Degrees of order : A comparison of nanocrystal and amorphous solids for poorly soluble drugs

Poor aqueous solubility is currently a prevalent issue in the development of small molecule pharmaceuticals. Several methods are possible for improving the solubility, dissolution rate and bioavailability of Biopharmaceutics Classification System (BCS) class II and class IV drugs. Two solid state approaches, which rely on reductions in order, and can theoretically be applied to all molecules without any specific chemical prerequisites (compared with e.g. ionizable or co-former groups, or sufficient lipophilicity), are the use of the amorphous form and nanocrystals. Research involving these two approaches is relatively extensive and commercial products are now available based on these technologies. Nevertheless, their formulation remains more challenging than with conventional dosage forms. This article describes these two technologies from both theoretical and practical perspectives by briefly discussing the physicochemical backgrounds behind these approaches, as well as the resulting practical implications, both positive and negative. Case studies demonstrating the benefits and challenges of these two techniques are presented.Peer reviewe

Non-linear optical imaging – Introduction and pharmaceutical applications

Nonlinear optical imaging is an emerging technology with much potential in pharmaceutical analysis. The technique encompasses a range of optical phenomena, including coherent anti-Stokes Raman scattering (CARS), second harmonic generation (SHG), and twophoton excited fluorescence (TPEF). The combined potential of these phenomena for pharmaceutical imaging includes chemical and solidstate specificity, high optical spatial and temporal resolution, nondestructive and non-contact analysis, no requirement for labels, and the compatibility with imaging in aqueous and biological environments. In this article, the theory and practical aspects of nonlinear imaging are briefly introduced and pharmaceutical and biopharmaceutical applications are considered. These include material and dosage form characterization, drug release, and drug and nanoparticle distribution in tissues and within live cells. The advantages and disadvantages of the technique in the context of these analyses are also discussed

Isomalt and its diastereomer mixtures as stabilizing excipients with freeze-dried lactate dehydrogenase

The purpose of this research was to study isomalt as a protein-stabilizing excipient with lactate dehydrogenase (LDH) during freeze-drying and subsequent storage and compare it to sucrose, a standard freeze-drying excipient. Four different diastereomer mixtures of isomalt were studied. The stability of the protein was studied with a spectrophotometric enzyme activity test and circular dichroism after freeze-drying and after 21 days of storage at 16% RH. Physical stability was analyzed with differential scanning calorimetry and Karl Fischer titration. Statistical analysis was utilized in result analysis. LDH activity was almost completely retained after freeze-drying with sucrose; whereas samples stabilized with isomalt diastereomer mixtures had a considerably lower protein activity. During storage the sucrose-containing samples lost most of their enzymatic activity, while the isomalt mixtures retained the protein activity better. In all cases changes to protein secondary structure were observed. Isomalt diastereomer mixtures have some potential as protein-stabilizing excipients during freeze-drying and subsequent storage. Isomalt stabilized LDH moderately during freeze-drying; however it performed better during storage. Future studies with other proteins are required to evaluate more generally whether isomalt would be a suitable excipient for pharmaceutical freeze-dried protein formulations.Peer reviewe

Crystallization Kinetics of an Amorphous Pharmaceutical Compound Using Fluorescence-Lifetime-Imaging Microscopy

Pharmaceutical scientists are increasingly interested in amorphous drug formulations especially because of their higher dissolution rates. Consequently, the thorough characterization and analysis of these formulations are becoming more and more important for the pharmaceutical industry. Here, fluorescence lifetime-imaging microscopy (FLIM) was used to monitor the crystallization of an amorphous pharmaceutical compound, indomethacin. Initially, we identified different solid indomethacin forms, amorphous and gamma- and alpha-crystalline, on the basis of their time-resolved fluorescence. All of the studied indomethacin forms showed biexponential decays with characteristic fluorescence lifetimes and amplitudes. Using this information, the crystallization of amorphous indomethacin upon storage in 60 degrees C was monitored for 10 days with FLIM. The progress of crystallization was detected as lifetime changes both in the FLIM images and in the fluorescence-decay curves extracted from the images. The fluorescence-lifetime amplitudes were used for quantitative analysis of the crystallization process. We also demonstrated that the fluorescence-lifetime distribution of the sample changed during crystallization, and when the sample was not moved between measuring times, the lifetime distribution could also be used for the analysis of the reaction kinetics. Our results clearly show that FLIM is a sensitive and nondestructive method for monitoring solid-state transformations on the surfaces of fluorescent samples.Peer reviewe

Machine-Vision-Enabled Salt Dissolution Analysis

Salt formation is a well-established method to increase the solubility of ionizable drug candidates. However, possible conversion of salt to its original form of free acid or base - disproportionation - can have a drastic effect on the solubility and consequently the bioavailability of a drug. Therefore, during the salt selection process, the salt dissolution behavior should be well understood. Improved understanding could be achieved by a method that enables simultaneous screening of small sample amounts and detailed dissolution process analysis. Here, we use a machine-vision-based single-particle analysis (SPA) method to successfully determine the pH-solubility profile, intrinsic solubility, common-ion effect, pKa, pHmax, and Ksp values of three model compounds in a fast and low sample consumption (<1 mg) manner. Moreover, the SPA method enables, with a particle- scale resolution, in situ observation of the disproportionation process and its immediate effect on the morphology and solubility of dissolving species. In this study, a potentially higher energy thermodynamic solid-state form of diclofenac free acid and an intriguing conversion to liquid verapamil free base were observed upon disproportionation of the respective salts. As such, the SPA method offers a low sample consumption platform for fast yet elaborate characterization of the salt dissolution behavior.Peer reviewe

Image-based dissolution analysis for tracking the surface stability of amorphous powders

Poor solubility of crystalline drugs can be overcome by amorphization - the production of high-energy disordered solid with improved solubility. However, the improved solubility comes at a cost of reduced stability; amorphous drugs are prone to recrystallization. Because of recrystallization, the initial solubility enhancement is eventually lost. Therefore, it is important to understand the recrystallization process during storage of amorphous materials and its impact on dissolution/solubility. Here, we demonstrate the use of image-based single-particle analysis (SPA) to consistently monitor the solubility of an amorphous indomethacin sample over time. The results are compared to the XRPD signal of the same sample. For the sample stored at 22 degrees C/23 % relative humidity (RH), full crystallinity as indicated by XRPD was reached around day 40, whereas a solubility corresponding to that of the. crystalline form was measured with SPA at day 25. For the sample stored at 22 degrees C/75 % RH, the XRPD signal indicated a rapid initial phase of crystallization. However, the sample failed to fully crystallize in 80 days. With SPA, solubility slightly above that of the crystalline. form was measured already on the second day. To conclude, the solubility measured with SPA directly reflects the solid-state changes occurring on the particle surface. Therefore, it can provide vital information - in a straightforward manner while requiring only minuscule sample amounts - for understanding the effect of storage conditions on the dissolution/solubility of amorphous materials, especially important in pharmaceutical science.Peer reviewe

Image-Based Investigation : Biorelevant Solubility of α and γ Indomethacin

Solubility is a physicochemical property highly dependent on the solid-state form of a compound. Thus, alteration of a compound’s solid-state form can be undertaken to enhance the solubility of poorly soluble drug compounds. In the Biopharmaceutics Classification System (BCS), drugs are classified on the basis of their aqueous solubility and permeability. However, aqueous solubility does not always correlate best with in vivo solubility and consequently bioavailability. Therefore, the use of biorelevant media is a more suitable approach for mimicking in vivo conditions. Here, assessed with a novel image-based single-particle-analysis (SPA) method, we report a constant ratio of solubility increase of 3.3 ± 0.5 between the α and γ solid-state forms of indomethacin in biorelevant media. The ratio was independent of pH, ionic strength, and surfactant concentration, which all change as the drug passes through the gastrointestinal tract. On the basis of the solubility ratio, a free-energy difference between the two polymorphic forms of 2.9 kJ/mol was estimated. Lastly, the use of the SPA approach to assess solubility has proven to be simple, fast, and both solvent- and sample-sparing, making it an attractive tool for drug development.Peer reviewe

Low- versus Mid-frequency Raman Spectroscopy for in Situ Analysis of Crystallization in Slurries

Slurry studies are useful for exhaustive polymorph and solid-state stability screening of drug compounds. Raman spectroscopy is convenient for monitoring crystallization in such slurries, as the measurements can be performed in situ even in aqueous environments. While the mid-frequency region (400-4000 cm(-1)) is dominated by intramolecular vibrations and has traditionally been used for such studies, the low-frequency spectral region (Peer reviewe

Direct Measurement of Amorphous Solubility

Amorphous materials exhibit distinct physicochemical properties compared to their respective crystalline counterparts. One of these properties, the increased solubility of amorphous materials, is exploited in the pharmaceutical industry as a way of increasing bioavailability of poorly water-soluble drugs. Despite the increasing interest in drug amorphization, the analytical physicochemical toolbox is lacking a reliable method for direct amorphous solubility assessment. Here, we show, for the first time, a direct approach to measure the amorphous solubility of diverse drugs by combining optics with fluidics, the single particle analysis (SPA) method. Moreover, a comparison was made to a theoretical estimation based on thermal analysis and to a standardized supersaturation and precipitation method. We have found a good level of agreement between the three methods. Importantly, the SPA method allowed for the first experimental measurement of the amorphous solubility for griseofulvin, a fast crystallizing drug, without the use of a crystallization inhibitor. In conclusion, the SPA approach enables rapid and straightforward determination of the supersaturation potential for amorphous materials of less than 0.1 mg, which could prove highly beneficial in the fields of materials science, analytical chemistry, physical chemistry, food science, pharmaceutical science, and others.Peer reviewe

Fast imaging-based single particle analysis method for solubility determination

The solubility and dissolution rates of chemical compounds are crucial properties in several fields of industry and research. However, accurate, rapid and green methods for their measurement, which only consume micrograms of compound, are lacking. Here, the unique approach of non-specific, image-based single particle analysis (SPA) for solubility testing is directly compared to and thus validated on the mid-solubility range with the current gold standard shake-flask method with UV-Vis spectroscopy employed for determining sample concentrations. Five biologically active compounds representing a range of physicochemical properties including pK(a) and logP were analyzed with both methods. The comparison of SPA and the shake-flask (SF) analysis shows excellent linear correlation (R-2 = 0.99). Higher variability of the SPA method is attributed to variability between the properties of individual particles, which cannot be detected with traditional methods. Due to the similar average solubility values compared to those produced with SF, it is concluded that the SPA method has great potential as an analytical tool for small-scale solubility studies. It also has several practical advantages over the current gold standard shake-flask method, such as speed, low consumables consumption, and no requirement for prior knowledge of compound chemistry.Peer reviewe