Changes in yield and composition of barley, wheat and triticale grains harvested during advancing stages of ripening

peer-reviewedThis study involved an evaluation of the changes in grain yield, nutritive value, ensilability and harvesting losses of intensively managed winter cereals harvested during the advancing stages of ripening. Five cereal crops (barley cv. Regina and wheat cv. Madrigal in 2001; barley cv. Regina, wheat cv. Falstaff and triticale cv. Fidelio in 2002) were assessed. Twenty plots per crop were arranged in a randomised complete block design, with five times of harvest (four for barley in 2002) and four replicate blocks per harvest. Dry matter (DM) yields changed relatively little between harvest dates, but fresh yields declined (P < 0.001) over time due to the moisture loss associated with ripening. Time-course changes in indices of nutritive value, such as concentrations of crude protein, starch and ash, and organic matter digestibility, were relatively small and did not follow a consistent pattern. Ensilability indices, such as DM and watersoluble carbohydrate concentrations and buffering capacity, indicated that satisfactory fermentations were likely if such crops were ensiled; buffering capacity, generally declining with advancing maturity. Harvesting losses were not clearly related to growth stage at harvest. It is concluded that winter cereal grain (barley, wheat and triticale) DM yields and quality were relatively constant as ripening progressed from DM concentrations of around 550 to >800 g/kg.One of the authors (P.S.) was in receipt of a Teagasc Walsh Fellowship

Birch bark tar in early Medieval England:continuity of tradition or technological revival?

International audienc

The Modeled Lifetime Cost-Effectiveness of Published Adherence-Improving Interventions for Antihypertensive and Lipid-Lowering Medications

AbstractObjectiveWe sought to compare the cost-effectiveness of different interventions that have been shown to improve adherence with antihypertensive and lipid-lowering therapy, by combining a burden of nonadherence model framework with literature-based data on adherence-improving interventions.MethodsMEDLINE was reviewed for studies that evaluated ≥1 adherence intervention compared with a control, used an adherence measure other than self-report, and followed patients for ≥6 months. Effectiveness was assessed as Relative Improvement, ratio of adherence with an intervention versus control. Costs, standardized to 12 months and adjusted to 2007 US$, and effectiveness estimates for each intervention were entered into a previously published model designed to measure the burden of nonadherence with antihypertensive and lipid-lowering medications, in a hypertensive population. Outputs included direct medical costs and incremental costs per quality-adjusted life-year (QALY) gained.ResultsAfter screening, 23 eligible adherence-improving interventions were identified from 18 studies. Relative Improvement ranged from 1.13 to 3.60. After eliminating more costly/less effective interventions, two remained. Self-monitoring, reminders, and educational materials incurred total health-care costs of$17,520, and compared with no adherence intervention, had an incremental cost-effectiveness ratio (ICER) of $4984 per QALY gained. Pharmacist/nurse management incurred total health-care costs of$17,896, and versus self-monitoring, reminders, and education had an ICER of $6358 per QALY gained.ConclusionsOf published interventions shown to improve adherence, reminders and educational materials, and a pharmacist/nurse management program, appear to be cost-effective and should be considered before other interventions. Understanding relative cost-effectiveness of adherence interventions may guide design and implementation of efficient adherence-improving program

Rabies Management Implications Based on Raccoon Population Density Indexes

An estimate or index of target species density is important in determining oral rabies vaccination (ORV) bait densities to control and eliminate specific rabies variants. From 1997–2011, we indexed raccoon (Procyon lotor) densities 253 times based on cumulative captures on 163 sites from Maine to Alabama, USA, near ORV zones created to prevent raccoon rabies from spreading to new areas. We conducted indexing under a common cage trapping protocol near the time of annual ORV to aid in bait density decisions. Unique raccoons (n = 8,415) accounted for 68.0% of captures (n = 12,367). We recaptured raccoons 2,669 times. We applied Schnabel and Huggins mark‐recapture models on sites with ≥3 years of capture data and ≥25% recaptures as context for raccoon density indexes (RDIs). Simple linear relationships between RDIs and mark‐recapture estimates supported application of our 2 index. Raccoon density indexes ranged from 0.0–56.9 raccoons/km . For bait density decisions, we evaluated RDIs in the following 4 raccoon density groups, which were statistically different: (0.0–5.0 [n = 70], 5.1–15.0 [n = 129], 15.1–25.0 [n = 31], and \u3e25.0 raccoons/km2 [n = 23]). Mean RDI was positively associated with a higher percentage of developed land cover and a lower percentage of evergreen forest. Non‐target species composition (excluding recaptured raccoons) accounted for 32.0% of captures. Potential bait competitors accounted for 76.5% of non‐targets. The opossum (Didelphis virginiana) was the primary potential bait competitor from 27°N to 44°N latitude, north of which it was numerically replaced by the striped skunk (Mephitis mephitis). We selected the RDI approach over mark-recapture methods because of costs, geographic scope, staff availability, and the need for supplemental serologic samples. The 4 density groups provided adequate sensitivity to support bait density decisions for the current 2 bait density options. Future improvements to the method include providing random trapping locations to field personnel to prevent trap clustering and marking non‐targets to better characterize bait competitors

Beef production from feedstuffs conserved using new technologies to reduce negative environmental impacts

End of project reportMost (ca. 86%) Irish farms make some silage. Besides directly providing feed for livestock, the provision of grass silage within integrated grassland systems makes an important positive contribution to effective grazing management and improved forage utilisation by grazing animals, and to effective feed budgeting by farmers. It can also contribute to maintaining the content of desirable species in pastures, and to livestock not succumbing to parasites at sensitive times of the year. Furthermore, the optimal recycling of nutrients collected from housed livestock can often be best achieved by spreading the manures on the land used for producing the conserved feed. On most Irish farms, grass silage will remain the main conserved forage for feeding to livestock during winter for the foreseeable future. However, on some farms high yields of whole-crop (i.e. grain + straw) cereals such as wheat, barley and triticale, and of forage maize, will be an alternative option provided that losses during harvesting, storage and feedout are minimised and that input costs are restrained. These alternative forages have the potential to reliably support high levels of animal performance while avoiding the production of effluent. Their production and use however will need to advantageously integrate into ruminant production systems. A range of technologies can be employed for crop production and conservation, and for beef production, and the optimal options need to be identified. Beef cattle being finished indoors are offered concentrate feedstuffs at rates that range from modest inputs through to ad libitum access. Such concentrates frequently contain high levels of cereals such as barley or wheat. These cereals are generally between 14% to 18% moisture content and tend to be rolled shortly before being included in coarse rations or are more finely processed prior to pelleting. Farmers thinking of using ‘high-moisture grain’ techniques for preserving and processing cereal grains destined for feeding to beef cattle need to know how the yield, conservation efficiency and feeding value of such grains compares with grains conserved using more conventional techniques. European Union policy strongly encourages a sustainable and multifunctional agriculture. Therefore, in addition to providing European consumers with quality food produced within approved systems, agriculture must also contribute positively to the conservation of natural resources and the upkeep of the rural landscape. Plastics are widely used in agriculture and their post-use fate on farms must not harm the environment - they must be managed to support the enduring sustainability of farming systems. There is an absence of information on the efficacy of some new options for covering and sealing silage with plastic sheeting and tyres, and an absence of an inventory of the use, re-use and post-use fate of plastic film on farms. Irish cattle farmers operate a large number of beef production systems, half of which use dairy bred calves. In the current, continuously changing production and market conditions, new beef systems must be considered. A computer package is required that will allow the rapid, repeatable simulation and assessment of alternate beef production systems using appropriate, standardised procedures. There is thus a need to construct, evaluate and utilise computer models of components of beef production systems and to develop mathematical relationships to link system components into a network that would support their integration into an optimal system model. This will provide a framework to integrate physical and financial on-farm conditions with models for estimating feed supply and animal growth patterns. Cash flow and profit/loss results will be developed. This will help identify optimal systems, indicate the cause of failure of imperfect systems and identify areas where applied research data are currently lacking, or more basic research is required

Perovskite-perovskite tandem photovoltaics with optimized bandgaps

We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of 17.0 % with over 1.65 volts open-circuit voltage. We also make mechanically stacked four terminal tandem cells and obtain 20.3 % efficiency. Crucially, we find that our infrared absorbing perovskite cells exhibit excellent thermal and atmospheric stability, unprecedented for Sn based perovskites. This device architecture and materials set will enable 'all perovskite' thin film solar cells to reach the highest efficiencies in the long term at the lowest costs

CCAT-prime: a novel telescope for submillimeter astronomy

The CCAT-prime telescope is a 6-meter aperture, crossed-Dragone telescope, designed for millimeter and sub-millimeter wavelength observations. It will be located at an altitude of 5600 meters, just below the summit of Cerro Chajnantor in the high Atacama region of Chile. The telescope's unobscured optics deliver a field of view of almost 8 degrees over a large, flat focal plane, enabling it to accommodate current and future instrumentation fielding >100k diffraction-limited beams for wavelengths less than a millimeter. The mount is a novel design with the aluminum-tiled mirrors nested inside the telescope structure. The elevation housing has an integrated shutter that can enclose the mirrors, protecting them from inclement weather. The telescope is designed to co-host multiple instruments over its nominal 15 year lifetime. It will be operated remotely, requiring minimum maintenance and on-site activities due to the harsh working conditions on the mountain. The design utilizes nickel-iron alloy (Invar) and carbon-fiber-reinforced polymer (CFRP) materials in the mirror support structure, achieving a relatively temperature-insensitive mount. We discuss requirements, specifications, critical design elements, and the expected performance of the CCAT-prime telescope. The telescope is being built by CCAT Observatory, Inc., a corporation formed by an international partnership of universities. More information about CCAT and the CCAT-prime telescope can be found at www.ccatobservatory.org.Comment: Event: SPIE Astronomical Telescope + Instrumentation, 2018, Austin, Texas, USA; Proceedings Volume 10700, Ground-based and Airborne Telescopes VII; 107005X (2018

Studying complex interventions : reflections from the FEMHealth project on evaluating fee exemption policies in West Africa and Morocco

Peer reviewedPublisher PD