28,746 research outputs found
Guided growth: 1933 to the present
While osteotomies are necessary for rotational correction and limb lengthening, angular correction or moderate length inhibition may be achieved by other, less invasive means. Several techniques of epiphysiodesis have evolved, enabling gradual correction of angular correction and/or length equalisation through guided growth. This manuscript comprises a historical and comparative review of those techniques. The 8-plate method of guided growth affords the opportunity to provide a tension band (rather than compression) that expedites angular correction, compared to stapling or transphyseal screws, which rely upon the principle of compression. When applied to each side of a given physis, longitudinal growth is inhibited, in the same fashion as stapling or epiphysiodesis. The physis and periosteum are spared any direct insult, thus making this a reversible process, suitable for use in younger children. The 8-plate is simple to insert and, compared to staples or transphyseal screws, easy to remove
Modeling urban street patterns
Urban streets patterns form planar networks whose empirical properties cannot
be accounted for by simple models such as regular grids or Voronoi
tesselations. Striking statistical regularities across different cities have
been recently empirically found, suggesting that a general and
details-independent mechanism may be in action. We propose a simple model based
on a local optimization process combined with ideas previously proposed in
studies of leaf pattern formation. The statistical properties of this model are
in good agreement with the observed empirical patterns. Our results thus
suggests that in the absence of a global design strategy, the evolution of many
different transportation networks indeed follow a simple universal mechanism.Comment: 4 pages, 5 figures, final version published in PR
Plasma interactions and surface/material effects
A discussion on plasma interactions and surface/material effects is summarized. The key issues in this area were: (1) the lack of data on the material properties of common spacecraft surface materials; (2) lack of understanding of the contamination and decontamination processes; and (3) insufficient analytical tools to model synergistic phenomena related to plasma interactions. Without an adequate database of material properties, accurate system performance predictions cannot be made. The interdisciplinary nature of the surface-plasma interactions area makes it difficult to plan and maintain a coherent theoretical and experimental program. The shuttle glow phenomenon is an excellent example of an unanticipated, complex interaction involving synergism between surface and plasma effects. Building an adequate technology base for understanding and predicting surface-plasma interactions will require the coordinated efforts of engineers, chemists, and physicists. An interdisciplinary R and D program should be organized to deal with similar problems that the space systems of the 21st century may encounter
Optimal Prandtl number for heat transfer in rotating Rayleigh-Benard convection
Numerical data for the heat transfer as a function of the Prandtl (Pr) and
Rossby (Ro) numbers in turbulent rotating Rayleigh-Benard convection are
presented for Rayleigh number Ra = 10^8. When Ro is fixed the heat transfer
enhancement with respect to the non-rotating value shows a maximum as function
of Pr. This maximum is due to the reduced efficiency of Ekman pumping when Pr
becomes too small or too large. When Pr becomes small, i.e. for large thermal
diffusivity, the heat that is carried by the vertical vortices spreads out in
the middle of the cell, and Ekman pumping thus becomes less efficient. For
higher Pr the thermal boundary layers (BLs) are thinner than the kinetic BLs
and therefore the Ekman vortices do not reach the thermal BL. This means that
the fluid that is sucked into the vertical vortices is colder than for lower Pr
which limits the efficiency of the upwards heat transfer.Comment: 5 pages, 6 figure
The enviornmental assessment of a contemporary coal mining system
A contemporary underground coal mine in eastern Kentucky was assessed in order to determine potential off-site and on-site environmental impacts associated with the mining system in the given environmental setting. A 4 section, continuous room and pillor mine plan was developed for an appropriate site in eastern Kentucky. Potential environmental impacts were identified, and mitigation costs determined. The major potential environmental impacts were determined to be: acid water drainage from the mine and refuse site, uneven subsidence of the surface as a result of mining activity, and alteration of ground water aquifers in the subsidence zone. In the specific case examined, the costs of environmental impact mitigation to levels prescribed by regulations would not exceed $1/ton of coal mined, and post mining land values would not be affected
Coupled wake boundary layer model of wind-farms
We present and test the coupled wake boundary layer (CWBL) model that
describes the distribution of the power output in a wind-farm. The model
couples the traditional, industry-standard wake model approach with a
"top-down" model for the overall wind-farm boundary layer structure. This wake
model captures the effect of turbine positioning, while the "top-down" portion
of the model adds the interactions between the wind-turbine wakes and the
atmospheric boundary layer. Each portion of the model requires specification of
a parameter that is not known a-priori. For the wake model, the wake expansion
coefficient is required, while the "top-down" model requires an effective
spanwise turbine spacing within which the model's momentum balance is relevant.
The wake expansion coefficient is obtained by matching the predicted mean
velocity at the turbine from both approaches, while the effective spanwise
turbine spacing depends on turbine positioning and thus can be determined from
the wake model. Coupling of the constitutive components of the CWBL model is
achieved by iterating these parameters until convergence is reached. We
illustrate the performance of the model by applying it to both developing
wind-farms including entrance effects and to fully developed (deep-array)
conditions. Comparisons of the CWBL model predictions with results from a suite
of large eddy simulations (LES) shows that the model closely represents the
results obtained in these high-fidelity numerical simulations. A comparison
with measured power degradation at the Horns Rev and Nysted wind-farms shows
that the model can also be successfully applied to real wind-farms.Comment: 25 pages, 21 figures, submitted to Journal of Renewable and
Sustainable Energy on July 18, 201
Reflections on a coaching pilot project in healthcare settings
This paper draws on personal reflection of coaching experiences and learning as a coach to consider the relevance of these approaches in a management context with a group of four healthcare staff who participated in a pilot coaching project. It explores their understanding of coaching techniques applied in management settings via their reflections on using coaching approaches and coaching applications as healthcare managers. Coaching approaches can enhance a manager’s skill portfolio and offer the potential benefits in terms of successful goal achievement, growth, mutual learning and development for both themselves and staff they work with in task focused scenarios
- …