1,111 research outputs found
A physically based fluorescent lamp model for a SPICE or a simulink environment
This paper describes a method of modeling fluorescent lamps. The lamp model can be implemented in all major circuit simulation software packages, an example has been given for SPICE and Simulink. The model is based upon a simplified set of physical equations that gives the model validity over a wider range of operating conditions than current fluorescent lamp SPICE models allow for. The model can be used to model any low-pressure mercury-buffer gas fluorescent lamps by entering key lamp parameters, length, radius, cold-spot temperature, and buffer gas fill pressure. If fill pressure is not known, a default value dependent on lamp radius is used. The model shows good agreement over a wide range of operating frequencies and lamp powers
Consti–Tortion: Tort Law as an End-Run Around Abortion Rights After Planned Parenthood v. Casey
Integrated regional-economic modeling of costeffective programs of measures in the WFD: Development of a demonstration tool
Control strategies for integration of electric motor assist and functional electrical stimulation in paraplegic cycling: Utility for exercise testing and mobile cycling
AIM: The aim of this study was to investigate feedback
control strategies for integration of electric motor assist and functional electrical stimulation (FES) for paraplegic cycling, with particular focus on development of a testbed for exercise testing in FES cycling, in which both cycling cadence and workrate are simultaneously well controlled and contemporary physiological measures of exercise performance derived. A second aim was
to investigate the possible benefits of the approach for mobile, recreational cycling.
METHODS: A recumbent tricycle with an auxiliary electric motor is used, which is adapted for paraplegic users, and instrumented for stimulation control. We propose a novel integrated control strategy which simultaneously provides feedback control of leg power output (via automatic adjustment of stimulation intensity) and cycling cadence (via electric motor control). Both loops are
designed using system identification and analytical (model-based) feedback design methods. Ventilatory and pulmonary gas exchange response profiles are derived using a portable system for real-time breath-by-breath acquisition.
RESULTS:We provide indicative results from one paraplegic subject in which a series of feedback-control tests illustrate accurate control of cycling cadence, leg power control, and external disturbance rejection. We also provide physiological response profiles from a submaximal exercise step test and a maximal incremental exercise test, as facilitated by the control strategy.
CONCLUSION: The integrated control strategy is effective in facilitating
exercise testing under conditions of well-controlled cadence
and power output. Our control approach significantly extends the
achievable workrate range and enhances exercise-test sensitivity
for FES cycling, thus allowing a more stringent characterization
of physiological response profiles and estimation of key parameters
of aerobic function.We further conclude that the control approach
can significantly improve the overall performance of mobile recreational
cycling
Design, characterisation and properties of Mo-Ti-Fe alloys reinforced by ordered intermetallic precipitates
Reinforcement of solid solution matrices with ordered intermetallic precipitates is known to be an effective strategy for obtaining high strength, damage tolerant alloys and has been central to the success of nickel based superalloys. This strategy has also been exploited in a number of bcc-based systems, for example in maraging steels where ferrite is strengthened by L21 (Heusler) and/or B2 structured intermetallic precipitates. However, only limited studies have explored the possibility of extending this approach to bcc alloys based on refractory metals and titanium.
Recent research has shown that titanium-iron alloys comprising eutectic A2 Ti and B2 TiFe phases may be produced with strengths of over 2.5 GPa, alongside elongations to failures of ~15%. These impressive properties are thought to be a result of a fine microstructural length scale and a high lattice misfit between the phases. Here, we report on the phase equilibria in the Mo-Ti-Fe ternary system. In this system, an extensive two-phase field was identified between B2 TiFe intermetallic phase and the A2 (Ti, Mo) solid solution, that extended to Mo rich compositions. Knowledge of how this phase equilibrium varies with temperature enabled the design of alloys that could be homogenised in the single-phase solid solution and subsequently reinforced by solid state precipitates following a lower temperature heat treatment. The microstructure obtained was finer than has been produced through an invariant reaction and an initial assessment of their mechanical properties revealed substantial strength. The prospects for modifying these alloys to enable their use at higher temperatures will be discussed.
This work was supported through the Rolls-Royce/EPSRC Strategic Partnership under EP/H022309/1 and EP/H500375/1, as well as the DARE project under EP/L025213/1
Reducing dietary wild derived fishmeal inclusion levels in production diets for large yellowtail kingfish (Seriola lalandi)
Further research to understand the effect of dietary wild derived fishmeal (WD-FM) substitution with commercially relevant alternative ingredients for large yellowtail kingfish (Seriola lalandi; YTK) was investigated. This 36-week study was designed to replace dietary inclusions of WD-FM with alternative protein ingredients including poultry meal, soy protein concentrate and by-product fishmeal (PM, SPC and BP-FM) and measure the effect on the growth performance, feed utilisation, and health of large YTK (2.5 kg initial weight) at ambient water temperatures (average 16.6 °C). Six diets were formulated on a digestible basis to contain 39% digestible protein (∼45–46% crude protein), 23% digestible lipid (∼24–25% crude lipid), and a digestible energy level of 17 MJ kg−1 (∼19 MJ kg−1 gross energy level). Fish were fed to apparent satiation once daily at 10:00 h. Substitution of fish meal with alternative ingredients did not significantly impact fish growth, feed utilisation, gastrointestinal health, blood haematology or measured biochemistry indices. Results from the current study will allow reductions to the dietary WD-FM inclusion levels, with tangible sustainability benefits. The inclusion of the alternative protein sources resulted in improvements in the fish in-fish out ratios of up to 35.1%. This study suggests formulation criteria for large YTK should include a minimum of 10% WD-FM. Further to this, at least 30% of the diet should consist of a combination of poultry meal, soy protein concentrate and fishmeal (both wild and by-product). Our data further support the use of BP-FM up to ∼20% inclusion, while PM and SPC should be limited to ∼10% inclusion until further data is available on these raw materials in YTK feeds. These recommendations will facilitate formulation flexibility for large YTK feeds, enabling formulators to adapt to changes to extrinsic factors such as raw material availability, and sustainability while minimising cost and performance impacts
Genetic differentiation in Scottish populations of the pine beauty moth Panolis flammea (Lepidoptera: Noctuidae)
Pine beauty moth, Panolis flammea (Denis & Schiffermüller), is a recent but persistent pest of lodgepole pine plantations in Scotland, but exists naturally at low levels within remnants and plantations of Scots pine. To test whether separate host races occur in lodgepole and Scots pine stands and to examine colonization dynamics, allozyme, randomly amplified polymorphic DNA (RAPD) and mitochondrial variation were screened within a range of Scottish samples. RAPD analysis indicated limited long distance dispersal (FST = 0.099), and significant isolation by distance (P < 0.05); but that colonization between more proximate populations was often variable, from extensive to limited exchange. When compared with material from Germany, Scottish samples were found to be more diverse and significantly differentiated for all markers. For mtDNA, two highly divergent groups of haplotypes were evident, one group contained both German and Scottish samples and the other was predominantly Scottish. No genetic differentiation was evident between P. flammea populations sampled from different hosts, and no diversity bottleneck was observed in the lodgepole group. Indeed, lodgepole stands appear to have been colonized on multiple occasions from Scots pine sources and neighbouring populations on different hosts are close to panmixia.A.J. Lowe, B.J. Hicks, K. Worley, R.A. Ennos, J.D. Morman, G. Stone and A.D. Wat
Battery energy storage systems for the electricity grid: UK research facilities
Grid-connected battery energy storage systems with fast
acting control are a key technology for improving power
network stability and increasing the penetration of renewable
generation. This paper describes two battery energy storage
research facilities connected to the UK electricity grid. Their
performance is detailed, along with hardware results, and a
number of grid support services are demonstrated, again with
results presented. The facility operated by The University of
Manchester is rated at 236kVA, 180kWh, and connected to
the 400V campus power network, The University of Sheffield
operates a 2MVA, 1MWh facility connected to an 11kV
distribution network
Asymptotic expansions for renewal measures in the plane
Let P be a distribution in the plane and define the renewal measure R=ΣP *n where * denotes convolution. The main results of this paper are three term asymptotic expansions for R far from the origin. As an application, expansions are obtained for distributions in linear boundary crossing problems.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/47655/1/440_2004_Article_BF00348749.pd
- …