407 research outputs found
Solar walls for high-performance buildings
Passive solar design can reduce building energy demand for heating, cooling and ventilation, while also contributing to the comfort, well-being and productivity of the building’s occupants. The successful application of passive solar features, such as solar walls, requires a good understanding of the factors influencing their energy performance and a correct assessment of this performance during the design process. This paper discusses some basic design strategies for successful application of solar walls and the factors with the most significant impact on their efficiency. It summarizes the principle results and findings of an experimental study, based on dynamic simulations and test site measurements. The energy performance of various configurations of unvented solar walls was investigated in different climatic conditions. The outcomes of the dynamic simulations were used to develop a simplified quasisteady-state model, which can be used for approximate evaluation of the heat gains and heat losses through an unvented solar wall on a monthly basis. The model is compatible with the monthly method of EN ISO 13790.This work has been supported by The National Science Fund of Bulgaria under projects number ДУНК-01/3 (DUNK-01/3) and ДФНИ Е 02/17 (DFNI E 02/17)
Militant Extremist Mindset in Post-conflict Regions of the Balkans
This study explores the structure of Militant Extremist Mindset (MEM) within a sample of participants living in areas with enhanced risk of intergroup conflict. We were also interested in comparing members of three different ethnic groups (Serbs, Albanians, and Bosniaks) on MEM measures. A short version of the MEM scale was created for future use. We found that the factorial structure of MEM was replicated in the sample composed of people from both sides of a conflict. Ethnic groups did not differ significantly on the Grudge component of MEM. Group differences were pronounced on the Pro-violence and Utopianism factors. Albanians scored higher than Bosniaks and Serbs on these two dimensions. However, significant differences were obtained on the Ethos of Conflict (EOC) factor when groups of Serbs living within and outside areas of recent conflict were compared
Recommended from our members
Analysis of multiscale radiometric data collected during the Cold Land Processes Experiment-1 (CLPX-1)
Histograms of brightness temperatures collected at 18.7 and 37 GHz over the Fraser and North Park Meso-Scale Areas during the Cold Land Processes Experiment by the NOAA Polarimetric Scanning Radiometer (PSR/A) airborne sensor are modelled by a log-normal distribution (Fraser, forested area) and by a bi-modal distribution (North Park, patchy-snow, non-forested area). The brightness temperatures are re-sampled over a range of resolutions to study the effects of sensor resolution on the shape of the distribution, on the values of the average brightness temperatures and standard deviations. The histograms become more uniform and the spatial information in the initial distribution is lost for a resolution larger than 5000 m, in both areas. The values of brightness temperatures obtained by re-sampling the PSR-A data at 25 km resolution are consistent with those recorded by the Advanced Microwave Scanning Radiometer (AMSR-E) and Special Sensor Microwave/Imager (SSM/I) satellite radiometers at similar resolutions
Cryogenic heat exchangers for process cooling and renewable energy storage: A review
© 2019 The cryogenic industry has experienced remarkable expansion in recent years. Cryogenic technologies are commonly used for industrial processes, such as air separation and natural gas liquefaction. Another recently proposed and tested cryogenic application is Liquid Air Energy Storage (LAES). This technology allows for large-scale long-duration storage of renewable energy in the power grid. One major advantage over alternative storage techniques is the possibility of efficient integration with important industrial processes, e.g., refrigerated warehousing of food and pharmaceuticals. Heat exchangers are among the most important components determining the energy efficiency of cryogenic systems. They also constitute the necessary interface between a LAES system and the industrial process utilizing the available cooling effect. The present review aims to familiarise energy professionals and stakeholders with the latest achievements, innovations, and trends in the field of cryogenic heat exchangers, with particular emphasis on their applications to LAES systems employing renewable energy resources. Important innovations in coil-wound and plate-fin heat exchanger design and simulation methods are reviewed among others, while special attention is given to regenerators as a prospective component of cryogenic energy storage systems. This review also reveals that the geographical spread of research and development activities has recently expanded from well-established centers of excellence to rather active emerging establishments around the globe
Ab initio and nuclear inelastic scattering studies of FeSi/GaAs heterostructures
The structure and dynamical properties of the FeSi/GaAs(001) interface
are investigated by density functional theory and nuclear inelastic scattering
measurements. The stability of four different atomic configurations of the
FeSi/GaAs multilayers is analyzed by calculating the formation energies and
phonon dispersion curves. The differences in charge density, magnetization, and
electronic density of states between the configurations are examined. Our
calculations unveil that magnetic moments of the Fe atoms tend to align in a
plane parallel to the interface, along the [110] direction of the FeSi
crystallographic unit cell. In some configurations, the spin polarization of
interface layers is larger than that of bulk FeSi. The effect of the
interface on element-specific and layer-resolved phonon density of states is
discussed. The Fe-partial phonon density of states measured for the FeSi
layer thickness of three monolayers is compared with theoretical results
obtained for each interface atomic configuration. The best agreement is found
for one of the configurations with a mixed Fe-Si interface layer, which
reproduces the anomalous enhancement of the phonon density of states below 10
meVComment: 14 pages, 9 figures, 4 table
Origin of a Simultaneous Suppression of Thermal Conductivity and Increase of Electrical Conductivity and Seebeck Coefficient in Disordered Cubic Cu2ZnSnS4
The parameters governing the thermoelectric efficiency of a material, Seebeck coefficient, electrical, and thermal conductivities, are correlated and their reciprocal interdependence typically prevents a simultaneous optimization. Here, we present the case of disordered cubic kesterite CuZnSnS, a phase stabilized by structural disorder at low temperature. With respect to the ordered form, the introduction of disorder improves the three thermoelectric parameters at the same time. The origin of this peculiar behavior lies in the localization of some Sn lone pair electrons, leading to “rattling” Sn ions. On one hand, these rattlers remarkably suppress thermal conductivity, dissipating lattice energy via optical phonons located below 1.5 THz; on the other, they form electron-deficient Sn—S bonds leading to a p-type dopinglike effect and highly localized acceptor levels, simultaneously enhancing electrical conductivity and the Seebeck coefficient. This phenomenon leads to a 3 times reduced thermal conductivity and doubling of both electrical conductivity and the Seebeck coefficient, resulting in a more than 20 times increase in figure of merit, although still moderate in absolute terms
The legends and myths of nanotechnologies: what is a real nature of elastic properties of nanocrystallites
Data ingestion and assimilation in ionospheric models
<p style="margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px Times;">Current understanding of the ionospheric behaviour has been obtained through different observations, modelling and theoretical studies. Knowledge of the ionospheric electron density distribution and its fluctuations, high quality data sets, as well as reliable data ingestion and assimilation techniques are essential for models predicting ionospheric characteristics for radio wave propagation and for other applications such as satellite tracking navigation, etc., to mitigate the ionospheric effects on radio wave propagation. Effect of the ionosphere on Global Navigation Satellites System (GNSS) accuracy is one of the main factors limiting the reliability of GNSS applications.</p> <p style="margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px Times;">In accord with the objectives of the European COST 296 project, (Mitigation of Ionospheric Effects</p> <p style="margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px Times;">on Radio Systems, MIERS) under an international collaboration some new results have been achieved in collecting and processing high quality ionospheric data, in adaptation of the ionospheric models to enable data ingestion and assimilation, and in validation and improvement of real-time or near-real time ionospheric ionisation electron density reconstruction techniques.</p> <br />
- …