Tuning crystalline ordering by annealing and additives to study its effect on exciton diffusion in a polyalkylthiophene copolymer

M.C, M.T.S, A.R and I.D.W.S acknowledge support from the European Research Council (EXCITON grant 321305). I.D.W.S acknowledges Royal Society Wolfson Research Merit Award. Use of the Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, is supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Contract No. DE-AC02-76SF00515The influence of various processing conditions on the singlet exciton diffusion is explored in films of a conjugated random copolymer poly-(3-hexylthiophene-co-3-dodecylthiophene) (P3HT-co-P3DDT) and correlated with the degree of crystallinity probed by grazing incidence X-ray scattering and with exciton bandwidth determined from absorption spectra. The exciton diffusion coefficient is deduced from exciton-exciton annihilation measurements and is found to increase by more than a factor of three when thin films are annealed using CS2 solvent vapour. A doubling of exciton diffusion coefficient is observed upon melt annealing at 200 °C and the corresponding films show about 50% enhancement in the degree of crystallinity. In contrast, films fabricated from polymer solutions containing a small amount of either solvent additive or nucleating agent show a decrease in exciton diffusion coefficient possibly due to formation of traps for excitons. Our results suggest that the enhancement of exciton diffusivity occurs because of increased crystallinity of alkyl-stacking and longer conjugation of aggregated chains which reduces the exciton bandwidth.Publisher PDFPeer reviewe

Electrical control of uniformity in quantum dot devices

Highly uniform quantum systems are essential for the practical implementation of scalable quantum processors. While quantum dot spin qubits based on semiconductor technology are a promising platform for large-scale quantum computing, their small size makes them particularly sensitive to their local environment. Here, we present a method to electrically obtain a high degree of uniformity in the intrinsic potential landscape using hysteretic shifts of the gate voltage characteristics. We demonstrate the tuning of pinch-off voltages in quantum dot devices over hundreds of millivolts that then remain stable at least for hours. Applying our method, we homogenize the pinch-off voltages of the plunger gates in a linear array for four quantum dots reducing the spread in pinch-off voltage by one order of magnitude. This work provides a new tool for the tuning of quantum dot devices and offers new perspectives for the implementation of scalable spin qubit arrays

Morphological, chemical, and electronic changes of the conjugated polymer PTB7 with thermal annealing

This work was supported by the Office of Naval Research NDSEG fellowship (V.S.) and the Department of Energy SCGSR Program (L.J.P.). Work was partially supported by the Department of the Navy, Office of Naval Research Award No. N00014-14-1-0580 (S.D.O., M.F.T.). L.K.J., I.R., and I.D.W.S. were supported by the Engineering and Physical Sciences Research Council (grants EP/L017008/1 and EP/L012294/1 ). I.D.W.S. also acknowledges support from a Royal Society Wolfson Research Merit Award. Use of the Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, is supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Contract No. DE-AC02-76SF00515.There is considerable interest in improving the performance of organic optoelectronic devices through processing techniques. Here, we study the effect of high-temperature annealing on the properties of the semiconducting polymer PTB7 and PTB7:fullerene blends, of interest as efficient organic photovoltaic (OPV) devices. Annealing to moderate temperature improves the PTB7 morphology and optoelectronic properties. High-temperature annealing also improves morphology but results in poorer optoelectronic properties. This is a result of side chain cleavage that creates by-products that act as trap states, increasing electronic disorder and decreasing mobility. We further observe changes to the PTB7 chemical structure after thermal cleavage that are similar to those following solar irradiation. This implies that side chain cleavage is an important mechanism in device photodegradation, which is a major ?burn-in? loss mechanism in OPV. These results lend insight into side chain cleavage as a method of improving optoelectronic properties and suggest strategies for improvement in device photostability.Publisher PDFPeer reviewe

Estimating the Capacity for ART Provision in Tanzania with the Use of Data on Staff Productivity and Patient Losses

BACKGROUND: International targets for access to antiretroviral therapy (ART) have over-estimated the capacity of health systems in low-income countries in Sub-Saharan Africa. The WHO target for number on treatment by end 2005 for Tanzania was 10 times higher than actually achieved. The target of the national Care and Treatment Plan (CTP) was also not reached. We aimed at estimating the capacity for ART provision and created five scenarios for ART production given existing resource limitations. METHODS: A situation analysis including scrutiny of staff factors, such as available data on staff and patient factors including access to ART and patient losses, made us conclude that the lack of clinical staff is the main limiting factor for ART scale-up, assuming that sufficient drugs and supplies are provided by donors. We created a simple formula to estimate the number of patients on ART based on availability and productivity of clinical staff, time needed to initiate vs maintain a patient on ART and patient losses using five different scenarios with varying levels of these parameters. FINDINGS: Our scenario assuming medium productivity (40% higher than that observed in 2002) and medium loss of patients (20% in addition to 15% first-year mortality) coincides with the actual reported number of patients initiated on ART up to 2008, but is considerably below the national CTP target of 90% coverage for 2009, corresponding to 420,000 on ART and 710,000 life-years saved (LY's). Our analysis suggests that a coverage of 40% or 175,000 on treatment and 350,000 LY's saved is more achievable. CONCLUSION: A comparison of our scenario estimations and actual output 2006-2008 indicates that a simple user-friendly dynamic model can estimate the capacity for ART scale-up in resource-poor settings based on identification of a limiting staff factor and information on availability of this staff and patient losses. Thus, it is possible to set more achievable targets

Implementation of Novel Molecular Biomarkers for Non-small Cell Lung Cancer in the Netherlands:How to Deal With Increasing Complexity

The diagnostic landscape of non-small cell lung cancer (NSCLC) is changing rapidly with the availability of novel treatments. Despite high-level healthcare in the Netherlands, not all patients with NSCLC are tested with the currently relevant predictive tumor markers that are necessary for optimal decision-making for today's available targeted or immunotherapy. An expert workshop on the molecular diagnosis of NSCLC involving pulmonary oncologists, clinical chemists, pathologists, and clinical scientists in molecular pathology was held in the Netherlands on December 10, 2018. The aims of the workshop were to facilitate cross-disciplinary discussions regarding standards of practice, and address recent developments and associated challenges that impact future practice. This paper presents a summary of the discussions and consensus opinions of the workshop participants on the initial challenges of harmonization of the detection and clinical use of predictive markers of NSCLC. A key theme identified was the need for broader and active participation of all stakeholders involved in molecular diagnostic services for NSCLC, including healthcare professionals across all disciplines, the hospitals and clinics involved in service delivery, healthcare insurers, and industry groups involved in diagnostic and treatment innovations. Such collaboration is essential to integrate different technologies into molecular diagnostics practice, to increase nationwide patient access to novel technologies, and to ensure consensus-preferred biomarkers are tested

Implementation of Novel Molecular Biomarkers for Non-small Cell Lung Cancer in the Netherlands: How to Deal With Increasing Complexity

The diagnostic landscape of non-small cell lung cancer (NSCLC) is changing rapidly with the availability of novel treatments. Despite high-level healthcare in the Netherlands, not all patients with NSCLC are tested with the currently relevant predictive tumor markers that are necessary for optimal decision-making for today's available targeted or immunotherapy. An expert workshop on the molecular diagnosis of NSCLC involving pulmonary oncologists, clinical chemists, pathologists, and clinical scientists in molecular pathology was held in the Netherlands on December 10, 2018. The aims of the workshop were to facilitate cross-disciplinary discussions regarding standards of practice, and address recent developments and associated challenges that impact future practice. This paper presents a summary of the discussions and consensus opinions of the workshop participants on the initial challenges of harmonization of the detection and clinical use of predictive markers of NSCLC. A key theme identified was the need for broader and active participation of all stakeholders involved in molecular diagnostic services for NSCLC, including healthcare professionals across all disciplines, the hospitals and clinics involved in service delivery, healthcare insurers, and industry groups involved in diagnostic and treatment innovations. Such collaboration is essential to integrate different technologies into molecular diagnostics practice, to increase nationwide patient access to novel technologies, and to ensure consensus-preferred biomarkers are tested

Tuning crystalline ordering by annealing and additives to study its effect on exciton diffusion in a polyalkylthiophene copolymer

The influence of various processing conditions on the singlet exciton diffusion is explored in films of a conjugated random copolymer poly-(3-hexylthiophene-co-3-dodecylthiophene) (P3HT-co-P3DDT) and correlated with the degree of crystallinity probed by grazing incidence X-ray scattering and with exciton bandwidth determined from absorption spectra. The exciton diffusion coefficient is deduced from exciton–exciton annihilation measurements and is found to increase by more than a factor of three when thin films are annealed using CS2 solvent vapour. A doubling of exciton diffusion coefficient is observed upon melt annealing at 200 °C and the corresponding films show about 50% enhancement in the degree of crystallinity. In contrast, films fabricated from polymer solutions containing a small amount of either solvent additive or nucleating agent show a decrease in exciton diffusion coefficient possibly due to formation of traps for excitons. Our results suggest that the enhancement of exciton diffusivity occurs because of increased crystallinity of alkyl-stacking and longer conjugation of aggregated chains which reduces the exciton bandwidth

Data from: Coupled vertical double quantum dots at single-hole occupancy

<p>Figures and Data for the paper "<span>Coupled vertical double quantum dots at single-hole</span><br><span>occupancy</span>" by A. Ivlev and H. Tidjani et al.</p> <p>See Readme file for details on replotting the figures.</p&gt