of the medical images while maintain an acceptable image quality for diagnosis purpose. The cost and limitation in bandwidth of wireless channels has made compression is necessity in today's era. In medical images, the contextual region is an area which contains an important information and must be transmitted without distortion. In this paper the selected region of the image is encoded with Adaptive Multiwavelet Transform AMWT) using Multi Dimensional Layered Zero Coding (MLZC). Experimental results shows that Peak Signal to Noise Ratio (PSNR), Correlation Coefficient (CC), Mean Structural Similarity Index (MSSIM) performance is high and Root Mean Square Error (RMSE), Mean Absolute Error (MAE) values are low, and moderate Compression Ratio (CR) at high Bits Per Pixel (BPP) when compared to the integer wavelet and multiwavelet transform
5-(4-Chlorophenyl)-1-methyl-3-oxocyclohexanecarbonitrile
In the title molecule, C14H14ClNO, the cyclohexane ring adopts a chair conformation. The cyano group and the methyl group have axial and equatorial orientations, respectively. The benzene ring has an equatorial orientation. A C—H⋯π interaction involving the benzene ring is found in the crystal structure
Clinical profile of patients with cardiac syndrome X in a tertiary care hospital
Background: Abnormalities in coronary microcirculation may lead to symptoms of chest pain which mimics angina. Symptoms of chest pain along with evidence of ischemia on non-invasive tests like electrocardiography (ECG), echocardiography or treadmill test (TMT) but with normal coronary angiogram (CAG) is referred to as cardiac syndrome X (CSX). Previous studies have shown favourable prognosis in such patients. However recent studies have not shown good prognosis. We intend to understand whether such adverse cardiovascular outcomes could be secondary to any change in the clinical characteristics of patients with CSX in the current era.Methods: This is a retrospective study which was conducted at a tertiary care hospital. CAG of patients who underwent coronary angiography between November 2013 and October 2016, for suspected ischemic heart disease was reviewed. Clinical characteristics of patients with normal or non-obstructive coronaries (less than 50% stenosis) in angiography with chest pain were analyzed. Further clinical characteristics, ECG, echocardiography, treadmill test and CAG findings were compared among males and females.Results: 410 patients were included in the study. 212 were females and 198 were males. Mean age of presentation was 53.46±10.5 years for males and 55.04±9.3 years for females. Patients presenting with atypical chest pain were higher (70.7%). There were 195 subjects with systemic hypertension, 103 with diabetes mellitus and 57 had dyslipidemia. In the study, most 260 subjects had ST-T changes on ECG. Abnormal echocardiography was seen in only 35 patients. 30.5% patients showed positive stress test for inducible ischemia.Conclusions: CSX is prevalent in significant number of patients who present with symptoms of chest pain. Unlike previous studies, there is no significant difference among males and females, in prevalence and risk factors for this syndrome. Further non-obstructive lesions were found to be higher in females
Development of Technology for Large Scale Production of Titanium Sponge
Intensive investigations on the development of titanium metal production technology had been carried out during 1965-1975 at the Bhabha Atomic Research Centre, Bombay and at the Nuclear Fuel Complex, Hyderabad. The Defence Metallurgical Research Laboratory, Hyderabad has set up a ‘Titanium Sponge Experimental Facility’ with a capacity to produce 100 tonnes of sponge per annum in 2000 kg batches by the Kroll’s process with a view to optimising technology for large scale production.The paper presents an outline of the experimental facility and discusses the various considerations that have gone into the design of equipment, materials of construction, process selection, etc. The facility has gone into operation in March,1985. The results obtained so far are encouraging
Issues in federally supported research on advanced automotive power systems
Based on research supported by Division of Policy Research and Analysis, National Science Foundation, under grant no. PRA-768101
Adaptations of the antioxidant system in erythrocytes of trained adult rats: Impact of intermittent hypobaric-hypoxia at two altitudes
We have investigated the effects of daily exposure to intermittent hypobaric-hypoxia to two simulated altitudes (5700 m and 6300 m) in adult male rats that had been regularly swim trained in normoxia at sea level prior to exposures. Superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GSH-Px) along with the oxidative stress (OS) indices, malondialdehyde (MDA) and protein carbonyl content were measured in erythrocytes and their membranes. Hemoglobin increased in the trained animals exposed to 5700 m and in untrained rats exposed to 6300 m. Osmotic fragility in terms of hemolysis increased in altitude exposed animals. SOD increased in those exposed to 6300 m, while CAT increased in trained rats exposed to 5700 m and to 6300 m unlike in untrained rats where CAT increased only at 6300 m. GSH-Px showed varying degrees of elevation in all animals exposed to both altitudes. Erythrocyte membranes showed significant elevations in malondialdehyde (MDA) at 6300 m, while elevated protein carbonyls were noticeable at both altitudes in whole cells and membranes. These results suggest a positively associated elevation in protein oxidation with altitude in trained rats. At 5700 m, animals were less stressed, unlike at 6300 m, as seen from the magnitude of elevations in the OS indices and from the responses of the antioxidant enzymes. © 2005 Elsevier Inc. All rights reserved
Effects of energy release on near field flow structure of gas jets
The primary objective is to understand how buoyancy affects the structure of the shear layer, the development of fluid dynamic instabilities, and formation of the coherent structures in the near-nozzle regions of gas jets. The secondary objectives are to study the role of buoyancy in lifting and reattachment process of diffusion flames, to evaluate the scaling behavior of diffusion flames, and to aid development and/or validation of theoretical models by providing quantitative data in the absence of buoyancy. Fast reacting hydrogen or hydrogen-inert fuels are used to isolate the effects of buoyancy on fluid dynamics without masking the flame behavior by soot and radiative heat transfer. This choice of fuel also permits an evaluation of simulating low gravity in low pressure ground experiments because the similarity constraints are relaxed for the fast reacting, nonsooting diffusion flames. The diagnostics consists primarily of a color schlieren system coupled with computer generated rainbow filters, video recording, and image analysis. The project involves (1) drop tower experiments, (2) ground experiments, and (3) theoretical analysis
Structural heat treatments against Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae): effect of flour depth, life stage and floor.
The effect of high temperatures (50-60°C) and two levels of sanitation (~0.5 and 43 g of flour), on mortality of eggs, young larvae, old larvae, pupae, and adults of the red flour beetle, Tribolium castaneum, were evaluated during heat treatment of a pilot flour mill at Kansas State University. The mill was heated once during 13-14 May 2009 and once during 25-26 August 2009. Each of the heat treatments lasted 24 h. Bioassay boxes, with life stages of T. castaneum and temperature sensors confined in small compartments, were placed in 25 locations across all five mill floors. Temperature data showed that the mean time to 50°C based on the two treatments ranged from 10.39 to 17.18 h, and the mean time above 50°C ranged from 6.01 to 13.63 h. The mean maximum temperatures attained ranged from 50.7 to 61.4°C. In general, temperatures were lower in compartments with 43 g of flour when compared with compartments with 0.5 g of flour. Temperatures were also lower on the first floor than on the remaining floors. In box bioassays, essentially none of the life stages survived the 24 h heat treatment (99-100% mortality), except on the first floor. The survival of insects, especially on the first floor, is related to how quickly temperatures reached 50°C and how long temperatures were held between 50 and 60°C, and the maximum temperatures attained at a given location. There were only small differences in mortality between the two levels of sanitation. These results show that heat treatment of flour mills can control all life stages of T. castaneum in 24 h. Keywords: Tribolium castaneum, Heat treatment, Sanitation, Life stages, Methyl bromide alternative
Heat treatment: A viable methyl bromide alternative for managing stored-product insects in food-processing facilities
Heat treatment involves raising and maintaining temperatures of grain storage structures, warehouses, and food-processing facilities between 50 to 60°C to manage stored-product insect species. The duration of heat treatment is application-specific and may vary from 6 h for an empty storage facility to 24 h for an entire food-processing facility. Laboratory and commercial trials with high temperatures during the last decade, especially with forced air gas heaters, have resulted in a wealth of information on (1) understanding responses of insect species and life stages to heat, (2) heat distribution within a treated area, and (3) techniques necessary for gauging effectiveness of commercial heat treatments. Insect responses vary with the temperature, among species, and within a species among life stages. Air movement and strategic placement of fans are important for eliminating cool spots.Keywords: Heat, Forced air, Flour mills, Methyl bromide alternativ
- …