9,626 research outputs found
Completion Report: Arkansas State Pesticides in Ground Water Monitoring Project Phase V: Vulnerable areas in Jackson, Monroe, Lawrence and Lonoke Counties
In 1996, sixty-seven water samples were drawn from 65 wells, including 62 new wells and 3 wells sampled previously . One Woodruff County well and two Pulaski County wells were resampled. Thirty-two samples were drawn from 30 wells in Monroe County (well #1 was sampled 3 times during this phase) . Ten wells in Jackson County, 12 wells in Lawrence County and 10 wells in Lonoke were also tested (Figures 1-5) . With the completion of Phase V, the number of wells tested has risen to 231 with a total of 258 samples analyzed . Initially, the wells were tested for 13 pesticides and ni~rate. Two more pesticides, aldicarb and carbofuran were added to the analyte list during Phase V. The analyte list is shown in Table 3 . All results from all the wells are listed in Appendix A. Quality control information for these data follow the results. The Phase V Quality Assurance Report is included in this document as Part II
Reflective-Functioning Manual Version 5 for Application to Adult Attachment Interviews
The term reflective function (RF) refers to the psychological processes underlying the capacity to mentalize, a concept which has been described in both the psychoanalytic (Fonagy, 1989; 1991) and cognitive psychology literatures (e.g. Morton & Frith, 1995). Reflective functioning or mentalization is the active expression of this psychological capacity intimately related to the representation of the self (Fonagy & Target, 1995; 996; Target & Fonagy, 1996). RF involves both a self-reflective and an interpersonal component that ideally provides the individual with a well-developed capacity to distinguish inner from outer reality, pretend from ârealâ modes of functioning, intra-personal mental and emotional processes from interpersonal communications. Because of the inherently interpersonal origins to how the reflective capacity develops and expresses itself, this manual refers to reflective functioning, and no longer of reflective-self functioning (see Fonagy, Steele, Moran, Steele, & Higgitt, 1991a), as the latter term is too easily reduced to self-reflection which is only part of what is intended by the concept
Development of neutron activation analysis procedures for the determination of oxygen in potassium final report, period ending 15 dec. 1964
Neutron activation analysis for determination of oxygen in potassiu
Relative performance of hardwood sawing machines
Only limited information has been available to hardwood sawmiller on the performance of their sawing machines. This study analyzes a large database of individual machine studies to provide detailed information on 6 machine types. These machine types were band headrig, circular headrig, band linebar resaw, vertical band splitter resaw, single arbor gang resaw and double arbor gang resaw. Kerf width and within-board, between-board and total sawing variation values are given with an analysis of their origin in individual machine characteristics. Feedworks and setworks type and sawblade thickness and type generally determined machine type performance
Level-Based Analysis of the Population-Based Incremental Learning Algorithm
The Population-Based Incremental Learning (PBIL) algorithm uses a convex
combination of the current model and the empirical model to construct the next
model, which is then sampled to generate offspring. The Univariate Marginal
Distribution Algorithm (UMDA) is a special case of the PBIL, where the current
model is ignored. Dang and Lehre (GECCO 2015) showed that UMDA can optimise
LeadingOnes efficiently. The question still remained open if the PBIL performs
equally well. Here, by applying the level-based theorem in addition to
Dvoretzky--Kiefer--Wolfowitz inequality, we show that the PBIL optimises
function LeadingOnes in expected time for a population size , which matches the bound
of the UMDA. Finally, we show that the result carries over to BinVal, giving
the fist runtime result for the PBIL on the BinVal problem.Comment: To appea
Ideal Bose gas in fractal dimensions and superfluid He in porous media
Physical properties of ideal Bose gas with the fractal dimensionality between
D=2 and D=3 are theoretically investigated. Calculation shows that the
characteristic features of the specific heat and the superfluid density of
ideal Bose gas in fractal dimensions are strikingly similar to those of
superfluid Helium-4 in porous media. This result indicates that the geometrical
factor is dominant over mutual interactions in determining physical properties
of Helium-4 in porous media.Comment: 13 pages, 6 figure
Toxic ferns of Western Australia
Botanical descriptions and notes on the distribution of six species of ferns are given. These plants contain the enzyme thiaminase, which may induce thiamin deficiency, or other constituents toxic to animals. The clinical signs of both thiamin deficiency and fern toxicity in affected livestock are described
Parallel pull flow: A new lean production design
This case study is #2 in a series of studies that relate specifically to the development and application of lean manufacturing techniques for the furniture and wood component supplying industries. Case study #2 is an example of how productivity can be increased in a furniture manufacturing organization by using a new lean production design termed Parallel Pull Flow (PPF). This case study provides information about lean manufacturing and how a lean manufacturing system can be implemented, followed by a detailed case study of a furniture manufacturing companyâs adoption of a new final assembly PPF lean production system
The Double-D cell for assembling hardware in upholstered furniture production
This is the first case study in a series of studies that relate specifically to the development and application of lean manufacturing techniques of furniture and wood component supplying industries. Case study one is an example of how a subassembly process in an upholstered furniture facility was re-configured from a traditional flow line to a âDouble-Dâ manufacturing cell. This case study provides general information about lean manufacturing and how a lean manufacturing system can be implemented, followed by a detailed description of Franklin Corporationâs adoption of a new type of manufacturing cellâthe âDouble-Dâ. A discussion of the original state of the subassembly system and the result of the Double-D modifications are also given
- âŠ