674 research outputs found
Interaction of Sodium, Sulfur, and Silica during Coal Combustion
The Interaction of Sodium, Sulfur, and Silica at Conditions Typical in a Pulverized Coal Furnace Was Investigated by using Both Model Mixtures and a Synthetic Coal. the Model Mixtures Consisted of Selected Inorganic Constituents that Were Well Mixed in Proportions Typically Found in Low-Rank Coal. the Synthetic Coal Consisted of a Furfuryl Alcohol Polymer with Appropriate Amounts of Sodium, Sulfur, and Silica to Duplicate the Characteristics of Low-Rank Coal. the Model Mixtures and Synthetic Coal Were Burned in a Laminar Flow (Drop-Tube) Furnace at 900, 1100, 1300, and 1500 °C and Residence Times of 0.1,0.5,1.5, and 2.4 S. the Resulting Char and Fly Ash Particles Were Quickly Quenched, Collected, and Analyzed with a Scanning Electron Microscope (SEM) to Determine Size and Composition. Results Indicated that the Formation of Sodium Silicates is Favored by Higher Temperatures and Longer Residence Times. Thermodynamic Calculations and the Model Mixture Studies Indicated above 1100 °C There is Little Interference in the Formation of Sodium Silicates by Sodium Sulfates. in the Synthetic Coal Studies, Sodium Sulfate Particles Were Detected on the Surface of the Larger Sodium Silicate Fly Ash Particles Formed at Lower Temperatures. the Size and Prevalence of the Sodium Sulfate Particles Decreased as Temperature Was Increased. Fly Ash Particle Formation Was Characterized by Fragmentation Followed by Coalescence. Fragmentation Was More Prevalent at Higher Temperatures and Smaller Fly Ash Particles Were Formed. Larger Particles Were Formed at Lower Temperatures, Indicating More Complete Coalescence with Some Cenosphere Formation. © 1991, American Chemical Society. All Rights Reserved
Leaching Behavior of Rare Earth Elements in Fort Union Lignite Coals of North America
Fort Union lignite coal samples were subjected to a series of aqueous leaching experiments to understand the extraction behavior of the rare earth elements (REE). This testing was aimed at understanding the modes of occurrence of the REE in the lignite coals, as well as to provide foundational data for development of rare earth extraction processes. In a first series of tests, a sequential leaching process was used to investigate modes of occurrence of the REE of select lignite coals. The tests involved sequential exposure to solvents consisting of water, ammonium acetate and dilute hydrochloric acid (HCl). The results indicated that water and ammonium acetate extracted very little of the REE, indicating the REE are not present as water soluble or ion-exchangeable forms. However, the data shows that a large percentage of the REE were extracted with the hydrochloric acid (80-95wt%), suggesting presence in HCl-soluble mineral forms such as carbonates, and/or presence as organic complexes. A second series of tests was performed involving single-step leaching with dilute acids and various operating parameters, including acid type, acid concentration, acid/coal contact time and coal particle size. For select samples, additional tests were performed to understand the results of leaching, including float-sink density separations and humic acid extraction. The results have shown that the majority of REE in Fort Union lignites appear to be associated weakly with the organic matrix of the coals, most likely as coordination complexes of carboxylic acid groups. The light REE and heavy REE exhibit different behaviors, however. The extractable light REE appear to have association both in acid-soluble mineral forms and as organic complexes, whereas the extractable heavy REE appear to be almost solely associated with the organics. Scandium behavior was notably different than yttrium and the lanthanides, and the data suggests the extractable content is primarily associated as acid-soluble mineral forms
Recommended from our members
Mercury Emission Control Technologies for PPL Montana-Colstrip Testing
The Energy & Environmental Research Center (EERC) was asked by PPL Montana LLC (PPL) to provide assistance and develop an approach to identify cost-effective options for mercury control at its coal-fired power plants. The work conducted focused on baseline mercury level and speciation measurement, short-term parametric testing, and week long testing of mercury control technology at Colstrip Unit 3. Three techniques and various combinations of these techniques were identified as viable options for mercury control. The options included oxidizing agents or sorbent enhancement additives (SEAs) such as chlorine-based SEA1 and an EERC proprietary SEA2 with and without activated carbon injection. Baseline mercury emissions from Colstrip Unit 3 are comparatively low relative to other Powder River Basin (PRB) coal-fired systems and were found to range from 5 to 6.5 g/Nm3 (2.9 to 3.8 lb/TBtu), with a rough value of approximately 80% being elemental upstream of the scrubber and higher than 95% being elemental at the outlet. Levels in the stack were also greater than 95% elemental. Baseline mercury removal across the scrubber is fairly variable but generally tends to be about 5% to 10%. Parametric results of carbon injection alone yielded minimal reduction in Hg emissions. SEA1 injection resulted in 20% additional reduction over baseline with the maximum rate of 400 ppm (3 gal/min). Week long testing was conducted with the combination of SEA2 and carbon, with injection rates of 75 ppm (10.3 lb/hr) and 1.5 lb/MMacf (40 lb/hr), respectively. Reduction was found to be an additional 30% and, overall during the testing period, was measured to be 38% across the scrubber. The novel additive injection method, known as novel SEA2, is several orders of magnitude safer and less expensive than current SEA2 injection methods. However, used in conjunction with this plant configuration, the technology did not demonstrate a significant level of mercury reduction. Near-future use of this technique at Colstrip is not seen. All the additives injected resulted in some reduction in mercury emissions. However, the target reduction of 55% was not achieved. The primary reason for the lower removal rates is because of the lower levels of mercury in the flue gas stream and the lower capture level of fine particles by the scrubbers (relative to that for larger particles). The reaction and interaction of the SEA materials is with the finer fraction of the fly ash, because the SEA materials are vaporized during the combustion or reaction process and condense on the surfaces of entrained particles or form very small particles. Mercury will have a tendency to react and interact with the finer fraction of entrained ash and sorbent as a result of the higher surface areas of the finer particles. The ability to capture the finer fraction of fly ash is the key to controlling mercury. Cost estimates for mercury removal based on the performance of each sorbent during this project are projected to be extremely high. When viewed on a dollar-per-pound-of-mercury removed basis activated carbon was projected to cost nearly 200,000 per pound of mercury removed
Recommended from our members
Mapping individual brains to guide restorative therapy after stroke: rationale and pilot studies.
Some treatments under development to improve motor outcome after stroke require information about organization of individual subject's brain. The current study aimed to characterize normal inter-subject differences in localization of motor functions, and to consider these findings in relation to a potential treatment of motor deficits after stroke. Functional MRI (fMRI) scanning in 14 subjects examined right index finger tapping, shoulder rotation, or facial movement. The largest activation cluster in left sensorimotor cortex was identified for each task, and its center expressed in Talairach stereotaxic coordinates. Across subjects, each task showed considerable variability in activation site coordinates. For example, during finger tapping, the range for center of activation was 7 mm in the x-axis, 19 mm in the y-axis, and 11 mm in the z-axis. The mean value for center of activation was significantly different for all three coordinates for all pairwise task comparisons. However, the distribution of activation site centers for the finger task overlapped with the other two tasks in the x- and y-axes, and with the shoulder task in the z-axis. On average, the center of activation for the three motor tasks were spatially separated and somatotopically distributed. However, across the population, there was considerable overlap in the center of activation site, especially for finger and shoulder movements. Restorative therapies that aim to target specific body segments, such as the hand, in the post-stroke motor system may need to map the individual brain rather than rely on population averages. Initial details are presented of a study using this approach to evaluate such a therapy
Molecular Characterization of Host-Specific Biofilm Formation in a Vertebrate Gut Symbiont
Although vertebrates harbor bacterial communities in their gastrointestinal tract whose composition is host-specific, little is known about the mechanisms by which bacterial lineages become selected. The goal of this study was to characterize the ecological processes that mediate host-specificity of the vertebrate gut symbiont Lactobacillus reuteri, and to systematically identify the bacterial factors that are involved. Experiments with monoassociated mice revealed that the ability of L. reuteri to form epithelial biofilms in the mouse forestomach is strictly dependent on the strain’s host origin. To unravel the molecular basis for this host-specific biofilm formation, we applied a combination of transcriptome analysis and comparative genomics and identified eleven genes of L. reuteri 100-23 that were predicted to play a role. We then determined expression and importance of these genes during in vivo biofilm formation in monoassociated mice. This analysis revealed that six of the genes were upregulated in vivo, and that genes encoding for proteins involved in epithelial adherence, specialized protein transport, cell aggregation, environmental sensing, and cell lysis contributed to biofilm formation. Inactivation of a serine-rich surface adhesin with a devoted transport system (the SecA2-SecY2 pathway) completely abrogated biofilm formation, indicating that initial adhesion represented the most significant step in biofilm formation, likely conferring host specificity. In summary, this study established that the epithelial selection of bacterial symbionts in the vertebrate gut can be both specific and highly efficient, resulting in biofilms that are exclusively formed by the coevolved strains, and it allowed insight into the bacterial effectors of this process
Recommended from our members
Use of functional MRI to guide decisions in a clinical stroke trial.
Background and purposeAn investigational trial examined safety and efficacy of targeted subthreshold cortical stimulation in patients with chronic stroke. The anatomical location for the target, hand motor area, varies across subjects, and so was localized with functional MRI (fMRI). This report describes the experience of incorporating standardized fMRI into a multisite stroke trial.MethodsAt 3 enrollment centers, patients moved (0.25 Hz) the affected hand during fMRI. Hand motor function was localized at a fourth center guiding intervention for those randomized to stimulation.ResultsThe fMRI results were available within 24 hours. Across 12 patients, activation site variability was substantial (12, 23, and 11 mm in x, y, and z directions), exceeding stimulating electrode dimensions.ConclusionsUse of fMRI to guide decision-making in a clinical stroke trial is feasible
Extra-Zodiacal-Cloud Astronomy via Solar Electric Propulsion
Solar electric propulsion (SEP) is often considered as primary propulsion for robotic planetary missions, providing the opportunity to deliver more payload mass to difficult, high-delta-velocity destinations. However, SEP application to astrophysics has not been well studied. This research identifies and assesses a new application of SEP as primary propulsion for low-cost high-performance robotic astrophysics missions. The performance of an optical/infrared space observatory in Earth orbit or at the Sun-Earth L2 point (SEL2) is limited by background emission from the Zodiacal dust cloud that has a disk morphology along the ecliptic plane. By delivering an observatory to a inclined heliocentric orbit, most of this background emission can be avoided, resulting in a very substantial increase in science performance. This advantage enabled by SEP allows a small-aperture telescope to rival the performance of much larger telescopes located at SEL2. In this paper, we describe a novel mission architecture in which SEP technology is used to enable unprecedented telescope sensitivity performance per unit collecting area. This extra-zodiacal mission architecture will enable a new class of high-performance, short-development time, Explorer missions whose sensitivity and survey speed can rival flagship-class SEL2 facilities, thus providing new programmatic flexibility for NASA's astronomy mission portfolio. A mission concept study was conducted to evaluate this application of SEP. Trajectory analyses determined that a 700 kg-class science payload could be delivered in just over 2 years to a 2 AU mission orbit inclined 15 to the ecliptic using a 13 kW-class NASA's Evolutionary Xenon Thruster (NEXT) SEP system. A mission architecture trade resulted in a SEP stage architecture, in which the science spacecraft separates from the stage after delivery to the mission orbit. The SEP stage and science spacecraft concepts were defined in collaborative engineering environment studies. The SEP stage architecture approach offers benefits beyond a single astrophysics mission. A variety of low-cost astrophysics missions could employ a standard SEP stage to achieve substantial science benefit. This paper describes the results of this study in detail, including trajectory analysis, spacecraft concept definition, description of telescope/instrument benefits, and application of the resulting SEP stage to other missions. In addition, the benefits of cooperative development and use of the SEP stage, in conjunction with a SEP flight demonstration mission currently in definition at NASA, are considered
Breakthrough Capability for UVOIR Space Astronomy: Reaching the Darkest Sky
We describe how availability of new solar electric propulsion (SEP) technology can substantially increase the science capability of space astronomy missions working within the near-UV to far-infrared (UVOIR) spectrum by making dark sky orbits accessible for the first time. We present two case studies in which SEP is used to enable a 700 kg Explorer-class and 7000 kg flagship-class observatory payload to reach an orbit beyond where the zodiacal dust limits observatory sensitivity. The resulting scientific performance advantage relative to a Sun-Earth L2 point (SEL2) orbit is presented and discussed. We find that making SEP available to astrophysics Explorers can enable this small payload program to rival the science performance of much larger long development-time systems. Similarly, we find that astrophysics utilization of high power SEP being developed for the Asteroid Redirect Robotics Mission (ARRM) can have a substantial impact on the sensitivity performance of heavier flagship-class astrophysics payloads such as the UVOIR successor to the James Webb Space Telescope
Breakthrough Capability for UVOIR Space Astronomy: Reaching the Darkest Sky
We describe how availability of new solar electric propulsion (SEP) technology can substantially increase the science capability of space astronomy missions working within the near-UV to far-infrared (UVOIR) spectrum by making dark sky orbits accessible for the first time. We present a proof of concept case study in which SEP is used to enable a 700 kg Explorer-class observatory payload to reach an orbit beyond where the zodiacal dust limits observatory sensitivity. The resulting scientific performance advantage relative to a Sun-Earth L2 point orbit is presented and discussed. We find that making SEP available to astrophysics Explorers can enable this small payload program to rival the science performance of much larger long development-time systems. We also present flight dynamics analysis which illustrates that this concept can be extended beyond Explorers to substantially improve the sensitivity performance of heavier (7000 kg) flagship-class astrophysics payloads such as the UVOIR successor to the James Webb Space Telescope by using high power SEP that is being developed for the Asteroid Redirect Robotics Mission
- …