31,814 research outputs found
Amplifier enhances ring-down spectroscopy
In recent years, investigators have adapted the principles of ringdown spectroscopy (see sidebar, facing page) to fiber optic configurations by placing high reflectors on each end of a fiber and observing the ringdown time of an injected pulse. But a major drawback is the difficulty of creating a low-loss, high-Q resonator in an optical fiber
A Compilation of the Property Differences of Ortho and Para Hydrogen or Mixtures of Ortho and Para Hydrogen
Chemical and physical properties of ortho and para hydrogen or mixtures of ortho and para hydroge
Near infrared spectroscopy for fibre based gas detection
Gas sensing systems based on fibre optic linked near infra red absorption cells are potentially a flexible and effective tool for monitoring accumulations of hazardous and noxious gases in enclosed areas such as tunnels and mines. Additionally the same baseline technology is readily modified to measure concentrations of hydrocarbon fuels - notably but not exclusively methane, and monitoring emissions of greenhouse gases. Furthermore the system can be readily implemented to provide intrinsically safe monitoring over extensive areas at up to ~250 points from a single interrogation unit. In this paper we review our work on fibre coupled gas sensing systems. We outline the basic principles through which repeatable and accurate self calibrating gas measurements may be realised, including the recover of detailed line shapes for non contact temperature and / or pressure measurements in addition to concentration assessments in harsh environments. We also outline our experience in using these systems in extensive networks operating under inhospitable conditions over extended periods extending to several years
Experimental measurements of the ground cloud growth during the 11 February 1974, Titan-Centaur launch at Kennedy Space Center
The Titan-Centaur was launched from Kennedy Space Center on February 11, 1974 at 0948 eastern daylight time. Ground level effluent measurements were obtained from the solid rocket motors for comparison with NASA diffusion models for predicting effluent ground level concentrations and cloud behavior. The results obtained provide a basis for an evaluation of such key model inputs such as cloud rise rate, stabilization altitude, crosswind growth, volume expansion, and cloud trajectory. Ground level effluent measurements were limited because of changing meteorological conditions, incorrect instrument location, and operational problems. Based on the measurement results, operational changes are defined. Photographs of the ground exhaust clouds are shown. The chemical composition of the exhaust gases was analyzed and is given
Relationship between resistivity and specific heat in a canonical non-magnetic heavy fermion alloy system: UPt_5-xAu_x
UPt_(5-x)Au_x alloys form in a single crystal structure, cubic AuBe_5-type,
over a wide range of concentrations from x = 0 to at least x = 2.5. All
investigated alloys, with an exception for x = 2.5, were non-magnetic. Their
electronic specific heat coefficient varies from about 60 (x = 2) to
about 700 mJ/mol K^2 (x = 1). The electrical resistivity for all alloys has a
Fermi-liquid-like temperature variation, \rho = \rho_o + AT^2, in the limit of
T -> 0 K. The coefficient A is strongly enhanced in the heavy-fermion regime in
comparison with normal and transition metals. It changes from about 0.01 (x =
0) to over 2 micro-ohm cm/K^2 (x = 1). A/\gamma^2, which has been postulated to
have a universal value for heavy-fermions, varies from about 10^-6 (x = 0, 0.5)
to 10^-5 micro-ohm cm (mol K/mJ)^2 (x > 1.1), thus from a value typical of
transition metals to that found for some other heavy-fermion metals. This ratio
is unaffected, or only weakly affected, by chemical or crystallographic
disorder. It correlates with the paramagnetic Curie-Weiss temperature of the
high temperature magnetic susceptibility.Comment: 5 pages, 5 eps figures, RevTe
SCATS: SRB Cost Accounting and Tracking System handbook
The Solid Rocket Booster Cost Accounting and Tracking System (SCATS) which is an automatic data processing system designed to keep a running account of the number, description, and estimated cost of Level 2, 3, and 4 changes is described. Although designed specifically for the Space Shuttle Solid Rocket Booster Program, the ADP system can be used for any other program that has a similar structure for recording, reporting, and summing numbers and costs of changes. The program stores the alpha-numeric designators for changes, government estimated costs, proposed costs, and negotiated value in a MIRADS (Marshall Information Retrieval and Display System) format which permits rapid access, manipulation, and reporting of current change status. Output reports listing all changes, totals of each level, and totals of all levels, can be derived for any calendar interval period
Data management of nanometre scale CMOS device simulations
In this paper we discuss the problems arising in managing and curating the data generated by simulations of nanometre scale CMOS (Complementary Metal–Oxide Semiconductor) transistors, circuits and systems and describe the software and operational techniques we have adopted to address them. Such simulations pose a number of challenges including, inter alia, multiTByte data volumes, complex datasets with complex inter-relations between datasets, multi-institutional collaborations including multiple specialisms and a mixture of academic and industrial partners, and demanding security requirements driven by commercial imperatives. This work was undertaken as part of the NanoCMOS project. However, the problems, solutions and experience seem likely to be of wider relevance, both within the CMOS design community and more generally in other disciplines
- …